Bernina Fan Club Archives
November 1997
Sunday, November 23 - Saturday, Noverber 29
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Sun, 23 Nov 1997 10:08:27 -0500 (EST)
Subject: Artista 180
Well went to my Bernina Dealer on Friday and test drove the 180. I have the
1630 and took the plunge and upgraded. The stitch quality on the Artista is
good and the large embroidery field is a plus. The buttonhole feature is
alot easier than the 1630 and the machine is very user friendly.
I cannot decide whether to keep my Deco and software. I have alot invested
in the Deco and do not always want to sew large designs so that way my
machine does not become a very expensive embroidery machine.
I was soo00000 excited that I have not slept for 2 nights wanting to get my
hands on my new toy.
Thanks for listening.
Natalie
----------------------------------------------------------------------
Date: Sun, 23 Nov 1997 08:28:41 +0100
Subject: Re: Basting Spray
Hello Kathleen,
The basting spray I have found is available from Sullivan's which is an
Austraila based notion company and Sprayway brand which is available from
most of my notion houses. I have both brands if you have trouble finding
it where you are. I would be happy to mail order for you from Just
Stitchin', 2002 S. Stewart Street, Springfield, Mo 65804.
Your quilt sounds wonderful!!!
Martha
----------------------------------------------------------------------
Date: Sun, 23 Nov 1997 08:23:52 +0100
Subject: Re: 004D or 2000DE Serger
Hello Edie,
The 2000DE serger features the 3 thread and 4 thread overlock stitch, two
thread overlock stitch and roll hem and flatlock. The machine will also do
a mock flatlock with either the right or left needle depending on the width
flatlock you prefer. The roll hem feature is built in for both 2 and 3
thread. There is a dial to set the machine for the various types of
stitches and it controls all of the tensions for you. This model also
offers knife cutting width control so you can choose the seam allowance
width according to your fabric weight and desired finished look. The tape
sewing device is built in on the standard presser foot. Other presser foot
options are: Elasticator, Gathering, Cording, and Blindhem. There is even
a seam guide with this model so you can adjust exactly where the raw edge
of your fabric will go as you serge. I obviously love this model!
Martha
----------------------------------------------------------------------
Subject: Re: 004D or 2000DE Serger
Date: Sun, 23 Nov 1997 11:18:01 -0500
I have an OO4D and I love it. I don't do anything decorative with it. I
use it for seams, hems, rolled hems etc. I've had it four yrs. and never
had a minutes worth of trouble with it. And I use it much. Went to a
serger class with all kinds in it and the teacher (from Palmer Plestch
- -sp?) said I had "a good little serger there". It is certainly "way down"
from the top of the line but I wouldn't trade for anything. Hope this
helps.
Ellen
----------------------------------------------------------------------
Date: Sun, 23 Nov 1997 11:02:46 -0500 (EST)
Subject: Re: 004D or 2000DE Serger
In a message dated 97-11-23 09:00:50 EST, you write:
>> I am deciding between a user 004D and a used 2000DE. Obviously the 2000DE
will cost more. I am interested in hearing opinions from people with these
machines. I am quite experienced with sergers and had a Bernette 234 that I
traded up for an Elna 4 years ago that I hated. Now I'm trying to go back
to Bernina and wasn't gonna spend any money with a swap for the 004D but am
thinking of going for the 2000DE.
>>
I have a 2000DE and love it. You will find a great improvement on the
Bernette 234 you had (I had one of those at one time also). When the 2000DE
first came out I belonged to a serger club at my dealers. The people with
the 2000DEs always were the first to complete the projects so I feel it must
be easier to use.
Joan
----------------------------------------------------------------------
Date: Sun, 23 Nov 1997 09:58:27 -0600
Subject: Re: Basting Spray
Kathleen, The name of the spray is ATP 505, Temporary Adhesive, which I just
received from Nancy's Notions, and haven't used yet, but anticipate good
results from what I've heard. Teresa
----------------------------------------------------------------------
Date: Sun, 23 Nov 1997 11:31:21 -0500 (EST)
Subject: Re: Vogue Stores in Chicago
If you're going to shop at the Vogue stores in Chicago, go to the Evanston
store. I went to another Vogue store around Roosevelt and was rather
disappointed. The store was smaller; the fabric was not as nice; the staff
was surley. I won't be going back to that particular store. It takes about
30 minutes to drive from downtown Chicago to Evanston along the lake, but
you'll end up with much better fabric and a nicer shopping experience!
