Bernina Fan Club Archives
September 97
Sunday, September 7 - Saturday, September 13
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Sat, 6 Sep 1997 23:57:26 -0400 (EDT)
Subject: Re: Speaking of G Street
In the same strip mall is a Linens and Things, shoe stores, jewlery store,
toy store and a Syms (discount clothing store). Down the street is the White
Flint Mall.
Going the other way on 355 is one shopping center after another. You
couldn't be bored!
Cathy
----------------------------------------------------------------------
Date: Sat, 06 Sep 1997 16:29:20 -0500
Subject: Quilting Stitch
Is there a way to alter a stitch on the 1090S to simulate the quilting
stitch?
Christi
----------------------------------------------------------------------
Date: Sat, 06 Sep 1997 22:03:53 -0400
Subject: Flower Stitcher
I bought an attachment years ago that the box calls Flower Stitcher. I
used it on my 1530 and it did fine. It will not work on the 1630 at all.
I took it to my dealer-I bought it from her-and she tried it on the 1630
and finally decided that the wide feed dogs keep it from working. If
anyone knows of a way to make this attachment work please let me know. I
hate to have something and cannot figure a way to use it. Thanks.
- --
Bre
----------------------------------------------------------------------
Date: Fri, 6 Sep 1996 22:26:32 -0600
Subject: Re: Quillow Info Please
>I too would like to know what the quillow looks like and would like a
>complete set of instructions.
I picked up McCalls 8657 at a 99 cent sale to have written and pictured
instructions. They call it the Magic Quilt.
----------------------------------------------------------------------
Date: Sat, 6 Sep 1997 21:56:40 -0400 (EDT)
Subject: 1090 QE vs 1230 QPE vs 1260 QPE
I'd like someone to address the differences between these machines. Any info
would be greatly appreciated including prices. Thanks. Karen
----------------------------------------------------------------------
Date: Sat, 6 Sep 1997 17:54:50 -0400 (EDT)
Subject: Re: Sewserg.com
have found them VERY HELPFUL, fine service, knowledgeable etc. etc. and order
frequently from them because both small time Bernina dealers( in a one hour
drive from home ) NEVER have - in stock - feet, instructive books or the
particular supplies I am in need of at any given time. It has been
explained to me by both somewhat local dealers - they must purchase their
stock parts for resale to the public and this creates a great deal of
overhead for them and they are small- yadayadayada - and I am very
sympathetic with their situation. Seems to me Bernina should be stocking the
notions walls to satisfy demand and impluse purchases instead of the current
situation. so much for an opinion.
----------------------------------------------------------------------
Date: Sat, 06 Sep 1997 15:07:28 -0700
Subject: Fine Machine Sewing
Does anyone know of a source where I can order Fine Machine Sewing
by Carol Ahles at a discount. I know that I can order it from
Clotilde but would prefer not to order from Clotide since I have
heard some negative things about Clotilde from this list.
Kay
----------------------------------------------------------------------
Date: Sun, 7 Sep 1997 03:24:27 -0400 (EDT)
Subject: Ott lites
I purchased an Ott task lamp from a sewing catalog. Then I read here that
they were available from Office Depot. Well, I purchased a second task lamp
today for $40 instead of the $65 I paid for the first one. It is identical
except it lacks the handle and is black instead of grey.
Have you seen the Ott lite that clamps to the table? It has a gooseneck at
the top and bottom, with a rigid center section. This lamp sells for $85 in
the sewing catalog. I found the same lamp in Office Depot, made by Dana
lighting, #3825, cost of $30. I then purchased an Ott lite bulb for $9 to
replace the regular,
Non-ott PL 13 bulb included with this lamp. For $39 I have the clamp on Ott
lite. Check it out
BTW, the Ott bulb package says this bulb may be used in any PL13 fixture.
----------------------------------------------------------------------
Date: Sat, 6 Sep 1997 21:51:23 -0700 (PDT)
Subject: Need 160 help
My new 160 kept losing power today and rebooting back up when the power
returned. It was off only miliseconds, but was very annoying. I'm not
thrilled with talking with the dealer on Monday but guess I'll have to.
Ruth
----------------------------------------------------------------------
Subject: Re: Full Spectrum Fluorescents
Date: Sat, 6 Sep 1997 21:56:09 -0700
Not so, these tubes can be used in any fixture that supports flurescent (sp)
----------------------------------------------------------------------
Date: Sat, 6 Sep 1997 21:51:19 -0700 (PDT)
Subject: Crafters Choice problem
Teresa wrote: Would anyone have a phone number for them preferably the
Canadian one but the US one would also do. Teresa
Teresa, When I subscribed to this "club" they didn't do anything right,
wrong books came from order, no books when ordered, etc. I had a number
from the original order, since I'm skeptical of book clubs.
I called and called and the line was always busy, even in the middle of the
night. Letters were never answered either. Finally, I sent a registered
letter to them and it was finally resolved.
Ruth
----------------------------------------------------------------------
Date: Sun, 7 Sep 1997 08:33:31 -0400 (EDT)
Subject: Re: Te-Fal Iron
Hi Kate!
I bought my T-Fal at Penney's. I believe Target and Best Buy also carry
them. In fact, I ordered mine on line from Penney's. Let me know if you
need the catalog number.
Georgia
----------------------------------------------------------------------
Date: Sun, 07 Sep 1997 09:52:52 +0200
Subject: Virtuosa 160
I have bought a Virtuosa 160 a month ago and have been very happy with it,
although I admit I haven't used it that much so far. But I am worried
about all the messages I seem to have seen here saying that it is terrible!
Has anyone bought one that they are very happy with?
Laura
----------------------------------------------------------------------
Date: Sun, 7 Sep 1997 09:07:32 -0400 (EDT)
Subject: 170 & 180
I work for a Bernina dealer (exclusively Bernina). Linda, the store owner
said that the 170's and 180's are just incredible. They sew and embroider.
You can size a buttonhole by holding the button up to the screen. There must
be lots of other goodies too.
Rachel
----------------------------------------------------------------------
Date: Sun, 7 Sep 1997 08:44:08 -0400 (EDT)
Subject: Re: Show
I am going to the quilt show on Thursday afternoon with my friend Brenda and
possibly on Saturday or Sunday. E-mail me privately.
Bobbie
Would love to meet any on line friends too....
----------------------------------------------------------------------
Date: Sun, 7 Sep 1997 08:41:41 -0400 (EDT)
Subject: Re: 1260
I have had a demo model for a few years and have had no problems but my
dealer is great. It was overhauled bu Bernina before I bought it and I had
the same warranty as a new model. Do not know if all dealers offer the same
deal. I had one problem and she corrected it with no cost and it runs great.
Bobbie
----------------------------------------------------------------------
Date: Sun, 7 Sep 1997 08:38:17 -0400 (EDT)
Subject: Re: Flower Stitcher and 1630 Tension Problems
If you have a Bernina ruffler you have an adaptor on that just unscrew the
top portion and you will have it just be careful with the screw. Difficult
to describe but if you look at the ruffler you will see the part that is
removable.
Bobbie
----------------------------------------------------------------------
Date: Sun, 07 Sep 1997 09:22:56 -0500
Subject: Re: Illinois
In West Frankfort (just north of Carbondale on I-57) there is a small
shop Calico Country. In Marion & Carbondale, JoAnn Fabrics have a store
in each. Paducah has Hancock Fabrics--MUST SEE!. Jackman's has 3
locations in the St. Louis area (one is about 1 block from St. Clair
Square in Fairview Heights)--By far, Hancock's is well worth the trip
(about 45 minutes from Carbondale) They also mail order.
I grew up in the area and still make trips to visit parents. If you
learn of additional locations, let me know!
Janie
----------------------------------------------------------------------
Subject: Re: Speaking of G Street
Date: Sun, 07 Sep 97 09:00:37 PDT
Mary Ann and everyone else.....
Have I missed something, but where in Maryland is this wonderful
fabric store on G Street?
Judy
----------------------------------------------------------------------
Date: Sun, 07 Sep 1997 08:39:03 -0500
Subject: Re: Hourglass Pattern
Bernina wrote:
>
> Thanks. I'll ask my dealer. I didn't know it was a Bernina pattern. I
> was in the store today and did not see any of the "Side by Side"
> patterns. I wonder who else might carry them?
> Judy
> _____________________________________________
These ladies are free lance designers, and their patterns are wonderful.
They have another short sleeved jacket pattern and a skirt pattern which
are great.
The dress is designed to fit and I have seen it made in various fabrics
on different body types, and it is very slenderizing!!
Your Bernina dealer should be able to get these patterns. If you need
any more info, e-mail me, and I'll be glad to help you.
Karen
----------------------------------------------------------------------
Subject: RE: Time Out!!
Date: Sun, 7 Sep 1997 07:50:07 -0500
My shop keeps my machine less than a week!!
diana
..>>
Tell me, how long does your shop normally have your
machines when they are having just a regular, annual cleaning
----------------------------------------------------------------------
Date: Sun, 7 Sep 1997 11:05:58 -0500 (CDT)
Subject: Re: Ribbon Twist
This summer, I saw a pattern called Ribbon Twist in a quilt book at our
local quilt store. Now that I have decided that I desperately NEED this
pattern, the book is gone...and I can't remember the title. Can anyone
help?
Mary Jane
----------------------------------------------------------------------
Date: Sun, 7 Sep 1997 10:36:02 -0400 (EDT)
Subject: Re: Jane Garrison's Patterns
In a message dated 97-09-03 07:44:01 EDT, you write:
>>Jane Garrison, # 8 Greg Road, Spruce Pine, NC 28777, 704 765 9317
Joyce R. Carter, 286 Walnut Tree Cove, Cordova TN 38018, 901 758 0829
They also make an "hourglass" skirt pattern and a jacket/ vest pattern. I
tried the J/V on and liked them. Haven't made it yet, though. The vest is
my next project. >>
Sharon,
So glad to hear your arm is better and you can get back to sewing again.
You will love the jacket and vest pattern. I made a beautiful jacket out of
a "slubbed" silk in black and then used the skirt pattern in a black and gray
floral design. I get so many compliments on it. Just as you said, Jane's
patterns are flattering to all figure types.
Evelyn
----------------------------------------------------------------------
Date: Sun, 07 Sep 1997 15:30:41 -0400
Subject: Re: time out!
Hi Teresa,
I know what you're going through. How long did he say before you
could get it back?? I usually have mine done in June, and I make an
appointment so I can have it done that day. I bring it in for early
morning, then pick it up after I'm done shopping that night. I only
have an hour to drive to my shop, but I still hate to "waste" a trip
for a checkup and cleaning.
Lynda
----------------------------------------------------------------------
Date: Sun, 07 Sep 1997 13:21:50 -0500
Subject: Re: Flower Stitcher
>I bought an attachment years ago that the box calls Flower Stitcher. I
>used it on my 1530 and it did fine. It will not work on the 1630 at all.
>I took it to my dealer-I bought it from her-and she tried it on the 1630
>and finally decided that the wide feed dogs keep it from working. If
>anyone knows of a way to make this attachment work please let me know. I
>hate to have something and cannot figure a way to use it. Thanks.
>--
Bre
I bought one of these at my Bernina dealer, it came in a light blue box. It
works just fine on my 1630. My dealer demo it for me on a 1630. I use a #75
adapter.
Faye
----------------------------------------------------------------------
Subject: Re: dog toys, etc.
Date: Sun, 7 Sep 1997 12:07:48 -0700
Elaine wrote:
>I know that several people on this list make toys for their dogs.
>I am planning on trying some. First of all, where do you get the squeakies?
>The only place I have seen them is Clotilde at $.80 a piece. I seem to
>recall seeing them for $.50 somplace, but I don't remember where.
Try a craft store like Michael's for the squeakies. I have even seen them at
Northwest Fabrics or JoAnn's.
Last year I made beautiful Christmas stockings for my 10 granddogs and
grandcats (well they don't have children but they treat their animals like
they
are) as my daughters fill their stockings every year. I used the pattern in
the Thimbleberries Book Of Quilts substituting a quilted bone or cat figure
instead of the one shown. They were really neat and each animals name was
written on.
For toys my daughters make fleece "bones" according to size of the dog and put
squeakers inside each end. For the cats they make large sized mice with
tails
out of anything, cotton, whatever putting in some catnip with the filling.
Just be sure when making animal toys that you double stitch everything and
stuff pretty well.
Carol
----------------------------------------------------------------------
Subject: Re: Making Dog Toys
Date: 7 Sep 1997 09:13:23 -0800
In message Bernina writes:
> Also, I have found some fake fleece type stuff that is intended
> for teddy bear use, but it looks close to the Chewman style material. It
> is 100% polyester. I was also considering using up some polar fleece
> scraps. Has anyone tried this?
> Also, what shapes do you generally make?
> Any tips I don't know enough to ask for?
>
> Elaine
I have used polar fleece for dog toys before and depending on the dog it
didn't
work out for me. I have 5 dogs - Great Dane, Black Lab, shit-zu, and 2 min
pins.
They just tore them up. As for shapes I used a paper bag and drew a pattern of
a
gingerbread man as well as a duck. They turned out great. My dogs were just
too
aggresive. I have had alot of success with polarfleece for dog coats though.
Good luck!
Maggie
----------------------------------------------------------------------
Date: Sun, 7 Sep 1997 17:52:10 -0400 (EDT)
Subject: Re: Making Dog Toys
You should be able to find the squeekies in any craft or good-sized fabric
store. I have seen them at the local Fabric King/Mae's Fabrics and Joannes,
Michael's or Rag Shop stores probably also carry them, to name just the usual
chain stores.
Pam
----------------------------------------------------------------------
Date: Sun, 7 Sep 97 15:57:13
Subject: Avante Garde patterns?
This is the first time I have heard of AventeGarde patterns.
What more can you tell me? Whay type of styles, size range, availability?
Elaine
----------------------------------------------------------------------
Date: Sun, 07 Sep 1997 14:39:09 -0600
Subject: Re: Quillow Info Please
Bernina wrote:
> I too would like to know what the quillow looks like and would like a
> complete set of instructions. My have missed this on a previous post.
stitch this end of pocket to quilt here on the
end___________________________________|
| | |
| | [the quilt |
| the lines in the middle are
| | will fold |
| stitching lines to stitch the
| | into this |
| pocket to the quilt.
| | pocket | |
| |_________| |
| don't stitch this end down |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
|__________________________________ |
Bunny,
I know several people have posted the yardage needed to make this. This
is just a sample of what the quilt will look like unfolded. I couldn't
access the page where someone said that the full instructions with a
picture were posted. I've made these up in several different sizes.
The "pillow" part is just an extra little tiny quilt topstitched on the
two sides and the top to the large quilt. Leave the bottom part of the
"pillow" open to the quilt because you turn it inside-out and fold the
quilt into the little tiny quilt pocket to creat a "pillow" that can
unfold to become your quilt. These can be easily made by making a quilt
any way you want, [I usually tie my quilt] and then topstitching a
pocket in the middle of the top of the quilt. This pocket needs to be
at least 1/3 of the width of the quilt, so that the quilt can fold
lengthwise into thirds, then folded up to fit inside of this pocket. It
seems hard to explain, but is really simple once you've done one. These
are also great to keep in the car.
Kathy
----------------------------------------------------------------------
Date: Sun, 07 Sep 1997 17:06:54 -0500
Subject: Re: Fine Sewing Machine
Bernina wrote:
> Does anyone know of a source where I can order Fine Machine Sewing
> by Carol Ahles at a discount. I know that I can order it from
> Clotilde but would prefer not to order from Clotide since I have
> heard some negative things about Clotilde from this list.
>
> Kay
Kay...You can find toi book at Famous Fabrics in Monroe. connie
----------------------------------------------------------------------
Date: Sun, 7 Sep 1997 17:52:32 -0400 (EDT)
Subject: Re: Te-Fal Iron
I bought one of these irons a few months ago in Target.
Pam
----------------------------------------------------------------------
Date: Sun, 07 Sep 1997 19:45:45 -0400
Subject: Side by Side Patterns
I belong to a sewing group and intended to use the Side by Side Pattern in
an up-coming program. On calling the two names of the designers listed in
the "Digest" article, the first has not returned my call after four (4)
days and the other was extremely rude on the telephone. I still don't have
information.
They might be good designers but they need help in PR. I can do without
their patterns.
Charlotte
----------------------------------------------------------------------
Subject: Re: Fine Sewing Machine
Date: Mon, 8 Sep 1997 00:20:17 +0000
I was able to find it at Barnes& Nobles bookstore. You should be able to
get it at any bookstore.
Nancy
----------------------------------------------------------------------
Date: Sun, 7 Sep 1997 21:03:56 -0400 (EDT)
Subject: Re: Virtuosa 160
I bought a Virtuosa 150 and have been quite happy. My main circuit board did
go out on my the 2nd week I had it, but they replaced it.
The gal behind me in class had a 160 and was not happy with the tension
settings - so they are going to adjust her bobbin tension setting.
I'm not too happy about my mock quilting stitch, but I am hoping with playing
with needle size, tensions, thread weights, speed I sew, etc. that I will be
able to get a stitch I am happy with.
Good luck. It is easy to hear about the problems, but I'm sure there are a
lot of people out there that are very happy with their purchases.
Happy stitches!
----------------------------------------------------------------------
Date: Sun, 7 Sep 1997 21:45:33 -0400
Subject: Flower Stitcher
Why not combine the flower stitcher idea with "tying" quilts by machine?
I've come up with some lovely "flowers" that could be used. Experiment with
the non-satin-stitch stitches for ideas.
Judy
----------------------------------------------------------------------
Date: Sun, 7 Sep 1997 17:32:17 -0500 (CDT)
Subject: Ribbon Twist
A friend thinks the Ribbon Twist pattern was in a book called _Sweet
Dreams_. Is anyone familiar with this book...or where I might be able to
purchase it?
My DH and I just returned from admiring the quilts at the West Texas Fair.
Interestingly enough, it seems that the quilts that feature the most
intricate work don't win prizes. Does anyone else find this to be true?
Mary Jane
----------------------------------------------------------------------
Subject: Duct Tape Double / Hips
Date: Sun, 7 Sep 1997 18:44:47 -0700
A month or so ago, I posted my experiences in creating a DTD called Mable
II After a successful completion, and several uses which turned out
perfectly fitted garments, a friend and I decided that the hardest part of
fitting is pants. We worked out a way to make a form of our waist- hip-
thigh area.
I thought I would share the method with all you great sewists out there in
BFC land.
1. Wear a pair of tap pants/bicycle shorts, or some other pant that
reaches 5 to 6 inches above your knee.
2. *Tapee* stand on a chair at eye level to the *taper*
3. Wrap the waist, then the lower thigh - DO NOT tape the skin of the leg.
4. Using 6 - 8 inches strips of tape, wrap the hip portion of the body in
diagonal directions, starting at the waist
5. Continue wrapping over the abdomen, thighs, buttocks, etc., until
completely covered.
6. Use 1/2 width strips to tape the crotch from abdomen to lower center
back.
7. Use 1/2 width strips to tape the crotch from front left to back right
thigh. Repeat on opposite side [Be sure the *tapee* returns to a normal
stance ]
8. Continue taping until three layers of tape have been applied.
9. Using a black marker, draw lines horizontally to the floor on the sides
of the DTD about 3 inches above each other (this will give you an accurate
match to retape the cut-apart form]
10. Cut the taped form vertically - from side of thigh to side of waist.
Be Careful not to poke the person.
11. Step out of form!
12. Close the sides with duct tape, matching the black marker lines
13. Cut two circles the same circumference as your thigh and insert into
leg openings, tape to hold
14. Stuff with poly fil - TIGHTLY -
15. Trace the opening at the waist onto a paper by turning DTD upside down
on the paper and penciling around it. Use this for a pattern for the foam
core board.
16. Cut Foam core board according to paper pattern, and insert into the
waist opening, tape down lightly.
17. If your DTD is not good and firm, cut a slit in the form itself, and
stuff the areas that are not firm enough. Retape shut. Do that in any
area that is not FIRM.
18. Fit your pattern to this *duplicate you*.
19. Get perfect pants!!!!!
If anyone has questions beyond what I have addressed here, please feel free
to E me privately.
DeAnn & her 830
----------------------------------------------------------------------
Date: Sun, 07 Sep 1997 22:44:46 -0500
Subject: Re: Fine Sewing Machine
At 07:28 PM 9/7/97 -0500, you wrote:
>
>Bernina wrote:
>> Does anyone know of a source where I can order Fine Machine Sewing
>> by Carol Ahles at a discount. \
Try SoftWear Productions 1-800-297-9670. I don't remember the excact price
but about $18.00.
Faye
----------------------------------------------------------------------
Date: Sun, 7 Sep 1997 18:37:15 -0400 (EDT)
Subject: Sew Serg
With all the nice reports about Sewserg could someone please give me info on
them; is there a catalog? How would I contact them?
Thanks,
Carol
----------------------------------------------------------------------
Subject: Office Depot
Date: Sun, 7 Sep 1997 18:54:04 -0700
I don't work for the company. They have rotary blades for $3.99 and great
3 and 4 drawer plastic chests that can sit on your sewing or work table if
your table is deep enough. I bought one and back for 3 more. Joyce
----------------------------------------------------------------------
Subject: Crafter choice club
Date: Sun, 7 Sep 1997 18:52:05 -0700
I am grateful for your input about this club, I have considered joining
many times and could not seem to pick out enough books I wanted at the same
time. I am annoyed by many of the mail I receive about sewing books, they
break down the price into payments so I have to mentally calculate the
actual cost, then I review the whole thing and can't find where they say
how much the shipping cost is. I have a thing about shipping costs since I
ordered from Eleanor Burns. I happened to notice the cost on the box and
then on my sale slip. It was considerably more on the sales slip. I
called them and said to them it was ok with me if they needed to raise
their prices but I don't feel like paying almost double on the shipping and
I request a refund for the difference. After some silly so called reasons
why they do that to their customers they gave me a refund and I never
bought from them again. Joyce
----------------------------------------------------------------------
Date: Sun, 7 Sep 1997 20:47:22 -0400 (EDT)
Subject: Re: Quilt Stitch
Christi,
Go to Bernina's Home Page, select FAQ (frequently asked questions - question
#3)
It has good information on Bernina's quilting stitch for most of the
different machines.
Type of thread, tension, etc.
Click here to go to: http://www.bernina
usa.com
Hope this will help you.
Barbara in Spring
----------------------------------------------------------------------
Date: Sun, 07 Sep 1997 14:58:22 -0500
Subject: magnifying glass for 1090QE
Does anyone know if the magnifying glass that attaches to the front of
the machine as seen in Keepsake Quilting and Nancy's Notions can be used
on the 1090QE? If so, I'm wondering how it is attached to the machine
and if anyone can give me some advice on this subject. Thank you, Joan
----------------------------------------------------------------------
Subject: Hair Comb Scrunchies
Date: Sun, 7 Sep 1997 23:23:49 -0700
Does anybody know where I can find a pattern for the combination
hair comb/scrunchies? I don't have a sample to go by, otherwise I
could probably figure it out, so need a little help instruction and picture
wise. I have simple written instructions, but without some more detail
to it I'm a little confused. Also need the different ways they can be
worn. TIA
Glennie
----------------------------------------------------------------------
Subject: Ott for over the machine!
Date: Sun, 7 Sep 1997 18:11:11 -0500
I was very interested in the post the other day where someone described
how they had purchased a work light and used the ott bulbs.
I have a friend who purchased the swing-arm version of the ott light
and loves it. I was going to check out my local Office Depot or
Home Depot to see if they have a cheaper model of this light.
Now, I'm wondering if there is a ott light bulb? I already have a
swing-arm light on my sewing table and a three light pole lamp on
the left of my sewing table. I like the pole light because I can
aim the lights right where I want them.
It would be great if Ott makes light bulbs and if I could use them in
my existing lamps. Hope someone can help with this.
Also, in regard to the thumb tack taped to machine for circular sewing,
did'nt I see this in the current issue of "Threads"?
Jerry Sue
----------------------------------------------------------------------
Date: Mon, 8 Sep 1997 06:53:05 -0400 (EDT)
Subject: Re: Speaking of G Street
G Street used to be in downtown Washington D..C. on G Street. Now it is at
11854 Rockville Pike(at Montrose) in Rockville,MD. Their second location is
in Centerville, Va.at 5077 Westfields Blvd.(10 miles south of Dullas off
Route 28) Jill :>}
----------------------------------------------------------------------
Date: Sun, 7 Sep 1997 21:00:19 -0400 (EDT)
Subject: Re: Virtuosa 160
I bought a Virtuosa 150 and have been quite happy. My main circuit board did
go out on my the 2nd week I had it, but they replaced it.
The gal behind me in class had a 160 and was not happy with the tension
settings - so they are going to adjust her bobbin tension setting.
I'm not too happy about my mock quilting stitch, but I am hoping with playing
with needle size, tensions, thread weights, speed I sew, etc. that I will be
able to get a stitch I am happy with.
Good luck. It is easy to hear about the problems, but I'm sure there are a
lot of people out there that are very happy with their purchases.
Happy stitches!
----------------------------------------------------------------------
Date: Mon, 8 Sep 1997 06:44:31 -0400 (EDT)
Subject: Re: Quillow Info Please
Quillow written instructions are one the www quilting page. The URL for it
is:
http://quilt.com/Quilt.html Jill :>)
----------------------------------------------------------------------
Subject: Quillow
Date: Mon, 8 Sep 1997 01:42:00 -0700
I have made several attempts to respond to people on this list and send
them information on the Quillow. For some reason several have come back as
undeliverable. So..if anyone wants instructions please write me direct.
Joyce R
----------------------------------------------------------------------
Date: Mon, 8 Sep 1997 09:01:19 -0400
Subject: re:Illinois
Hi all,
Message text written by Bernina:
>Im thinking of moving to Southern Illinois. Carbondale in Jackson
County. Does any one know if there are any Fabric stores. Sewing
groups, classes and most important a Bernina dealer. Its an hour from
Paducaha and about an hour from St Louis.
Laurel>
Laurel, Pducah has the original Hancock's Fabrics and Web of Thread. They
also have a quilt shop and the American Quilt Museum (exact name?). I know
there is a Bernina dealer somewhere in the area. Try calling BerninaUSA to
find out the closest one (1-800-405-2sew). If you want a more detailed
list of sources in the Paducah area email me privately and I will dig up
what I have.
rivka
hi mom!
----------------------------------------------------------------------
Date: Mon, 8 Sep 1997 09:01:13 -0400
Subject: Re: Sewserg.com
Hi all,
You post:>>
Anyway, I have been reading the replies to the "Sewserg.com" question
and
I have a question. Whay is "Sewserg.com"? Do they sell exclusively
sergers or
do they carry other machines and sewing supplies? Where can the be
found on the web?>>
Sewserg.com is the web site for All Brand Sewing. A mail order source for
all manner of sewing related things. URL is http://www.sewserg.com.
rivka
hi mom!
----------------------------------------------------------------------
Date: Mon, 8 Sep 1997 09:01:17 -0400
Subject: Ott Lite
Hi all,
regarding all this talk about Ott-lites. Way back when, about 8 months ago
maybe, we had a similar discussion of Ott-lites - the Office Depot one vs
the sewing/craft one, replacement bulbs, etc. Someone called Ott-Lite and
asked them to clarify this issue and specifically if there was a difference
in the lighting spectrum of the two bulbs. The OL people replied that
there WAS a difference in the office store version bulbs and the
sewing/craft version bulbs. They also have a web site. Easy to search for
- - the key words Ott-Lite gets you them.
For what it's worth,
rivka
hi mom
----------------------------------------------------------------------
Date: Mon, 8 Sep 1997 09:01:15 -0400
Subject: re:Quillow Info Please
Hi all,
you write:>>
I too would like to know what the quillow looks like and would like a
complete set of instructions. My have missed this on a previous post.
Please respond privately so I can make sure I get it. >>
There is a website that gives complete instructions and diagram of a
quillow.
http://ares.redsword.com/dduperault/quillow.htm
I haven't tried it yet but it is on my list of project wannabes
Hope this helps.
rivka
hi mom!