Micki
STILL waiting for my 180 to be delivered
----------------------------------------------------------------------
Date: Sun, 23 Nov 1997 13:46:42 -0500
Subject: re:Seersucker Material
Hi all,
Cusy posted:
>Pamela, I guess you are right, I called it pop corn material because that is
how we call it here in Panama, C.A> Do you iron while you sew this material?
Cusy >
My guess is not to iron it. Then you would just press down all the pouffiness
and it will look wrinkled. JMHO
Rivka
hi mom
----------------------------------------------------------------------
Date: Sun, 23 Nov 1997 13:46:21 -0500
Subject: Re: How to get better lighting
Hi all,
The Ott Light is also available, less expensively, from SoftWear Productions.
1-800-297-9670.
Rivka
hi mom
----------------------------------------------------------------------
Date: Sun, 23 Nov 1997 11:09:59 -0600
Subject: Re: 004D or 2000DE Serger
I have 2000DE and just love it - especially since it does a two-thread
rolled hem - I have learned heirloom sewing on the serger and the
two-tread rolled hem makes a lot less bulk. Also like the needle down
feature and ease of threading. However, I don't like the tension control
settings - I would prefer knobs with numbers rather than "tick" marks.
Hope this helps in your decision. My suggestion would be to sew on both
with the same fabrics and see which works best for you.
----------------------------------------------------------------------
Subject: Re: 180 $$
I just purchased the 180E for $3009.30. My dealer is having a 30% off sale
for the holidays.
----------------------------------------------------------------------
Subject: Re: Holiday Gift Ideas
Date: Sun, 23 Nov 1997 14:32:09 -0600
Carol I just received a packet of sample fabrics from Cindy
(Button 'N Bolts) in Iowa. Lots of neat fabrics to order from her and good
prices. $2.00 for the sample fabrics. She has a lot of baby knits, and
flannels. I haven't ordered from her yet, but plan to. Her e-mail is:
Cindy
Buttons 'N Bolts
----------------------------------------------------------------------
Date: Sun, 23 Nov 1997 14:40:02 -0400
Subject: 1630 Update
1630 owners who updated: did you receive any kind of documentation with
your updates? A brochure? Anything? I didn't.
Sylvia
----------------------------------------------------------------------
Date: Sun, 23 Nov 1997 14:37:49 -0400
Subject: Thanks! (re: Houston Bernina Dealers)
Thanks to everyone who replied to my query regarding Bernina dealers in
Houston! You've all been so kind - I feel so welcome, I can hardly wait
to move!
Sylvia
----------------------------------------------------------------------
Date: Sun, 23 Nov 1997 18:41:32 -0600
Subject: Re: Bernina Dealers
Bernina wrote:
> I deffenetly do not recommend the Bernina dealer at Richmond Ave. in
> Houston, Tx. I had a very bad experience with them. Cusy
> >From Panama city, Rep of Panama
Cusy,
Was that prior to the last year? The new owner's took over that site
approximately a year ago. Prior to that, the center had another name
and another owner.
The new owner's, John and Judy Curtis, are very customer oriented and
bend over backwards to help their customers. When a customer walks out
their door, they want them to be satisfied and they count on that
customer for repeat business and referrals.
No affiliation, just a very satisfied customer!
Pat
----------------------------------------------------------------------
Date: Sun, 23 Nov 1997 18:38:37 -0600
Subject: Quilters Glu-Tube
To Carol --
My apologies for not responding to your question sooner. Family stuff. Enough
said? You had asked about whether it's possible to quilt (by hand or machine)on something that I had used Quilters GluTube on...Yes, I've done both. Here's how I use it. I use freezer paper to cut out the applique (plastic side of the freezer paper ironed to wrong side of fabric). Then use the GluTube to turn the edges over and make them stay. You apply (sparingly)the glue to both the seam allowance of the fabric and the paper, wait a few seconds for it to dry to a tacky state, and then turn the seam allowance of the fabric back onto the paper, pressing with your fingers. It can be peeled back and repositioned, if necessary. After you are finished appliqueing, you go in from behind the block and cut out the backing and remove the freezer paper.