----------------------------------------------------------------------
Date: Mon, 08 Sep 1997 07:49:49 -0500
Subject: 1260PE
Has anyone else been having trouble with the tension on the 1260PE? I have
only had mine 3 months and have already had it in once for the tension and
now I seem to have a problem with the bottom bobbin case. It keeps
catching the thread and I end up starting and stopping every five minutes
because the bobbin thread catches and then totally stops coming out.
Anyone else with this problem? karen
Karen
----------------------------------------------------------------------
Subject: Re: Virtuosa 160
Date: Mon, 8 Sep 1997 07:54:35 -0400 (EDT)
Hi Laura and BFC
I bought the 150 with the knee lifter option about 2 months ago
and I'm VERY happy with it. I'm quilting up a storm - poor kids and
husband:-)
The only problem I have is that they advertised being able to purchase
the software to change the stitches and now they are saying you HAVE
to go back to the dealer to do this. This is a real pain for me
and I have a call into the customer support manager about this.
I feel that if they advertised it it should be available.
The dealer isn't thrilled with this either.
I LOVE the knee lifter and the mock hand quilting stitch.
I LOVE the 1/4 piecing foot.
I'm not thrilled with the walking foot - it jumps alot and makes
my eyes tired but I was getting used to it.
Luckily I could do alot of the hand quilting stitch with the piecing foot.
I have to second what someone said earlier about having Bernina
supplies in stock. I've been waiting for weeks for the open-toe
embordery foot I ordered - it's in back-order.
And stuff that's not in back-order usually takes 2 weeks to get.
They have some of the feet for the old line but none for the new line.
I hope this changes over time.
Just for reference I had been using the same sewing machine for the
last 25 years (or more) - it's a Singer Fashionmate I bought with
a summer's worth of babysitting money at a very young age.
It still is a fine machine but couldn't do all the machine quilting stuff
I wanted to do. This machine was a real splurge for me.
have fun!
charlotte
----------------------------------------------------------------------
Date: Mon, 8 Sep 1997 09:56:19 -0400 (EDT)
Subject: Re: Speaking of G Street
Hi Judy,
G Street is located on Rockville Pike in the Mid -Pike Shopping Center in
Rockville Md. It is called G Street because of its prior location. If you
ever visit the D.C. area you really should add it to your list of places to
visit along with all the tourist sites. Not only is it a fantastic fabric,
notion, quilting,and decorating store it has a wonderful Bernina
department.AND the other shopping iin the area is great,too!
Now I have a strange question for my BFC friends who have visited both G
Street and Mary Jo's in North Carolina. I have a daughter who attends
UNC-Chapel Hill. As you might have guessed I live very close to G Street and
vist there quite regularly. Mary Jo' s as I understand it is about 2-3 hrs.
from Chapel Hill. It's my daughter's last year there so I was wondering if I
should try to make the trip to Mary Jo's during one of my visits this year.
Would it be worth the trip? I have heard that Mary Jo's is great but would
it have much more or much different than G Street to justify at least 5
hours of driving. Your opinions would be greatly appreciated.
TIA and have great week!
Julie
----------------------------------------------------------------------
Date: Mon, 08 Sep 1997 08:27:24 -0500
Subject: Missing Fabrics Web Page
Hey guys, I just found a neat webpage that has already helped me out in
finding some fabric I was missing! Pat Knox has a webpage that is
devoted to finding missing fabrics, books, tools...etc. You know, that
book you passed up in the store that you could kick yourself for not
buying because it's gone now? Or the fabric you didn't get enough of?
Best of all, her services are completely free!! Her page is at:
http://www.knoxgroup.com/missingfabrics/
Take a look! You might need it one day. Who knows, you might be able to
help someone else in need. I try to visit it regularly.
Christi
----------------------------------------------------------------------
Date: Mon, 08 Sep 1997 08:06:47 -0700
Subject: Olfa extension
Micky you wrote
>
> One reason I like Burda and AvanteGarde patterns is that there's no seam
> allowances; you have to use your Olfa extension to add seam alas you lay out
the pattern, you can actually see where the match will be. Be
> aware that AvanteGarde patterns are designed for flat chested women! (Or at
> least flatter chested than me.)
>
HI!
What is a Olfa extension? I live in and here we connot find too
many sewing notions. Is it a special ruler or is it just a way of saying
to mark your own seam allowances. Sorry, my english is not too good, but
I enjoy so very much this web.
I have a 1080 It is a simple one since here we do not have a Bernina
dealer. I didn't want to take a risk buying a computerized one because I
was afraid that here there would be nobody that could give me the
service necesary.
Bye, Cusy
----------------------------------------------------------------------
Date: Mon, 08 Sep 1997 18:23:53 +1000
Subject: Re: Ribbon Twist
Mary Jane
Was this a log cabin pattern called ribbons. Its black with several
colors running thru it to look like woven ribbons.
Laurel
----------------------------------------------------------------------
Subject: RE: Fine Sewing Machine
Date: Mon, 8 Sep 1997 10:45:37 -0400
I got mine from www.barnesandnoble.com and it had a 30% discount of the
actual original retail price....there is a shipping charge but if you buy
more than one book, it works out to still be a bargain overall. I usually
choose ground shipping, but both times they have upgraded me to 2-day air
for free (which is nice, if unexpected).
hope this helps
Michele
----------------------------------------------------------------------
Date: Mon, 08 Sep 1997 09:19:03 -0500
Subject: Re: 1090 QE vs 1230 QPE vs 1260 QPE
YOU WROTE:
"I'd like someone to address the differences between these machines. Any info
would be greatly appreciated including prices. Thanks. Karen"
The main difference between the 1090 (whether it's plain, "s" or "QE") and
the 1260 (or its earlier version, the 1230), is MEMORY.
The 1260/1230 has more memory, and has alphabets. It is a great machine.
The 1090 is almost as good, and is certainly plenty fine for someone who
mainly sews quilts. The 1090s and 1090QE have a memorized buttonhole
feature like the 1260. The older, plain 1090 does not.
Either machine will make you very happy every time you sew on it! If you
can afford the 1260, get it.
my 2 cents...
Kim
----------------------------------------------------------------------
Date: Mon, 8 Sep 1997 08:58:57 -0500 (CDT)
Subject: Fitting Books
Alberta mentioned the fitting textbook by Leichty, Pottberg and Rasband. I
have the book and it's companion, Fabulous Fit, by Judith Rasband. I use
both of the books in my fitting classes. I have found that Fabulous Fit is
easier for homesewers to use, and is an excellent resource; the textbook
takes many pages to explain minute details like supplies. I saw Fabulous
Fit in the new Clothilde catalog, but it can also be ordered at Barnes and
Noble, and Borders. I have taken workshops from Judith Rasband, and have
found her hinged seam alteration method to be easy, accurate, and
non-distorting to the pattern. In defense of the textbook, there is a
detailed discussion of the various pattern companies, and the differences in
their slopers.
Just a few thoughts, IMHO.
----------------------------------------------------------------------
Date: Mon, 08 Sep 1997 15:12:18 -0700
Subject: Re: Illinois
> Im thinking of moving to Southern Illinois. Carbondale in Jackson
> County. Does any one know if there are any Fabric stores. Sewing
> groups, classes and most important a Bernina dealer. Its an hour from
> Paducaha and about an hour from St Louis.
> Laurel
I have never been there but I have a catalog from Hancocks of Paducah.
I would love to be able to visit that store. They have some good
prices on sewing notions. You can get a pair of 8" Ginghers for
$19.00 which retail for $30.00. You should be able to find out about
Bernina dealers by going to the Bernina of America homepage. The
url address for Hancocks of Paducah is
http://www2.hancocks-paducah.com/hancocks/sampler.html
Hope this helps.
Kay
----------------------------------------------------------------------
Date: Mon, 8 Sep 1997 15:30:09 -0400 (EDT)
Subject: Needed: Plans for Quilting frame
Does anyone have the plans for a quilting frame that my husband could make
for me? I would love to have one (especially one that is easy to put up and
take down.)
Love to hear from anyone willing to share.
----------------------------------------------------------------------
Date: Mon, 08 Sep 1997 11:38:05 -0500
Subject: Sewserg
"Sewserg" (their actual name is something else) is a mailorder
company that sells sewing machines, sergers, embroidery machines,
embroidery cards, etc. They've been around quite awhile, and I've
seen quite numerous posts the last couple of years from satisfied
customers; I've never seen a negative post about them. They can't
always sell every brand of machine to everyone (e.g., with some
brands if there is a dealer in your area, they can't mailorder to
you, although some people get around this by having a friend or
relative who lives elsewhere do the mailordering). They used to
sell Bernina machines, but I no longer see them on their website
so don't know if they still do. They sell refurbished machines
and demo's as well as completely new machines. They're a great
resource for people who lives mucho miles from dealerships. I
also use their website to get an idea of base prices on machines
I'm interested in; this is helpful when you go into a dealership,
to have an idea of a base price as well as the manufacturer's
suggested retail price -- to decide on what price in between might
be fair and not excessive.
The website is http://www.sewserg.com (If I typed this correctly
and it is highlighted in your text, you can just click on it to
go there.)
Mary
----------------------------------------------------------------------
Date: Mon, 8 Sep 1997 11:04:10 -0400 (EDT)
Subject: sewserg,quillows
I read in the digest about this company but am unable to find them on the net
can someone please tell me if I have the correct e-mail address
(www.sewserg.com). thank you.
Also on 2 Sept. Elaine asksed about the walking foot for the 1630, I
have this foot and have been using it for about a year now I love it and
wouldn't trade it for anything.
Lastly, on 3 Sept. someone mentioned a Quillow. What is this is it like a
Secret Pillow? I just finished one for my 2 1/2 year old, it was quite
simple to do just wondering if they are the same thing.
This is my first time on line my husband has finally taught me how to use the
computer. I've enjoyed reading the digest so far.
Thanks, Colleen
----------------------------------------------------------------------
Date: Mon, 8 Sep 1997 16:16:32 -0400 (EDT)
Subject: Cloth Doll Exhibit
For those of you in Northern CA who make cloth dolls on your Berninas or are
interested in cloth dollmaking, there will be a wonderful cloth doll exhibit
in Oakland on Sept. 19th and 20th:
National Cloth Doll Makers Association
5th Biennial Cloth Doll Festival and Exhibit
Oakland (CA) Marriott City Center
1001 Broadway, Oakland, CA
Friday 9/19/97 10am - 8pm & Saturday 9/20/97 10am - 4pm
Admission $5.00
The exhibit will have about 1000 dolls on display, including the "Figure in
Cloth" doll exhibit, dolls by Virginia Black and the Cloth Doll Magazine
"Challenge Dolls". Admission includes entry to the Sales Room where there
will be vendors of all kinds of great stuff not just for cloth doll makers
but for other sewers, too.
No affiliation, etc. etc., other than being an obsessed cloth doll maker,
sewer and sewing machine lover. Oh yes, and I'm attending this event for all
4 glorious days! This will be my 2nd time - I attended in 1995 and had more
fun than I can begin to describe here.
Hope some of you can make it.
Valerie
----------------------------------------------------------------------
Date: Mon, 08 Sep 1997 15:23:37 +0100
Subject: newby
I am a "newby" to the Bernina, just purchased my first from a fellow
quilter who went to the "Top 'O the Line". I now have a 1030, I have only
played a bit on it as the weather here in San Diego has been blazing hot
for over 2 weeks. I am strictly a quilter, all of my efforts at making
garments have been a fitting disaster! Any suggestions from the Bernina
wizards out there?
I read the tip about the thread to use and can't find the Mettler(sp) brand
anywhere. I normally use the Xlarge 100% cotton spools, these come on a
cardboard core. Is this bad? What about winding the bobbin? I have also
used this same thread and have had no problems. Let me know what works well
you the other 1030's out there.
I do not have a #37 foot yet, the person I bought from, said she only used
the adhesive that sticks on the machine to get the accurate 1/4" seam. (I
could have done that with my old machine, which is one reason I have been
looking for a Bernina.)
I am feeling intimidated, as I read all of your messages, maybe my machine
is smarter than I am, YIKES!
**As a side bar, there have been so many comments about the tragedy of
Princess Diana's death. I was as sickened as everyone, and I thought of
all the times I have been in the check-out line of the local supermarket
and been disgusted at the tabloids. (Not just about her, in general) On
tuesday, I stopped in to see the manager and request that the tabloids be
PERMANENTLY removed from such a prominent location. He remarked that he
would take my request under advisment, luckily on saturday when I stopped
in the tabloids were gone! I thanked him personaly and he said not one
checker had gotten a request for any of the issued normally placed there.
A idea that worked!
Take care and happy sewing-Lin
----------------------------------------------------------------------
Date: Mon, 8 Sep 1997 18:18:41 -0400 (EDT)
Subject: Re: Sewserg
They have a web site at www.sewserg.com
----------------------------------------------------------------------
To: Bernina@ttsw.com
Subject: Re: Fine Sewing Machine
Kay,
Softwear Productions has it for $18.98, 1-800-297-9670, or
www.softwearproductions.com or send e-mail to softwear@juno.com. Their
prices are great and they send the order out quickly.
Milly
----------------------------------------------------------------------
Date: Mon, 8 Sep 1997 14:21:51 -0400
Subject: Re: Speaking of G Street
Judy,
G Street is at 11854 Rockville Pike, Rockville, MD, 301-231-8998. If you
call Montgomery County MD visitors bureau at 800-925-0880, they will send
out info about the area.
I have never been there, but have heard about it for years and can't wait
to go. I'm thinking about next Saturday. Maybe I'll see you there!
Mary Ann
----------------------------------------------------------------------
Subject: sock monkey
Date: Mon, 8 Sep 1997 21:58:25 -0700
Hi: I am interested in making the sock monkey as it is shown on the Carol
Duvalle show. I have checked the web site and type in sock monkey but it
has only turned up ready made or kits for sale. I checked with the Carol
Duvalle show and they give a store in Vermont. I live in CA. I need to
know the name of the company that makes the sock because the pattern is
inside. Any help you can offer will be greatly appreciated. E-mail me Thank you.
----------------------------------------------------------------------
Date: Mon, 08 Sep 1997 20:45:38 +0000
Subject: Re: Crafters Choise Problem
I also had a problem with Crafter's Choice Club. They never answer
their 800 number. If it is not busy, which is usually the case, there
is no answer. There shipping and handling costs are the highest I have
seen. I can buy most of the books at the bookstore and pay about the
same price that the Club averages out to with the extra costs. Many of
their books are on the markdown counters while the Club is charging full
price. It took months to straighten out a problem. I'll never buy from
them again. Dot
----------------------------------------------------------------------
Date: Tue, 9 Sep 1997 07:10:09 -0400 (EDT)
Subject: re: tying a quilt with single pattern
Hi there!
I am trying to tie a baby quilt using the heart pattern on my 1530, as I
believe I've seen someone suggest on this list. When I select the pattern,
and choose it to sew just once, then secure the ends automatically, I get the
heart, but also about 3 tiny horizontal stitches on each end of the heart. It
looks a little funny. Does anyone have any suggestions on how to get just the
heart itself? These little stitches look like those that would link the first
heart to a second...however, I am sure I hae selected the "1" pattern repeat.
Thanks.
Maggi
----------------------------------------------------------------------
Date: Mon, 8 Sep 1997 19:18:17 -0400
Subject: re:Fine Sewing Machine
Hi all,
Kay writes:>>
Does anyone know of a source where I can order Fine Machine Sewing
by Carol Ahles at a discount. I know that I can order it from
Clotilde but would prefer not to order from Clotide since I have
heard some negative things about Clotilde from this list.>
I wonder if SoftWear Productions would carry it. 1-800-297-9670. If it is
not in their catalog they may still have it.
rivka
hi mom!
----------------------------------------------------------------------
Date: Mon, 8 Sep 1997 16:07:48 -0400 (EDT)
Subject: Re: Time Out!!
Teresa--
I had my machine to the shop just the other day for it's checkup. Since I
live 90 miles away, I called ahead and they were very nice and serviced the
machine in the three hours I spent shopping in the area. So I was ablle to
take my 'Nina back home with me. Of course, this is for a 2 year old 1630
with no noted problems.
I might add that this is Martha-in-the-Ozark's shop, so I'm sure most of you
will agree I am very fortunate, indeed!
Anyway, if you really can't stand being without your beloved 'Nina, next time
try calling ahead of time and see if they will accomodate you.
Mary
----------------------------------------------------------------------
Subject: Re: Illinois
Date: Mon, 8 Sep 1997 15:57:02 -0500=
Jo Anne Fabrics is in Carbondale which has Chuck's Calico Express located
within that sells Bernina.
----------------------------------------------------------------------
Subject: Re: Fine Machine Sewing
Date: 09 Sep 97 07:28:17 -0500
>
> Does anyone know of a source where I can order Fine Machine Sewing
> by Carol Ahles at a discount. I know that I can order it from
> Clotilde but would prefer not to order from Clotide since I have
> heard some negative things about Clotilde from this list.
>
> Kay
I saw it in the latest Purchase For Less catalog.
Terri
----------------------------------------------------------------------
Date: Tue, 9 Sep 1997 07:54:52 -0400 (EDT)
Subject: Fine Machine Sewing
Edward Hamilton Booksellers in Conn. have this book at a discount. They also
have a website if you do a search. They are a great company and have many
closeout books also. I have gotten some wonderful buys from them. Edward R.
Hamilton, Fallls Village, Ct 06031-5000 They also send out a newsletter.
Great buys!
Not affiliated, just a happy customer.
----------------------------------------------------------------------
Date: Tue, 9 Sep 1997 08:23:01 -0400 (EDT)
Subject: Thanks
Hi all
Thank you to all those who answered my fitting book query.
BTW does anyone still have that funny letter "written" by Martha Stewart? If
so, I would appreciate a copy. TIA
Sara
----------------------------------------------------------------------
Date: Tue, 9 Sep 1997 08:02:18 -0400
Subject: Re: Fine Machine Sewing
The Edward R. Hamilton flier that arrived yesterday lists Fine Machine
Sewing at $17.46 plus $3 for shipping.
Web site is: www.hamiltonbook.com Mail order at Falls Village, CT
06031-5000. No 800 number.
Trudi
----------------------------------------------------------------------
Subject: Re: Crafters Choice Club
Date: Tue, 9 Sep 1997 09:11:01 -0700
I too received the flyer for Crafter's Choice. Check out the price listed
for Nancy Zieman's new book Sew Easy Embellishments $29.95/$24.95. The
same day the new Nancy's Notions catalog arrived. The book is offered
there for $16.95 and even with the $4.95 shipping is less than Crafter's
Choice.
----------------------------------------------------------------------
Subject: Quilt and Fabric Stores in Tennessee
Date: Tue, 09 Sep 97 08:23:11 -0500
Hello Fellow Bernie Owners:
I will be traveling to Nashville, Knoxville and Gatlinburg the first of
October. Are there any really neat quilt or fabric stores or Bernie Dealers
in this area. I'll be in the area for a week and would love to check them
out. Even if there is really something great in FAR western North Carolina,
I'd like to know about it.
I am soooo for behind my in reading my digest I don't think I'll ever get
caught up. But I shall begin wading through this week.
This is such a great listserv and I have learned sooo much. Thanks to all
who contribute!!!
Bye for now,
Mary
----------------------------------------------------------------------
Date: Mon, 8 Sep 1997 22:29:23 -0400 (EDT)
Subject: Matchhing Plaids
>Subject: Re: Matching Plaids
>Elaine inquired into using a walking foot for matching fabric repeats.
My 2c.
1, Fold the fabric against itself selvedge to selvedge lengthwise, then cut
edge to cut edge crosswise, then fold across a corner on the bias, each time
check if the arrangement of threads matches or not. True Tartans match
absolutely, many checks and plaids do not.
Sometimes they match in just one direction, so that although the warp
(lengthwise) threads are arranged in a pattern of, say, 3Red 3Blue 3Green
3Yellow 3Green 3Blue 3Red 3Blue 3Green 3Yellow 3Green etc, the weft (side to
side threads) may be 3Red 3Green 3Purple 3Pink 3Red 3Green 3Purple 3Pink etc
etc.
Depending upon how the pattern matches you will have to decide how you will
incorporate it into your garment.
The effect of a pattern being mirrored exactly on either side of the centre
front/centre back and that of the pattern travelling clockwise round the
body may be very different.
2, Where is it most important that patterns match? Usually it is better to
have the horizontal lines match across the chest/arms, across the bust,
across the hem. In a perfect world horizontal and vertical patterns would
match but our bodies arent perfect let alone the world.
3, The larger and more definate the pattern the greater care is
needed................start off with a tiny check that won't show, rather
than a huge BLACK/WHITE/SCARLET Windowpane check.
4, Make a simple garment first then try the more challenging.............. a
straight skirt is easier than a jacket with pockets, lapels, two piece
sleeves, and all the rest.
5, BUY GOOD QUALITY STUFF..............it is more likely to be accurate. a
printed 'fake' check may be well and truly off grain.
Liz
----------------------------------------------------------------------
Date: Tue, 09 Sep 1997 07:49:59 -0700
Subject: New Owner and subscriber
I purchased a 1080 last week and joined this list shortly afterward.
After years of using a Singer Featherweight exclusively, I am still a
bit intimidated by this computerized machine.
The shop owner(45 miles away) who acted as agent for the dealer(100+
miles away) was very helpful in showing me the various stitches, and how
to use the machine, but even with the manual, which is bare-bones to say
the least, I am still struggling along. I realize it will take practice,
but it's a rather slow go.
I tried doing some work on a quilt block, using the zigzag as a satin
stitch for jack-o-lantern eyes, nose, mouth, etc., varying the stitch
length to go from wide to narrow ( as in the triangle shapes of the
eyes), and ended up with threads bunched on top of each other, and the
machine making a sound like the gears were grinding! What did I do
wrong, and how do I do it right?
I'm also curious about all the feet and accessories that are available
for the machine. I'll be attending a couple of large quilt shows that
will probably have Bernina reps there, this weekend, and next month in
Houston. I'm wondering what your experiences have been as far as
obtaining the best prices - are shows good places to buy accessories?
Is the online place recently discussed better? Or should I contact the
dealer for these? And is there a comprehensive list of all the "extras",
including books, tables, cabinets, carrying cases, as well as the feet,
etc., on line?
I suppose you can easily tell what a newbie I am to this - just looking
for guidance from those who have been there.
Thanks in advance.
Becky
----------------------------------------------------------------------
Date: Tue, 9 Sep 1997 11:23:45 -0400 (EDT)
Subject: Hourglass Patterns
FYI . . . These patterns are done by two sewing specialists from Bernina.
Jane Garrison and Joyce Carter. If anyone will be at the Quilts at
Crossroads show (consumer show) in Flint, Michigan Joyce will be there with
many of these samples.
----------------------------------------------------------------------
Subject: OTT - QUILLO - ETC!
Date: Tue, 9 Sep 1997 10:20:47 -0500
Thanks to those of you who sent me the address for Software Productions.
Arthritis is killing me today so I've made a stack of sewing books, etc.,
(husband calls this "making my nest") and am ready to pile up, rest, browse
and make out an order list.
I talked to someone at Office Depot and tomorrow I am going there and
purchase the swingarm light that will accept the ott bulbs ($29.00)
and a bulb. Will move present swing-lamp over to table with painting
suppies on it. (Oh yes, I do it all - or try too!) You know, the one with
the most "stuff" when they die, wins.
Hankcocks once handed out a flyer with color photos on it of instructions
on making a Quillo. It is simply a quilt that has a pocket on the reverse
side in one corner with the opening to the outside edge. You simply fold
the quilt up and on the last fold it slides into the pocket. It then makes
a case for the quilt and the case is a pillow. You can also put a strap
on it for carrying. If you have one in the car when traveling, you have a
pillow or instant "blankie".
Now, I'm going to take my pillow and blankie to my nest!!!!!!
Jerry Sue
----------------------------------------------------------------------
Subject: Mary Jo's
Date: Tue, 9 Sep 1997 11:05:34 -0500
Hi all,
I never been to G Street but I'll keep it in mined next summer when I travel
north But Have been to Mary Jo's and the fabric is great and the prices are
even better! so much to choose from I wished I lived closer but I dont think
I
would travel 5 hours out of my way. I happen to have a sister who lives in
Columbia, S.C. and we went from there.
Emily
----------------------------------------------------------------------
Date: Tue, 09 Sep 1997 15:07:00 +0100
Subject: What foot for piping?
Hello. My name is Sue and I'm the very proud owner of a 1260QPE (my
first and last Bernina). I'm still finding out about my machine and
although I've had my free lesson which came with it, I would appreciate
advice on the following: I've just painted and decorated our bedroom
and now want to sew new curtains and headboard cover which I want to
pipe. I can't find anything in the manual to tell me which foot to use.
On my old machine I would use my zipper foot to get close to the cord
but I don't seem to get on very well with the Bernina zipper foot. Is
there another, better foot to use? I shall be using quite thick cord as
the piping is to be a feature, and I would rather not to have to invest
in another foot if the zipper one will do.
TIA for any advice anyone can give.
Sue
----------------------------------------------------------------------
Subject: Re: Speaking of G Street
Date: Tue, 9 Sep 1997 13:48:38 -0400
Hello Julie,
I live about 30 minutes from Mary Jo's and yes it is worth it. I try to
get there every chance I get. It is very overwhelming so plan to stay
several hours. If you can't find it at Mary Jo's it's not to be found! Be
prepared - Mary Jo's is not a fancy place. The real Mary Jo believes in
very little overhead so the different areas are labeled with handwritten
signs and I believe I heard that she's never bought a paperclip! Any way
it is the best fabric store in NC. Also, a Bernina store is right across
the mall. And a nice antique store too. Enjoy your visit! And go Heels!
Ellen
----------------------------------------------------------------------
Date: Tue, 09 Sep 1997 07:49:59 -1000
Subject: Quillow Directions
Quillow directions are still available at http://www.quilt.com/MiscQuilting/QuillowDirections.html. Just don't use too fat batting or it won't stuff into
the pillow!
----------------------------------------------------------------------
Date: Tue, 9 Sep 1997 11:28:01 -0400 (EDT)
Subject: Ott Lights
While its true that you can find an Ott light at Office Depot for around 40,
the difference between the black model and the grey model goes further than
price.
I called Ott Light today to get the skinny straight from teh horses mouth.
The grey ott light, which costs more, comes with a true color bulb. It
simulates natural light.
The black ott light comes with a bulb that is 7% to less like natural light
and it was designed for computer use. The bulb also looks different than the
bulb that comes in the grey model. I have both models, and I can notice a
big difference between the light that is put out.
In otherwords, while both models are great lamps, they grey one is better and
you get what you pay for.
You can show wherever you want, at least now you can be completely informed.
If you want to verify the information, you can call Ott Light at
800-842-8848.
----------------------------------------------------------------------
Subject: Re: Needed: Plans for Quilting Frame
Date: Tue, 9 Sep 1997 10:26:48 -0700
I know one of the hoop companies has plans. Go to Pinetree Quiltworks page at
http://www.quiltworks.com/
You can email them and ask if they have any available. Also I believe
Mountain
Mist carries plans. They have a webpage also but I don't have it in my memory
bank. You can do a search for that.
Carol
----------------------------------------------------------------------
Subject: Book
Date: Tue, 9 Sep 1997 12:25:20 -0700
There has been a lot of mention of a book called "Fine Sewing Machine". I
notice the last writer said it is available thru Softwear Productions and I
have that catalogue. I would very much like to know what the book is
about. Thank you. joycer
----------------------------------------------------------------------
Date: Tue, 9 Sep 1997 14:34:43 -0400
Subject: Crafter's Choice
> Teresa, When I subscribed to this "club" they didn't do anything right,
>wrong books came from order, no books when ordered, etc. I had a number
>from the original order, since I'm skeptical of book clubs.
>
>I called and called and the line was always busy, even in the middle of the
>night. Letters were never answered either. Finally, I sent a registered
>letter to them and it was finally resolved.
Now that you mention it....
I'm a Crafter's Choice member(?). When I joined, I bought a lot of books
and took advantage of the "3 free when you join" offer. I also made a
purchase right after I joined. I think I made 2 more purchases in
succession, then I skipped amonth. Now I've received nothing from them for
a while now. I'm trying to remember the last time I received anything from
them - and I can't remember. Maybe we should post the number to the list?