----------------------------------------------------------------------
Subject: Re: Bernina 840
Date: Sun, 23 Nov 1997 18:31:43 -0600
Hi all,
I'm hoping someone will know the answer to my question out there. I have a
chance to get an 840. Does anyone know what is different on this model from
an 830??
Thanks to anyone who can help with this.
ttyl,
Patti
----------------------------------------------------------------------
Date: Sun, 23 Nov 1997 13:08:20 -1000
Subject: Book Help
Help!
I saw a new book advertised a while back -- My First Quilt or something
of that nature. I would like to get it for my niece for Christmas - but
can't find it. Is it by Carole Doak? Does anyone have a clue about
what I am talking about? Any suggestions would be very much welcomed!
TIA
Beth
----------------------------------------------------------------------
Date: Mon, 24 Nov 1997 07:02:02 -0500 (EST)
Subject: Re: Renaissance shirt
Folkwear patterns
Box3798
San Rafael, CA 94902
I have not bought a pattern from them in a number of years but they had great
authentic patterns from different eras and countries. They go together
nicely and the package and additional information very interesting. Good
Luck!
----------------------------------------------------------------------
Date: Mon, 24 Nov 1997 04:41:35 +0000
Subject: Re: 1630 and Walking Foot
Tyral
I have same number as you have on box and different number on paper in box. Mine works fine.
----------------------------------------------------------------------
Subject: Comforter cover
Date: Sun, 23 Nov 1997 22:56:36 -0800
Hi: I want to make a twin bed comforter cover out of gingham sheets. The
new style, no zipper, a lap over with big buttons. I can guess it out, but
it would be a help if I knew how much the lap is and how many buttons
should be across etc. If anyone has simple instructions I would appreciate
hearing from you. jr
----------------------------------------------------------------------
Date: Sun, 23 Nov 1997 21:13:37 -0800
Subject: re: reviews
Rivka asked:
"No Time To Sew" and "Pattern Free Fashions".
Thanks Betsy. It is always interesting to know what other people think of
technical type books. Would you recommend buying them?
If it were a choice between the two, I'd go for Pattern-Free first. But I
bought both of the books, and really enjoy looking through them. Someday I
hope to have time to sew something, like a silk tuxedo shirt !
Betsy
----------------------------------------------------------------------
Date: Mon, 24 Nov 1997 10:05:23 -0500 (EST)
Subject: Re: Basting Spray
Can the basting spray be ironed over before being washed out, or would this
make it permanent? This spray sounds great.
Pam
----------------------------------------------------------------------
Date: Mon, 24 Nov 1997 09:18:30 -0500 (EST)
Subject: Yards of Silk
Thai Silk, in California, has lots of, well, Thai silk and many others as
well. Great range, good quality. They sell swatches, so you aren't buying
blind. If you buy in quantity (15-25 yards of one color), you can get a
wholesale price. They advertise in Threads, Surface, Fiberarts, etc. But be
careful -- silk is addictive!
----------------------------------------------------------------------
Date: Mon, 24 Nov 1997 09:10:20 -0500 (EST)
Subject: Re: Purchase advice - Bernina Machine (NYC)
Bryan,
A new Bernina dealer recently opened here in Manhattan: Manhattan Sewing
Machine Center, 219 East 85th Street (btwn 2nd & 3rd), tel. 734-7909. Call
for their hours, as I think they close on Saturdays. While this store is
new, it is owned by the same folks who have had a dealership in Brooklyn for
about 30 years.
I was in there the other day, and the fellow there is very friendly. They
also carry Viking and Elna machines, and from what I could tell, their prices
are pretty good (I think better than the previous Manhattan dealer). I'm
looking forward to doing business with these folks, and am glad to have a
dealer in the city again.