Rachel
----------------------------------------------------------------------
Date: Tue, 9 Sep 1997 14:10:08 -0400 (EDT)
Subject: Rust on bottom of sewing machine
I bought a Bernina 1260 QPE four months ago, and the bottom of the machine is
rusting. I had never looked at the bottom of my machine but caught a glance
of the rust the other day. My dealer said he had never seen anything like
this before. He is going to call Bernina and ask them. He also told me that
the bottom is galvanized steel, which I thought was rust-proof. My sewing
machine is kept on a desk which is against a wall, not a window. It is the
same room my computer is so I don't believe there are any moisture problems
in this room. I live in Maryland which has some humidity, but not an
excessive amount.
I was wondering if anyone else has experienced a similar problem. Also, does
anyone know if this is covered by the warranty? Should I be worried that the
inside of the machine may have been damaged? What could have caused this? I
hope this has not happened to any one else, but I hope someone can help me on
this one. Thanks, Regina
----------------------------------------------------------------------
Date: Tue, 09 Sep 1997 19:31:40 -0400
Subject: Mary Jo's (was: Speaking of G Street)
Bernina wrote:
> Now I have a strange question for my BFC friends who have visited both
G
> Street and Mary Jo's in North Carolina. I have a daughter who attends
> UNC-Chapel Hill. As you might have guessed I live very close to G Street
and
> vist there quite regularly. Mary Jo' s as I understand it is about 2-3 hrs.
> from Chapel Hill. It's my daughter's last year there so I was wondering if I
> should try to make the trip to Mary Jo's during one of my visits this year.
> Would it be worth the trip? I have heard that Mary Jo's is great but
would
> it have much more or much different than G Street to justify at least 5
> hours of driving. Your opinions would be greatly appreciated.
> TIA and have great week!
> Julie
Dear Julie:
I just got back from a trip to Mary Jo's, located in Gastonia, NC. I
live in Anderson, SC so it's about a two hour drive for me. Mary Jo's
is about the size of your average Wal-Mart. The selection is
unbelievable -- from elaborate bridal fabric to cottons for quilting.
They sell QUALITY fabrics. There home deco (drapery, etc.) is also
GREAT. The purpose of last weeks trip was to buy material for a bed
skirt, shams, seat cushion and curtains for my daughter's room along
with fabric to make a quilt.
I went to G Street this summer while visiting Washington, DC and did
make several purchases while my husband bought a magazine to read. I
think the prices at Mary Jo's are better than G Street.
YES, I encourage you to make the trip to Mary Jo's -- it will be
well worth it.
Regards,
Debbie
----------------------------------------------------------------------
Date: Tue, 9 Sep 1997 20:45:54 -0400 (EDT)
Subject: Quilt Stores - Chicago Area
Can anyone tell me the name or names of nice quilt stores in the Chicago
area.
I want to send my daughter there so she can pick out material for me to make
something for her. She lives near Wrigley Field. Does not necessarily need
to be right near there, but not 2 hours away. Thanks.
----------------------------------------------------------------------
Date: Tue, 09 Sep 1997 21:17:45 -0700
Subject: Mary Lou Nall
I am so excited! I am going to get to take a class from Mary Lou Nall
next Saturday. It's a class on using the eyelet maker. The class
cost $35.00 and she supplies the kit to make a linen placemat and
napkin.
Kay
----------------------------------------------------------------------
Date: Tue, 09 Sep 1997 21:14:53 -0700
Subject: Re: Ott Lights
>
> While its true that you can find an Ott light at Office Depot for around 40,
the difference between the black model and the grey model goes further than
price.
>
> I called Ott Light today to get the skinny straight from teh horses mouth.
The grey ott light, which costs more, comes with a true color bulb. It
simulates natural light.
>
> The black ott light comes with a bulb that is 7% to less like natural light
and it was designed for computer use. The bulb also looks different than the
bulb that comes in the grey model. I have both models, and I can notice a big
difference between the light that is put out.
>
> In otherwords, while both models are great lamps, they grey one is better
and
you get what you pay for.
>
> You can show wherever you want, at least now you can be completely informed.
> If you want to verify the information, you can call Ott Light at
> 800-842-8848.
>
So the bulb is different. I have seen the bulb advertised in Martha
Pullen's catalog for $15.00 and you could just get the correct bulb
and put it in your less expensive fixture. I don't think it costs
more to produce one in the factory than it does the other. They just
know that they can get the bucks from the quilters and stick a higher
price tag on it. I can't see where it would be worth twice as much.
JMHO.
Kay
----------------------------------------------------------------------
Date: Tue, 09 Sep 1997 21:10:00 -0700
Subject: Re: Quilt and Fabric Stores in Tennessee
> Hello Fellow Bernie Owners:
> I will be traveling to Nashville, Knoxville and Gatlinburg the first of
> October. Are there any really neat quilt or fabric stores or Bernie Dealers
> in this area. I'll be in the area for a week and would love to check them
I am originally from Nashville and I can tell you that there are some
really good stores in the Nashville area. Just 20 miles south of
Nashville in historic Franklin is Stitchers Garden. I always make
a trip to Stitchers Garden when I visit relatives which is twice a
year. Stitchers Garden claims that they have 5,000 bolts of fabric.
They have every pattern you can imagine. Be prepared to spend some
time there and take plenty of money with you because you are bound to
find something that you like. If you are into heirloom sewing there
is Childrens Corner and Dancing Needles. Dancing Needles is a Bernina
dealer. I think that there used to be a Bernina Dealer next door to
Children's Corner but not sure if it is still there. There is also
Smock and Sew. I know that there is a dealer in Knoxville because I
have seen her ad in Sew Beautiful. And Gatlinburg is just full of
wonderful craft shops. Have fun while you are in Tennesee and enjoy
what I call God's country.
Kay
----------------------------------------------------------------------
Subject: Re: Flower Stitcher
Date: Wed, 10 Sep 1997 07:02:14 -0400 (EDT)
Phyllis and BFC
I tried the thumb tack approach last night and it worked GREAT!.
I didn't have to put the point of my finger on the tack - ouch.
I just had to pull alittle on the quilt on the right side while
turning the fabric just slightly and that held it in place.
I'm currently machine quilting a birthday quilt for my mother
and I was putting embordered flowers in a 3" circle in the center of
each woven star 12" block. The first one I did I had to draw the line and do
one flower at a time and lift the presser foot to move it to the line.
I'm just starting machine quilting and I'm not too good at free hand yet!
This was a very slow process so I was thinking about getting the
circle foot but knew it would take forever to get since I have
the new 150 machine.
This method worked great. I'll be done with this quilt in no time.
Maybe even on time for her birthday :-)
Thanks Phyllis for explaining the method and whomever mentioned it before.
I just joined this group a month or so ago and have learned so much already.
Thanks everyone!!!
charlotte
p.s. someone mentioned a source for bernina stuff on-line that was
mentioned awhile ago. I must have missed that.
Could you please repeat the address - thanks.
----------------------------------------------------------------------
Date: Tue, 9 Sep 1997 06:47:20 -0400
Subject: re:t-fal iron
hi all,
Kate was asking about sources for a t-fal iron. What would the advantage
of a t-fal iron be over a not t-fal?
tia,
rivka
hi mom!
----------------------------------------------------------------------
Date: Tue, 9 Sep 1997 13:43:19 -0400 (EDT)
Subject: Quillow Poem
This poem by Marie Warda was printed in our Sewing Guild newsletter
March/April 1995:
The Quillow
I don't quite know the name of this,
but I call it a Quillow.
That is because it's mother was a quilt,
and it's father was a pillow.
The talents it's received from
each are really very neat.
It's soft and fluffy for your head, and
helps you warm your feet.
The pillow need not be explained
just lay your head and sleep.
The quilt part is just a little more,
it is really very deep.
Just pull the inside out of it,
and open it real wide.
The pocket that you find in there is for
your feet to hide.
When you wake up in the morning,
hold the quilt beneath your chin
Then fold the ends up toward the
middle and tuck the bottom in.
I think of you so often,
I pray to G-d above,
that you will long remember
you are wrapped up in my love.
Hope all you quillow makers enjoy this.
Rachel
----------------------------------------------------------------------
Subject: Re: Quilt and Fabric Stores in Tennessee
Date: Tue, 09 Sep 97 22:51:04 PDT
Mary,
I can tell you that there is a great quilt store in Jonesborough, Tennessee, which is the oldest city in Tenn. The name of the store is Tennessee Quilts and the owner has lots of beautiful fabric. Then in my town
which is 10 minutes from Jonesborough, (Johnson City) we have a
nice Bernina shop which just opened in a new location and the store
is beautiful and has lots of nice fabric. Then in sort of western North
Carolina, there is Mary Jo's located in Gastonia, near Charlotte. I
don't know of any fabric shops in Gatlinburg but I am certain that there
is some, but the country itself is beautiful. I would recommend a trip
to this area any time. Judy
----------------------------------------------------------------------
Date: Wed, 10 Sep 1997 01:06:35 -0400 (EDT)
Subject: Various
karen,
i am a bernina dealer. all of the machine models you inquired about are now
out of the line. you can probably find one as a resale (used) but no dealer
will have one. the 1090 qe was a super machine with a knee lever nice stitch
package but no letttering capability. it does do a repeating buttonhole
(counts stitches you assign to the left and right side respectivly.
the 1260 has a slightly better buttonhole system that actually measures each
side of the beading and can write in two lettering styles. each has the mock
hand quilting stitch
the 1260 has more stitches, a larger 50 character memory that can be retained
and recalled after being turned off. the 1090 has 5 character none
retainable memory. 1260 is probably the best and easiest computer machine
ever built by any company.
wait til it goes on sale in your area if you must buy it at off-prise. it is
well worth the retail cost anyway. her instructions are easy to follow. i
am doing a seminar at asg show soon and teaching to filled classes in nov. i
saw her samples at a show this summer and they are magnificant.
>>Laura
Theyare a wonderful machine. They look different than machines from prior
years byt they run like a champ. I have many customers who have purchased
them. They rave about them every time they come into the store. Guide class
is this week end and I can give more info from owners!! Don't be afraid of
it.
Subject: Need 160 help
I am a dealer. We saw one machine come in with a similar sounding problem.
It took me about 10 minutes to replace the "L" board at Bernina's cost.
Take it back to your dealer. This one is a no brainer.
----------------------------------------------------------------------
Date: Tue, 09 Sep 1997 14:58:19 -0700
Subject: Pfaff, Husqvarna Software Designs
Hiya!
I'd like to hear from anyone who has converted Pfaff, etc. designs for use in
the Bernina Designer 2.0 software. Thanks a bunch!
Kathleen in Seattle where retirement is great!
----------------------------------------------------------------------
Date: Tue, 9 Sep 1997 06:47:39 -0400
Subject: re:Ott for over the machine
Hi all,
Jerry Sue writes:
I was very interested in the post the other day where someone described
how they had purchased a work light and used the ott bulbs.>>
Ott-lite sells just bulbs. I think (but am not sure) that they will fit in
some types of standard sockets. Check it out with them.
www.ott-lite.com or 1-800-842-8848
rivka
hi mom
----------------------------------------------------------------------
Date: Wed, 10 Sep 1997 08:10:05 +0200
Subject: BDesigner
Good morning all
I am considering buying the Stitch Designer Software for my wife but
have some reservations and would be gratefull for any advice from the
experts out there.
1. What practical uses are there and is it easy to use ?
2. Is the documentation comprehensive and are all the correct cables
supplied ?
3. What pricing can I expect ? (Thngs are VERY different here in the
third world !)
4. Is the newer Revision 2.00 much better than the old one ?
TIA and all comments welcome.
Tony
----------------------------------------------------------------------
Date: Wed, 10 Sep 1997 06:39:20 -0400 (EDT)
Subject: Ruffles?
Hello everyone. I have a question that I'm hoping someone can answer. Can
anyone tell me the best way to make ruffles? For pillows, curtains,etc.. I
have my terrific 1090s and I also have a serger. I would really appreciate
all the help I can get. Thanks alot. Linda on Long Island
----------------------------------------------------------------------
Date: Tue, 09 Sep 1997 14:03:11 -0800
Subject: new computer quilting book
Has anyone bought/reviewed the new book by Judy Heim & Gloria Hansen, "The
Quilter's Computer Bible : Learn How to Use Your Computer to Design Fabulous
Quilts, Surf the Internet for Quilting Advice and Other Amazing Things."? It
is soft cover with a CD Rom for $39.95. I found it at Amazon Books under
http://www.amazon.com/exec/obidos/ISBN=1886411158/7912-9553178-960792.
Thanks,
Laura
----------------------------------------------------------------------
Date: Wed, 10 Sep 1997 07:23:01 -0700
Subject: Re: What foot for piping?
B
>
> Hello. My name is Sue and I'm the very proud owner of a 1260QPE (my
> first and last Bernina). I'm still finding out about my machine and
> although I've had my free lesson which came with it, I would appreciate
> advice on the following: I've just painted and decorated our bedroom
> and now want to sew new curtains and headboard cover which I want to
> pipe. I can't find anything in the manual to tell me which foot to use.
> On my old machine I would use my zipper foot to get close to the cord
> but I don't seem to get on very well with the Bernina zipper foot. Is
> there another, better foot to use? I shall be using quite thick cord as
> the piping is to be a feature, and I would rather not to have to invest
> in another foot if the zipper one will do.
>
>
The number 12 foot will do piping. Actually the #12 comes in two
sizes. The #12 foot that was designed for the 1630 has a bigger
channel than the #12 foot that fits the 1230. The #12 that was
designed for the 1630 is what you will probably need. If you want
to do baby piping, using the thinest cord, then the #23 clear
applique foot will do the job.
Kay
or the #19 foot
----------------------------------------------------------------------
Date: Tue, 9 Sep 1997 18:10:05 -0500
Subject: Quilt frame directions
Just got my newest Threads magazine and there is a whole page on making
an old fashioned quilt frame.
Hope it is what you are looking for. Looks pretty easy to make.
Peggy
----------------------------------------------------------------------
Date: Wed, 10 Sep 1997 02:10:05 -0400 (EDT)
Subject: Re: Hair Comb Scrunchies
Hi Glennie:
I purchased a "Scrunchies" booklet at one of the fabric stores some time ago.
Can't remember if it was Beverly's, Hancock or House of Fabrics. You might
check SoftwWear Productions (800) 297-9670 . They are on the web at
www.softwearproductions.com. You might also check Nancy's Notions or
Clotilde. If I can be of further help, please e-mail me privately.
Good luck, Joyce
----------------------------------------------------------------------
Date: Wed, 10 Sep 1997 09:38:59 -0400 (EDT)
Subject: Re: Mary Jo's (was: Speaking of G Street)
In a message dated 97-09-10 02:36:00 EDT, you write:
>> Is it worth the time driving to Charlotte from Chapel Hill? >>
You bet it is!!! Unbelievable selection of everything at Mary Jo's. I
especially enjoy their theme fabric. As a music teacher, I am always pleased
with the "music fabric". An unusually large, wonderful collection. I have
also found batiks and mottled fabric that I needed for a project that the
local quilt stores no longer have in stock. While in the Charlotte area
(Mary Jo's is actually in Gastonia, but very near the city), take a little
extra time to visit the quilt shops in Charlotte. One of my favorites is the
Quilter's Gallery. Not a terrible large store, but great "things". They
have so many samples throughout the store that you need to plan extra time
just to wonder thru and look at all the beautiful work. It's a small place,
but the ladies are very kind and helpful. By the way, it's not a bad drive
from Chapel Hill. Good Luck. Carla
----------------------------------------------------------------------
Date: Wed, 10 Sep 1997 15:15:15 +0200
Subject: BDesign - upgrade
Hi again Experts
Sorry to bug you but while going through archives I see lots of mention
of sending your 1630's to "the home" for upgrades !? What was that all
about ? My wife, Jan, got her 1630 ex Europe in late 1995. Will it be
OK ?
TIA
Tony
----------------------------------------------------------------------
Date: Wed, 10 Sep 1997 06:29:57 -0500
Subject: Sue re: piping
Try the roller foot. It really works well on the jumbo cording. The
zipper foot doesn't quite get it with that chunky cording.
Peggy
----------------------------------------------------------------------
Subject: Mary Jo's in North Carolina
Date: Wed, 10 Sep 1997 11:27:00 -0500
RE: the question about Mary Jo's in North Carolina
Where in North Carolina is Mary Jo's? I was at UNC-Chapel Hill for grad
school, and discovered that NC is full of wonderful surprises. The town
she is located in might be near some wonderful historic areas, natural
areas, the beach, etc. So you could combine a trip to Mary Jo's with
another "fun" thing. I found North Carolina to be a very unique
place--worth exploring in general...
Sally
----------------------------------------------------------------------
Subject: Re: what foot for piping?
Date: Wed, 10 Sep 1997 09:53:37 -0700
>Sue
Sue, here in the US we are sad too about Princess Diana. It's a terrible
tragedy.
There is a pamphlet called "Special Accessories" showing pictures and telling
about each foot for the Berninas. Ask your dealer if they can get that. I
find it very helpful. There is #38 piping foot for fine piping, #10 "edge
stitch foot" is useful for some, #12 bulky overlock foot works for heavier
piping. There is another #14 zipper foot with a guide that you might like
better than the #4 foot.
Carol
----------------------------------------------------------------------
Subject: Re: tying a quilt with single pattern
Date: Wed, 10 Sep 1997 09:32:57 -0700
>I am trying to tie a baby quilt using the heart pattern on my 1530 ....I get
the
>heart, but also about 3 tiny horizontal stitches on each end of the heart. It
>looks a little funny. Does anyone have any suggestions on how to get just the
>heart itself?
Maggi - if you don't care for the lines - usually I find they disappear into
the fluff - do this - don't use the securing feature and when done with one
heart pick out two stitches from the back and give the third one a yank and
pull the front threads to the back and tie then run through the other threads
with a needle. Some other patterns that work well are G1/3 with half pattern;
G1/6; F1/8; any on Objects, Animals and Vehicles, and try I 2/1 (Floral) looks
like a sunburst - do one, with needle down pivot and do it again (this looks
good using the Extension. Try most of them with the extension. Work on
scraps first.. I have even used the double alphabet with extension using BABY
letters separately spreading them around. Good luck.
Carol
----------------------------------------------------------------------
Date: 10 Sep 1997 17:08:54 -0400
Subject: Tension Troubles
Dear BFCer's,
I have been following this discussion list for almost a year now,
mostly lurking. I bought a 950 Industrial last November and have been
having tension problems, and got some advice from those of you on the
list. When I bought the machine, which was used, I was given Schmetz
needles with the machine. A few weeks ago, my dealer told me that she
had some Bernina needles for the 950, which work better for that
particular machine. She had forgotten about having them. I bought them,
and have finally solved my problem. I'm wondering if Bernina needles
work better for some of the other models. Tension problems seem to be
a continuing thread.
Linda
----------------------------------------------------------------------
Date: Wed, 10 Sep 1997 14:55:30 -0400 (EDT)
Subject: speaking of G Street
I'm planning my first trip to G St. late Oct/early Nov on my way to FL.
Since I know I'll be spending several hours there, would probably make sence
to just spend the night and be on my way early next day.
Are there any budget motels in the vacinity? I don't want to get lost.
Thanks. Sue
----------------------------------------------------------------------
Date: Wed, 10 Sep 1997 15:51:48 CST
Subject: Re: Quilt Store - Chicago Area
In the Naperville area is Linda' Silver Need on 5th Avenue and Stitches
and Stuffings in the
Cress Creek Square on Ogden and Royal St. George.
These are about a 30 to 45 minute drive out I-88 from Chicago. (depending
on what hour of
the day).
Sally
----------------------------------------------------------------------
Date: Wed, 10 Sep 1997 15:49:16 -0500 (CDT)
Subject: Re: Source for Tenting
Try Frostline Kits on the internet. Email me for their www address if
you cannot find them. They have all kinds of canvas, ripstop, mesh, etc.
Pat
----------------------------------------------------------------------
Date: Wed, 10 Sep 1997 15:48:34 -0400 (EDT)
Subject: Re: Speaking of G Street
I have been to both G Street stores and to Mary Jo's. I really prefer G
Street although Mary Jo's might have just a little bit more quilting cotton -
and that is a maybe. I don't believe Mary Jo's can even come close to G
Street for silks and woolens Of course this is only my opinion, hope it
helps.
----------------------------------------------------------------------
Date: Wed, 10 Sep 1997 13:27:08 -0700
Subject: Re: Need 160 Help
Your post caught my eye as my 150 did the same thing a couple of weeks
ago. At first I thought it was a power problem since it was the middle
of a heat wave but nothing else in the house was acting up. I finally
gave up and walked away for a couple of hours and then tried again. No
problem since then. Anyone else run into this? Do I need to take it in
for check-up? I've had it only a couple of months.
Carmen
----------------------------------------------------------------------
Date: Wed, 10 Sep 1997 18:52:48 -0400 (EDT)
Subject: Re: Book
Joyce,
Fine Machine Sewing by Carol Ahles is about using your sewing machine for
fine finishing which traditionally was done by hand. Decorative edges,
corded,scalloped, pintucks, hemstitching, lace inserts, narrow hemming,
these are the kinds of things she discusses. It's a good book for someone
who has basic sewing skills but hasn't tried some of the fancier techniques.
I have found it helpful.
----------------------------------------------------------------------
Date: Wed, 10 Sep 1997 17:15:19 -0500
Subject: sergers, what's new?
I am ready to update my serger from my Bernette 234D. I thought I read
here awhile back that there would be a new TOL Bernina serger this
winter. What is the early scoop anyone is hearing? If there is a new
one lurking on the horizon, I'd get the 2000DCE now and trade up with
the new one. Otherwise, I have heard the Elna has a good one and I'd at
least hunt for a dealer to see one. I'd rather stick to 'nina. Tried
to wander from the best once and I don't want to again. The thing is my
schedule has finally calmed down and I am happily back to sewing, just
in time to complete 2 outfits to wear to the rehearsal and wedding of a
cousin, plus my pre-teen is begging for new fall dresses. A new serger
would be so nice. :-)
Anxious to read your comments.
Joyce -- ...but still skipped the nice weather and went
sewing in the basement this afternoon. ???
----------------------------------------------------------------------
Subject: Serger
Date: Thu, 11 Sep 1997 00:01:55 -0700
My dealer seems to believe that Bernina is going to come out with a new
Serger. I have the Elna 614DE and I am sure it is a good basic machine,
but I haven't enjoyed it. I would like the tension automatically adjusted,
I have to play too much till I get it right.
Elna also had poor customer service. I don't know about the other
companies. JoyceR
----------------------------------------------------------------------
Date: Wed, 10 Sep 1997 14:00:58 +0100
Subject: Ott Light
Could someone send the phone # or address for the Martha Pullen Catalog?
I would be very interested in the Ott Light at that price.
When I first subscribed I was OVERWHELMED, I was tempted to unsubscibe
the same day I received over 30 new messages. Well, I am still here, and
learned a lot since then too. I still feel overwhelmed at times, but now
I know what to expect.
Any suggestions on what stitch to use on a very
loose weave (like a waffle-weave, is what it used to be
called), fabric for a "boxey" jacket? I do not own a serger, and I don't
think that the fabric will necesarily ravel. I am determined to finish
this, I am still a beginner when it comes to clothing construction. Any
hints out there in B-land?
Lin
----------------------------------------------------------------------
Date: Thu, 11 Sep 1997 00:49:40 -0400 (EDT)
Subject: Re: Sewserg, Quillows
Hi Colleen,
Welcome to the line and am happy that your DH taught you how to use the
computer. Must agree with you that this is a fun club and has a lot of
knowledge that is shared. To answer the quillow question- McCalls has a
quillow pattern . Basically what it is is a sort of lap quilt that has a
pocket the size of a pillow sew on to it and when you are finished using the
lap quilt you fold it up and put it into the pocket, hence a quillow. Hope
this helps.
Josephine
----------------------------------------------------------------------
Date: Thu, 11 Sep 1997 07:06:21 -0400 (EDT)
Subject: Zipper Foot
In a message dated 97-09-10 21:58:36 EDT, you write:
>> On my old machine I would use my zipper foot to get close to the cord
but I don't seem to get on very well with the Bernina zipper foot. >>
You can probably use your old zipper foot with the Bernina adaptor.
Martha Ann
----------------------------------------------------------------------
Date: Thu, 11 Sep 1997 07:11:16 -0400 (EDT)
Subject: Mary Jo's
About Mary Jo's - I live about 1 1/2 hours away and only seem to get there
once a year or so but it is well worth the trip! As an example - when I was
re-doing living room - local shop priced fabric at $49.00/yd if I bought
whole bolt. Price at Mary Jo's for same fabric was $15.96 - I bought whole
bolt there!
Martha Ann
----------------------------------------------------------------------
Date: Wed, 10 Sep 1997 19:01:37 -0400 (EDT)
Subject: Re: Quilt and Fabric Stores in Tennessee
Mary,
In the Gatlinburg area be sure to visit Holloway's Country Home (about 10
miles east of town). They have a bed piled with 30-40 quilts which they will
peel back for you to look at one by one. I bought some fabric there to make
a quilt and the owner helped me with my fabric selection, even sending one of
her workers out in the rain to another building for the perfect purple.
Their fabric selection is small but nice. Enjoy your trip.
Sue
----------------------------------------------------------------------
Date: Wed, 10 Sep 1997 17:44:48 -0400 (EDT)
Subject: 1530 SE
Bernina is offering this discontinued model for 1999.00 plus 1 year free
financing. Please give me all your thoughts pro and con re: the 1530 SE. I
need to make a decision fast! TIA..Karen
----------------------------------------------------------------------
Date: Wed, 10 Sep 1997 19:48:29 -0500
Subject: Re: Needed: Plans for Quilting Frame
Bernina wrote:
>
> Does anyone have the plans for a quilting frame that my husband could make
> for me? I would love to have one (especially one that is easy to put up and
> take down.)
> Love to hear from anyone willing to share.
The current issue of Threads magazine has plans for a quilting frame.
Pat
----------------------------------------------------------------------
Date: Thu, 11 Sep 1997 07:53:18 -0400 (EDT)
Subject: Models of Machines
Karen,
As the model numbers go up, so do the number of extras or features on the
machines and the prices. IMHO I would take the 1260QPE, it's the last model
made before the change over to the new design and more proven than the new
series. I think you should always buy a more advanced machine than you think
you'll use, just as we do w/computers. After all, they really are computers
in a way. This machine will last you a long time.
Sheri
----------------------------------------------------------------------
Date: Thu, 11 Sep 1997 00:35:06 -0400 (EDT)
Subject: Re: Tying Quilt with Single Pattern
For machine tying a low loft quilt try the following:
If you have a 1630
Presser Foot #18
Stitch:C11
Width: 4-1/2
Length: is preset
If you have 830, 930, 1030, or 1230/1260QPE, etc.
Presser Foot #18 or # 0
Width: 4-1/2
Length: Satin Stitch/Button Hole
This stitch is used to sew on buttons but is very effective and quick for
machine tying a low loft quilt!!
----------------------------------------------------------------------
Date: Thu, 11 Sep 1997 08:49:40 -0400
Subject: Re: Wanted: 930
The National Sewing Center in Fort Meyers Florida has two 930's for
sale. The had three but I bought one.
Glenn
----------------------------------------------------------------------
Subject: Re: Mary Jo's in North Carolina
Date: Thu, 11 Sep 1997 09:11:48 -0400
To Sally - Mary Jo's is located in Gastonia right off I-85. You can see it
from the highway. From Chapel Hill travel west thru Charlotte ( where
there is many interesting sites ) on 85 until you reach the Cox Rd. exit.
Exit off and take a left over the overpass and voila there you are. It's
in Gaston Mall on the back side. There is also a Bernina store in the
mall. If you are interested in traveling further west then the
Hendersonville-Asheville area is wonderful. Georgia Bonesteel's Bernina
store is in Hendersonville (Bonesteel's Hardware) . Hendersonville is
beautiful. I recommend downtown. Lots of good restaurants and shops. Flat
Rock has Carl Sandburg's home which is on tour. Very interesting place and
picturesque. Asheville's main attraction is the wonderful Biltmore House
and grounds. Pretty fantastic with good restaurant. Waechter's Silk Shop
(pronounced Wok-ters) (hope I spelled it correctly)
is a bernina store in Asheville and has gorgeous fabrics and an
outstanding button selection. Lots of interesting places in NC. Hope this
helps!