----------------------------------------------------------------------
Subject: Re: Cover Stitch Machine
Date: Sun, 23 Nov 1997 11:07:32 -0500
The 009DCC is now $499 according to ads in sewing publications. Try your
local dealer for this price.
----------------------------------------------------------------------
Date: Mon, 24 Nov 1997 07:39:07 -0500 (EST)
Subject: Re: Speaking of Parts...
Uou can order bobbins for your Bernina from Clotilde if you have a catalog.
Hope this helps
----------------------------------------------------------------------
Date: Mon, 24 Nov 1997 04:41:35 +0000
Subject: Re: Ultra Suede
The side without nape is wrong side of Ultra suede.
Tyral
----------------------------------------------------------------------
Date: Mon, 24 Nov 1997 11:03:51 -0700 (MST)
Some time ago I saw a mention about "jammers parking garage" at
Walmart. I got the impression that it was used for storing sewing machine
feet. Well, I was in Walmart and found storage units in the hardware
section. The brand name was Contico but "garage" was in big letters and they
were plastic drawers in many different sizes.
Can someone clear up my questions? I think the people talking about
these things were from the Florida area.
TIA from MK
----------------------------------------------------------------------
Date: Mon, 24 Nov 1997 11:03:48 -0700 (MST)
Subject: Re: Simple Quilt Pattern
DEar Donna,
I did a 9-patch with a class of 4th graders. I cut the 4inch squares
with my rotary. It was a scrap quilt with a color theme of muddy
blues,greens, and reds decoded on by the class. I had them experiment with
cutting 2inch squares and gluing onto construction paper. They chose their
squares arranged them on a sheet of paper and stacked them so they were
ready to stitch. Used a sewing machine that could run at a llower speed and
bklocked a pedal on on oldeer machine that couldn't have it's speed
regulated. This pattern is easy to maintain stitch quality. Chain stitching
helps.
Hope this is food for thought. MK
----------------------------------------------------------------------
Subject: Re: Plastic Bag Holder
Date: Mon, 24 Nov 1997 10:08:11 -0800
I do a very simple one:
Cut fabric 18" by 26" using a print, solid or decorator.
Cut 2 pieces ofnarrow elastic 9 " each
Cut fabric 1" by 6" for loop on bag
Embellish, quilt, iron on applique, paint, or whatever your creative ideas
drive you think of applying to the center outside surface of this bag.
Fold the piece for the loop the long way by folding in both raw edges, then
folding in half [eliminates sewing] and stitch down. Pin to right side of
26" fabric at 1' below top edge.
Stitch 26" fabric together the long way. Now you have a 26 inch tube.
Apply elastic to top edge and bottom edge. If you have a serger, use that
method.
Plastic bags stuff down into the top, and eventually, when full, can be
pulled out the bottom.
The more decorative, the better it looks in the kitchen.
These are also a wonderful way to store fabric scraps that are a litle to
small to store any other way. Make the bag smaller, and coordinate the
color with the scraps inside.
DeAnn
----------------------------------------------------------------------
Subject: RE: Speaking of Parts...
Date: Mon, 24 Nov 1997 11:12:53 -0500
Melody asked:
>I need to know what bobbin to purchase for my 930. It did not come with
>any. Can someone help? Can I purchase these bobbins at any good sewing
>supply store or does it need to be a Bernina Dealer? It is out of the way
>for me to go to a Bernina Dealer. Is there a way to order parts by mail?
Congratulations on your 930! I've had mine about 6 months now, and I'm
still totally in love with it. The bobbins that came with it are the same
as those you buy for all the other Berninas below the 1630. I had heard
someone hear say that Harriet Hargrave suggested the solid metal bobbins
for the 930 instead of the ones with the holes, but I haven't been able to
find those to fit. The regular Bernina bobbins work really well for me,
however, and it hasn't been a problem.
Now if I could just find a 1260QPE.... :-)
Michele
----------------------------------------------------------------------
Date: Mon, 24 Nov 1997 09:56:00 -0500
Subject: LaWayne in Springdale AR--old machines
I just got reconnected to BD and see you all are still stitching away.