EPW
----------------------------------------------------------------------
Subject: Re: Sergers, What's New?
Date: Thu, 11 Sep 97 08:05:26 -0500
>I am ready to update my serger from my Bernette 234D. I thought I read
>here awhile back that there would be a new TOL Bernina serger this
>winter. What is the early scoop anyone is hearing? If there is a new
>one lurking on the horizon, I'd get the 2000DCE now and trade up with
>the new one. Otherwise, I have heard the Elna has a good one and I'd at
>least hunt for a dealer to see one. I'd rather stick to 'nina. Tried
>to wander from the best once and I don't want to again. The thing is my
>schedule has finally calmed down and I am happily back to sewing, just
>in time to complete 2 outfits to wear to the rehearsal and wedding of a
>cousin, plus my pre-teen is begging for new fall dresses. A new serger
>would be so nice. :-)
Joyce,
I am also waiting to see what the new Bernina sergers are like. I have
looked at both the Bernina 2000DCE and the Elna 925DX. Of the two, the
Elna is by far the more versatile and easier to use. However, before I
make a large investment, I decided to wait and see what the new Bernina
is like. If it matches the Elna (like I hope), I'll get it because I am
concerned about the direction that Elna as company is moving. (Their
sewing machines are all now made by a second party.) Linda
----------------------------------------------------------------------
Date: Thu, 11 Sep 1997 08:56:17 -0500
Subject: Palm Springs fabric shops
Dear Bernina buddies--
My firned and fellow quilting fanatic, Virginia, is leaving tomorrow for a
week long meeting in Palm Springs.
If you know of any good quilting shops, please let her know ASAP.
TIA,
Kim
----------------------------------------------------------------------
Date: Thu, 11 Sep 1997 06:44:54 -0700
Subject: Scrunchies
This is for Glennie, I think you were asking for Hair Scrunchies. I
have a leaflet called "Bunchies" Fast and Easy Instructions for Creating
a Bunch of Scrunchies. Its by Nancy J. Smith and Lynda S. Milligan.
The company is called
Possibilities
8970 E. Hampden Ave.
Denver, Col. 90231
303-740-6206
FAX 303-220-7424
They have all sorts--also I have a crochet leaflet if your interesting.
If you have a problem finding it. I will be happy to copy and mail it
to you. Hope this helps.
Kitty
----------------------------------------------------------------------
Date: Thu, 11 Sep 1997 09:02:30 -0400
Subject: Re: piping
Sue,
Have you tried moving the needle position while using the zipper foot?
Actually, to get the neatest stitch, I stitch the piping not quite as snug
as it can get and then baste it to the fabric. Then when I stitch the seam
that encloses the piping, I make _that_ seam as snug as possible. I think
this would be even more the case if you are planning to use large piping
cord. I bought the universal zipper foot because it has an adjustable shank
that lets you move it horizontally, but I think you can get the same effect
just by moving the needle a bit more to the edge of the Bernina zipper foot
that you have.
Robin
----------------------------------------------------------------------
Date: Thu, 11 Sep 1997 08:46:49 -0400 (EDT)
Subject: Re: Berserk Bernette Proglide
Rebecca:
I had the exact same thing happen to my ProGlide, except it hadn't
been dropped. I took it to G St. Fabrics and they sent it back to Bernina
for repairs. It came back within 10 days and cost me a total of $8.00. I
have no idea what they did to it, but it once again works perfectly! I think
yours probably needs a visit to the Bernina doctor, too.
BLM
----------------------------------------------------------------------
Date: Thu, 11 Sep 1997 10:44:15 -0700
Subject: Re: Mary Lou Nall
Hi, everyone ...
Kay DeFreese wrote about taking a class from Mary Lou Nall using the eyelet
maker. Is that yet another $$$ item we can buy for the 1630? What is the cost?
Mary Lou Nall is
coming to Puget Sound with Jean Picot. Has anyone taken classes from her? I am
interested in the polarfleece vest class particularly. Thanks.
...Kathleen where retirement is great!
----------------------------------------------------------------------
Date: Thu, 11 Sep 1997 10:58:31 -0400
Subject: Re: Sergers, What's New?
Joyce,
I just recently purchased a serger and looked around quite a bit before
hand. I decided on an Elna. I didn't get top of the line, but down one.
It was what the dealer recommended. This dealer carries them all, some
I had never even heard of and he said that Elna was the best for serger.
(Berninas aren't made by Bernina.) This model, the 704 was his personal
favorite and the one that he sews on all the time. Was this a salesman
talking? Who knows? BTW, he was rather young, around 30 and told me
that he had been sewing since he was 7. I am very pleased with some of
the features which it has over some other sergers. It is worth looking
at.
Mary Ann
----------------------------------------------------------------------
Date: Thu, 11 Sep 1997 11:01:58 -0400 (EDT)
Subject: Re: What foot for piping?
Sue,
Are you basting the cord-covering fabric first? Sometimes that alone
will make the cording manageable. It doesn't need to be as close to the
cord as the final stitching, just something to get that fabric applied
evenly.
I use the #12 foot, which Bernina calls a tricot foot, for piping, but
it won't accommodate extremely fat upholstery-type cords. For larger piping,
you might try using your regular zipper foot plus your seam (quilting) guide
to create a sort of channel for the cord, holding it close to the foot and
keeping it from veering off. (That's the problem I've always had with the
zipper foot).
The guide has a clearance of about 3/8" above the plate, so if you are
using one of those huge cords, it might not work. Seam guides that attach to
the machine itself are available for some machines, but I don't know about
Bernina (or about Bernina-compatible generic ones). I would even consider
taping or rubber-banding a makeshift guide to the machine just long enough to
complete the cording.
Best of luck,
Roz
----------------------------------------------------------------------
Subject: RE: Mary Jo's
Date: Thu, 11 Sep 1997 15:04:17 -0500
Hi All!
Mary Jo's address:
401 Cox Road- Gaston Mall (in the back)
Gastonia, NC 28054
Hours: Mon & Thurs 9 - 8:45
Tues.-Wed-Fri-Sat. 9-5:45
(704) 861-9100
Hope this is helpful. Have fun shopping!
Emily
----------------------------------------------------------------------
Subject: Desperately Searching!!!
Date: Thu, 11 Sep 1997 14:37:35 -0600
Dear BFC members,
My mother and I are on a desperate search for a cross stitch pattern that
seems to be discontinued. From what I can tell the company has gone out of business and unless any of you can help, I'm afraid we're out of luck. The pattern is of a doll. The face is cross stitched to look like a china doll and the body is cut out and sewn together. I have been able to find several clothing patterns for her but am still missing the actual doll pattern and face chart The manufacturer was Cross Stitch & Country Crafts and I believe it first came out in 1985 or 1987. Any help in our search would be so greatly appreciated.
Please E-mail me privately . Thanks in advance.
Pam
----------------------------------------------------------------------
Subject: 1530/1530 SE
Date: Thu, 11 Sep 97 13:01:13 PDT
Hi Everyone;
What is the difference bewteen the 1530 and the 1530SE?
TIA, ;-)
Jean
----------------------------------------------------------------------
Date: Thu, 11 Sep 1997 15:42:48 -0500
Subject: Re: Serger
Here I am again with my standard refrain--
Those of you who are newer to the list haven't read this before--
BERNINA DOES NOT MAKE SERGERS.
Nor do Elna or Pfaff or Singer.
There are only a few companies in the orient that make sergers. The various
sewing machine companies have their sergers made by these factories to
their own specifications.
So even though we all know that Bernina makes the world's best sewing
machines, it's not necessarily true for sergers.
Take a look at the top of the line Elna--I hear it's a whiz and has a 25
year warranty.
If I didn't already have the Bernette 008D and 009DCC, the Elna is what I
would look at.
Kim
----------------------------------------------------------------------
Date: Thu, 11 Sep 1997 19:44:05 -0400 (EDT)
Subject: Thread bunching up doing Satin Stitch
Becky, you wrote about the thread bunching up when you were trying to satin
stitch applique. One question - did you a stablizer under the fabric? You
should always use a stablizer under the fabric when using the satin stitch.
Also sometimes you have to length you stitch length a little or it will
tunnel. Hope this helps.
HappyStitching,
Shirley
----------------------------------------------------------------------
Date: Thu, 11 Sep 1997 19:18:02 -0400
Subject: Re: Ott Light
Hi all,
It has been posted:
>
> While its true that you can find an Ott light at Office Depot for around
40,
the difference between the black model and the grey model goes further than
price.
>
> I called Ott Light today to get the skinny straight from teh horses
mouth.
The grey ott light, which costs more, comes with a true color bulb. It
simulates natural light.
>
> The black ott light comes with a bulb that is 7% to less like natural
light
and it was designed for computer use. The bulb also looks different than
the
bulb that comes in the grey model. I have both models, and I can notice a
big
difference between the light that is put out.
>
> In otherwords, while both models are great lamps, they grey one is better
and
you get what you pay for.
>
> You can show wherever you want, at least now you can be completely
informed.
> If you want to verify the information, you can call Ott Light at
> 800-842-8848.
>
Well, I did call Ott-light to clear up my confusion. I can confirm
everything that was stated above. Also I was told that the sewing/craft
light is built sturdier than the office light in order to handle the abuse
that these types of lamps tend to get. The office light is designed to
reduce glare around computers, etc. and the sewing light is designed to
simulate the natural sunlight spectrum.
I too am convinced that the company is playing it straight with us. And I,
for one, choose to believe them.
jmho,
rivka
hi mom!
----------------------------------------------------------------------
Subject: RE: Quilt Store - Chicago Area
Date: Thu, 11 Sep 1997 11:20:55 -0500
Check out Vogue Fabrics in Evanston (North of Chicago)
Also Cotton Pickers Fabrics in Morton Grove (West of Evanston)
further out is A Touch of Amish in Barrington (25 miles NW of Chicago)
Nancy
----------------------------------------------------------------------
Date: Thu, 11 Sep 1997 20:11:49 -0500
Subject: Re: Sergers, What's New?
I was told there are two or three companies that makes ALL the sergers -
just to different specs for different companies. Martha in the Ozarks
probably has a better answer for this. Brenda
----------------------------------------------------------------------
Date: Thu, 11 Sep 1997 20:17:42 -0400 (EDT)
Subject: Re: Serger
Hi Joyce,
G Street has the new sergers in. They look super especially the new
2500DCE. It had all the automatic tensions , a wider cutting width, and three
different cover stitch widths. I believe that changing from serger to cover
stitch is alot easier too. I also thought the new 1100D looked good .
Julio
----------------------------------------------------------------------
Date: Fri, 12 Sep 1997 07:28:09 -0400 (EDT)
Subject: Re: What foot for piping?
The best piping foot I have use is the bulky overlock it has a gruve on the
under side so you can sew the piping inside your fabric and then use it to
attach the pipiing to your pillow or where ever. It is worth investing.
Hope this helps Kay
----------------------------------------------------------------------
Date: Fri, 12 Sep 1997 06:49:38 -0400 (EDT)
Subject: Re: Hourglass Patterns
I retail the hourglass patterns and they are great so is the fit for over
fortish. If you can not find them I would be glad to send information
Kay
----------------------------------------------------------------------
Date: Fri, 12 Sep 1997 04:07:49 -0400 (EDT)
Subject: #12 Foot
In a message dated 97-09-11 05:41:40 EDT, you write:
>> On my old machine I would use my zipper foot to get close to the cord
but I don't seem to get on very well with the Bernina zipper foot. Is
there another, better foot to use? >>
Yes, there is a better foot. It's foot #12, called the tricot foot. It has
a lump in the middle that the piping fits into. You can put your needle as
close or as far away as you like. Sorry to have to tell you to buy another
foot, but I truly use this foot often. It is also great for adding sequins
or pearls or braids to fabric.
Debbie
----------------------------------------------------------------------
Date: Thu, 11 Sep 1997 16:31:48 -0500
Subject: Martha Pullen's #
Bernina wrote:
>
> Could someone send the phone # or address for the Martha Pullen Catalog?
>
Martha Pullen web site: http://www.marthapullenco.com
You can get to several different sites of hers from this site.
Brenda
----------------------------------------------------------------------
Date: Fri, 12 Sep 1997 07:55:38 +0100
Subject: Thumb Tack
>>I tried the thumb tack approach last night and it worked GREAT!.
I didn't have to put the point of my finger on the tack - ouch.
I just had to pull alittle on the quilt on the right side while
turning the fabric just slightly and that held it in place.
Use a cork.
Robbi Eklow
----------------------------------------------------------------------
Date: Fri, 12 Sep 1997 08:51:03 -0400 (EDT)
Subject: Re: 1530 SE
i purchased the 1530 during the summer unfortunately it was a little more
expensive than that, but i love it just the same. I had gone through two
other cheaper machines and had a lot of problems with the timing and decided
enough is enough. my husband and i looked at all the different brands and
decided on the 1530 and i couldn't be happier. go for it.
----------------------------------------------------------------------
Subject: New edition of Judy Heim's book
Date: Fri, 12 Sep 1997 07:17:54 -0500
I am going to quote Rob Holland who addressed the subject of Judy Heim's
new book on another list as follows:
- -------------------
I have received a pre-publication copy of the book for review. It's
not in your local shops yet, because publication is scheduled for October,
and Judy and Gloria are working on final revisions.
If you like Needlecrafter's Computer Companion, you will also like this
book. It has a wealth of information about all aspects of computer
quilting.
For software-specific information, it focuses on EQ, Quilt-Pro, Corel,
and a couple of Macintosh programs (don't have the reference with me). If
you have some other program than these, like QuiltSOFT or PCQuilt, it
won't be as helpful.
The book also has a lot of info on things like scanners, printers, drawing
tablets, etc., and for beginners, good advice on what kind of computer you
need to meaningfully "computerize" your quilting. It has stuff on using
computers to transfer images to fabric, on scanning "fabric" into your
machine for use in quilt design, etc.
Beyond these things, the book is in many places hilariously funny, as in
the section in which the authors report on the results of visits to three
computer stores where they ask the question: What kind of computer do I
need
to do computer quilt design? That one had me rolling on the floor.
The book also has a section of Internet Yellow Pages for quilters, in which
a great many sites are reviewed and rated.
I hope to carry this book in the Planet Patchwork General Store when it's
available, at a discount off retail, and am working on a full-fledged
review of it for the next issue of Planet Patchwork's newsletter, "The
Virtual Quilt." Y'all are just getting a sneak preview.
Rob
- ----------------
For those of you who do not know Rob, he is editor of The Virtual Quilt,
and for more information on Planet Patchwork and The Virtual Quilt, go to
his web page at:
http://planetpatchwork.com
There is lots of great stuff on his site.
Mary McManus
----------------------------------------------------------------------
Date: Fri, 12 Sep 1997 09:39:09 -0400
Subject: full spectrum lightning
Hello!
Have just returned to the Net a short while ago. I inquired about full
spectrum lightning, and they want to know what colors I want.
Apparently the tubes range from white to orange colors, depending on
what you want. I want to use it in my quilting "workshop" Can anyone
shed any "light" (no pun intended) on this subject. Thanks a million.
Bunny
PS We do have a Home depot, but it is 80 miles away.
----------------------------------------------------------------------
Date: Fri, 12 Sep 1997 14:32:19 +0100
Subject: Re: What foot for piping?
Hi - to everyone on this list a Huge Thank You for your advice and help
to this poor old Bernina newbie. I am compiling a list of all the feet
everyone mentioned and have decided to spend the weekend with piles of
piping cord and all my available feet (and a few old ones) and
experimenting until I get the look I want. I do always baste absolutely
everything (had a really frightening sewing teacher who insisted and who
I'm convinced I shall meet on a street corner one day when I'm wearing
something I've made Without Tacking First) including piping, as if
anyone can make it slip and slide around, I can!!
I knew you'd be able to help and you've really come up trumps. Thank
you again.
Have a great weekend
Sue
----------------------------------------------------------------------
Date: Fri, 12 Sep 1997 08:01:19 -0400
Subject: Re: sergers, what's new? Reply
>I am ready to update my serger from my Bernette 234D. I thought I read
here awhile back that there would be a new TOL Bernina serger this winter.
What is the early scoop anyone is hearing? If there is a new one lurking
on the horizon, I'd get the 2000DCE now and trade up with the new one.
Otherwise, I have heard the Elna has a good one and I'd at least hunt for a
dealer to see one. I'd rather stick to 'nina. Tried to wander from the
best once and I don't want to again. The thing is my schedule has finally
calmed down and I am happily back to sewing, just in time to complete 2
outfits to wear to the rehearsal and wedding of a cousin, plus my pre-teen
is begging for new fall dresses. A new serger would be so nice. :-) >
Joyce,
Yes indeed there is a new TOL serger lurking! It will be model 2500 and
it is very similar to the 2000DCE as I recall. (Saw it at BU but that was
several months ago!) Outside, it is styled very much like the 2000DCE but
the major differences is that the 2500 will have two widths of cover stitch
instead of one and the steps that are needed to convert between cover and
regular overlock will be greatly reduced. You will love the ease of
threading and the automatic tension adjustments - go for it! The 2000
series have been great machines.
Mary Alice
----------------------------------------------------------------------
Date: Fri, 12 Sep 1997 09:07:42 -0400
Subject: ruffles
Linda,
I had a 1090S before I upgraded to a 1530. The easiest way I know to make
ruffles is to use the gathering stitch with the #3 buttonhole foot (the
short one, not the long black one) and come narrow string or cord (dental
floss would be fine). I don't remember the number of the gathering stitch
but it's called that in the manual--it makes one forward stitch, zigs to
the left, forward, zags to the right, forward, etc.
You cut your string twice as long as the fabric you want to ruffle, fold it
in half and loop it over the little prong in the back of the #3 foot, just
as if you were making a corded buttonhole. The the gathering stitch goes
between the two sides of the string loop and catches it with every other
stitch (make sure it is wide enough that you don't actually stitch into the
string). Then you just pull the two ends of the string to gather up the
fabric.
Robin
----------------------------------------------------------------------
Subject: RE: Sergers, What's New?
Date: Thu, 11 Sep 1997 20:39:24 -0700
>>>(Bernina aren't made by Bernina.) >>>>
Mary Ann,
To tell you this is rather deceptive, since all Sergers are made in
the Orient, Bernina has to have them made there also, but they
are made to Bernina strict guidelines. So except for the machines
that originated in the orient, none of the others are made by their
manufacturer either.
Glennie
----------------------------------------------------------------------
Subject: RE: Scrunchies
Date: Thu, 11 Sep 1997 20:30:29 -0700
>>>This is for Glennie, I think you were asking for Hair Scrunchies. I
have a leaflet called "Bunchies" Fast and Easy Instructions for Creating
a Bunch of Scrunchies. Its by Nancy J. Smith and Lynda S. Milligan.>>>>
Kitty>
I have that book, it has great scrunchies in it, but the one I needed was
made quite a bit different. Anyway I managed to find one, and can now
make myself as many as I want. It uses two tubes and is attached to two
hair combs, and can be worn several different ways. Also got the Bunzy,
and figured out how to make them, they have a wire in them and wrap
around your hair, forming hair buns etc. Thanks for the help though. I
appreciate it.
Glennie
----------------------------------------------------------------------
Date: Thu, 11 Sep 1997 22:15:57 -0400 (EDT)
Subject: Re: Waffle Weave Fabric
How about Seams Great?
Rachel
----------------------------------------------------------------------
Date: Thu, 11 Sep 1997 21:45:20 -0400 (EDT)
Subject: Re: Sergers, What's New?
I have nina sewing machines but an elna 925 derger and LOVE it! Check it
out..you won't be sorry! Karen
----------------------------------------------------------------------
Date: Thu, 11 Sep 1997 23:17:41 -0400 (EDT)
Subject: Re: piping foot
While it is my nature to lurk, I will delurk here and tel you my experience
with making piping. I do mostly heirloom clothing but have done some silk
ribbon pillows. On heirloom things you generally want a very small piping and
I use the number 30 foot which is a pintuck foot. It fits perfectly over the
small piping. In teaching a class on a silk ribbon pillow I constructed all
of the students pillows at the end on the class as the focus of the class was
silk ribbon and not constructing.
The piping we used was about 1/2 " and we used the cording foot #12. The
cording we were using in the piping was larger than the foot but the foot
rides the top of the piping and gets very close where, im my experience the
zipper foot does not get close enough. I hope this helps.
Martha
----------------------------------------------------------------------
Subject: RE: Sergers, What's New
Date: Thu, 11 Sep 1997 17:03:06 -0700
I heard that the TOL of Bernina Sergers will be computerized.
So it might be worth the wait to see, if you decide against the
newer ones, there will probably be plenty of good used ones
available that people have traded in for the new ones, at a
reasonable price.
Glennie
----------------------------------------------------------------------
Date: Thu, 11 Sep 1997 23:51:08 -0400 (EDT)
Subject: Re: Sergers, What's New?
If you are anywhere near Libertyville, there is a Bernina-Viking-plus-other-
brands dealer there. Sometimes it is helpful to get input from a dealer with
a great variety of products to offer. I find I'm more sold on the Bernina
machines than the sergers. I also have a 234D which is a frequent
frustration to me, particularly with threading. I had a later model with a 5
thread option and gave it to my sister in law 'lest I throw it through the
window in frustration with the threading. I understand other brands and even
'Nina's newer models are less difficult to thread.
Betty
----------------------------------------------------------------------
Date: Fri, 12 Sep 1997 08:04:40 +0100
Subject: Quilt Shop near Chicago
Cotton Pickers in Morton Grove is probably the nearest and quickest
quilt shop from Chicago proper. Probably a ten minute drive. I went
there all the time when I lived in the city.
Take 94 North to Dempster, then West on Dempster about half a mile.
Their address is 5926 Dempster Street
Morton Grove, IL 60053phone is 847-966-1882. The hours are Mon-Sat
10-5, Sun 12-4. They have about 3000 bolts. It's a great store.
Robbi
----------------------------------------------------------------------
Date: Thu, 11 Sep 1997 20:01:15 -0400 (EDT)
Subject: Re: Mary Jo's
I would definitely make a trip to Mary Jo's. It is well worth one trip and
if you like it you may be like the rest of us and plan to go every once in a
while because the distance is so great. Next time we go we plan to go one
day and come back the next and share room expenses. Too much to take in in a
few hours and you come away wishing you had gone back and gotten that piece
you debated over.
Go for it. We took a one day trip by bus with our quilt guild. Only there
for three hours.
HappyStitching
Shirley
----------------------------------------------------------------------
Date: Thu, 11 Sep 1997 19:18:00 -0400
Subject: re:Quilt Store - Chicago Area
Hi all,
you write: >>
Can anyone tell me the name or names of nice quilt stores in the Chicago
area.
I want to send my daughter there so she can pick out material for me to
make
something for her. She lives near Wrigley Field. Does not necessarily
need
to be right near there, but not 2 hours away. Thanks.>>
Try Cotton Pickers' on Dempster. It is 1.5 miles west of the Dempster exit
of the Edens (I-94) expressway. The ladies there are really nice and they
have a good selection. The only drawback is their hours : m-f 10am-5pm,
Sat ??, Sun, 12-4.
Also there is Vogue Fabrics in Evanston. It is not a quilt shop but they
have a very large selection of fabrics. Alot of "quilt" cottons. They are
on Main Street /718 Main Street (about 3 blocks east of Ridge Ave. in the
Main St. Shopping area. Their hours are better.
Both stores have very helpful and knowledgeable staff. I frequent both
places (my checkbook can attest to it - gg).
rivka
hi mom!
----------------------------------------------------------------------
Date: Thu, 11 Sep 1997 20:01:15 -0400 (EDT)
Subject: Re: Mary Jo's
I would definitely make a trip to Mary Jo's. It is well worth one trip and
if you like it you may be like the rest of us and plan to go every once in a
while because the distance is so great. Next time we go we plan to go one
day and come back the next and share room expenses. Too much to take in in a
few hours and you come away wishing you had gone back and gotten that piece
you debated over.
Go for it. We took a one day trip by bus with our quilt guild. Only there
for three hours.
HappyStitching
Shirley
----------------------------------------------------------------------
Date: Fri, 12 Sep 1997 07:28:48 -0700
Subject: Re: Mary Lou Nall
> Kay DeFreese wrote about taking a class from Mary Lou Nall using the eyelet
maker. Is that yet another $$$ item we can buy for the 1630? What is the cost?
Mary Lou Nall is coming to Puget Sound with Jean Picot. Has anyone taken
classes from her? I am interested in the polarfleece vest class particularly.
Thanks.
> ...Kathleen in Seattle where retirement is great!
The eyelet maker is one of the costly attachments for your machine and
yes there is a model available for the 1630. I was fortunate to find
one at a Pfaff dealer for half price because someone had decided they
want a TOL Pfaff and traded in their 1130. The eyelet maker had never
been used so I felt like I got a good deal. I paid $41.00 for mine but
I think they are approximately $100 now.
Kay
----------------------------------------------------------------------
Subject: 1260 Memory
Date: Fri, 12 Sep 1997 11:31:00 -0700
HELP!
Can someone tell me the steps to clearing stitches that are in my 1260's
memory. (it's the regular 1260, not the new quilting version). I love
my machine, but I'm not sure whether there is something wrong with the
memory or I misunderstood when I was given the instructions last year.
I don't use the memory often enough (mostly for quilt labels) to
remember the exact sequence of steps.
When I put a letter ( usually a name) in the memory, I can't seem to
clear it to put something else in, usually a date. Both the old name
and the date then appears when I hit memory recall.
I think I'm just doing something wrong, so don't want to lug my machine
to the dealer (1 hr away) unless it's really broken.
Thanks in advance,
Jamie
----------------------------------------------------------------------
Date: Fri, 12 Sep 1997 10:37:56 -0500
Subject: Re: Sergers, What's New?
Hi! I just bought one of the new 1100DA models. I'll explain after the
top-o-line one. I think most dealers haven't brought out the new ones
until they sell as many of the other ones they can with the 12 mos. no
payments plans. According to my Bernina dealer, the 2500DCE will be
coming to *her store towards the end of this month and should be around
the price of the 2000DCE. Compared to the 2000DCE, the 2500DCE has:
* 5mm Cover stitch (3 needle)
* 2.5mm Cover stitch (2 needle)
* Chain stitch (2 thread)
* Unlike the 2000DCE in conversion to cover stitch, there is
no stitch plate change
no presser foot change
no screwdriver needed
* New features include:
thread cutter
8mm cutting edge
swing out presser foot
no presser foot change
The 1100DA is a Bernina (not Bernette) and is made in Japan, not Taiwan.
It is a 4,3,2 serger with diff
* lay in threading
* tension release when presser foot is raised
* swing out presser foot
* auto needle threader for 2 needles (I really like this one)
* color coded looper threading
* elasticator and blind stitch foot
I just bought one (mine was $829). I really love having an excellent
quality, basic serger with everything I need. I was afraid to buy a
Bernette, the Berninas at the time were too expensive and decided to
wait for a mid line Bernina. It doesn't have the cover stitch, but I
didn't think I'd be sewing bathing suits or leotards. I love it already.
Christi
----------------------------------------------------------------------
Date: Fri, 12 Sep 1997 10:20:21 -0600
Subject: Ott light
Hi
I've been following the postings re ott lights. Does anyone know of a
Canadian retailer that sells them? Bulbs or/and fixtures.
Thanks! :-)
Bonnie
----------------------------------------------------------------------
Date: Fri, 12 Sep 1997 12:19:55 -0400 (EDT)
Subject: Re: Mary Jo's in North Carolina
Mary Jo's is in Gastonia, NC Near Charlotte, NC There are lots of historical
places in this area. If you get to Mary Jo's plan to spen all day and visit
the Bernina store across from MJ.
Kay
----------------------------------------------------------------------
Date: Fri, 12 Sep 1997 11:52:53 -0400 (EDT)
Subject: Book Covers
Well once again I have dug myself in a hole and said I would do
something and now cant find the directions...Could you please help?
I need to make 3 book covers (you know the kind made of fabric and put over
trashy novels) by tomorrow and I am stumped.
I can't remember how to get them to adjust so they will fit fat books or
thin ones..One of the fabric stores gave free directions but i can not find
mine.
Please help
I know someone out there has made these, they were all the rage awhile back
Peggy
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
World Wide Quilting Page * Bernina Page