Hi, to all of you.
This is in response to LaWayne who wrote about old machines--
I am a garage saler and frequently see old machines for sale. Just last
month there was an older Singer in a nice cabinet with many attachments
(ruffler being one) for $75. I have seen others for $25 in cabinets.
All of these being older Singers from the days when they were heavy and
Singer was the only machine many of us out here in the hinterlands had
ever heard of. Usually these are part of a household being broken up as
the result of some older person going into a retirement home or the
children selling off the household goods after a parent's death. They
will say something like this, "We think it will sew. Mama made all our
clothes on it. But you'll just have to take it as is." I almost bo't
that one last month just to get the ruffler and have an extra machine,
but thankfully I realized that I actually didn't need to take up anymore
space in that room.
Happy stitching to all--
Frances
----------------------------------------------------------------------
Date: Mon, 24 Nov 1997 10:05:39 -0500 (EST)
Subject: Re: Artista 180
In a message dated 97-11-23 06:19:55 EST, you write:
>> Both the 1260 and the 1630 are computer machines...both by the same company.
The main difference are the additional features that the 1630 has. I would
think that the basic stitch quality would be identical because the
technology is shared throughout all the computer machines.
_________________________ >>
Actually, I think that the mechanical parts of these two machines are not the
same. One has a rotary and one an oscillating hook, though frankly I don't
know which has which or what difference it makes. Also, one of the main
functional differences between these machines is that the 1630 makes a wider
stitch, which allows for bigger embroidery patterns.
Pam
(who remains satisfied with her lowly 1090s)
----------------------------------------------------------------------
Date: Mon, 24 Nov 1997 14:36:19 -0500 (EST)
Subject: Re: Ultra Suede
There is a right and wrong side and direction, so you at least need to be
consistent. It's much richer on the right side and in the right direction,
however.
Betty
----------------------------------------------------------------------
Date: Mon, 24 Nov 1997 14:26:05 -0500 (EST)
Subject: Re: Plastic Bag Holder
In a message dated 97-11-24 07:01:15 EST, you write:
>> Does anyone out there have some simple
instructions, I know it has elastic on one side and draw string the other,
but I don't know which side is which and how long and wide to make it. >>
My simple bag holder is about 15" to 18" long and about 8" wide--thus you
would cut a rectangle 18" x 16" to make the holder. I make the casings first
along the 16" side and put elastic in one casing, pulling it tight so that
you can just barely get four fingers in the hole. On the opposite end put
in the drawstring and leave it long for hanging. Sew up the 18" sides rst
and you are finished.
Debbie
----------------------------------------------------------------------
Date: Mon, 24 Nov 1997 12:15:58 -0600
Subject: Re: Rhinestone Zippers
At 05:46 PM 11/23/97 -0500, you wrote:
>On the chance of sounding really stupid, (where have I been) I have never
heard
>of rhinestone zippers. Where do you use them - on very fancy clothes I
>imagine?
>Where are the rhinestones?
I have made one black denim jacket with a rhinestone zipper. My 22 year old
daughter wears it with blue jeans. I'm working on another jacket again
black. This material is a wool blend with a fuzzy look. She wants a warm-up
suit with a rhinestone zipper, maybe after Christmas.
The rhinestones are on the teeth.
Faye
----------------------------------------------------------------------
Date: Mon, 24 Nov 1997 18:43:37 -0500
Subject: re:Need Source
Hi all,
Bobbie posts:
>I am wondering if anyone has a source for velour hand towels or any velour
plain towels info greatly appreciated e-mail me privately
Bobbie>
Does Cannon make velour towels? Someone on my embroidery list says that
they do mail order at reasonable prices. Here is the info:l Fieldcrest
Cannon 800-236-1912.
Hope this helps,
Rivka
----------------------------------------------------------------------
Date: Mon, 24 Nov 1997 18:43:45 -0500
Subject: re:Purchase advice - Bernina Machine
Hi all,
Bryan posts about a machine for his wife.
I can't help much with which version of machine (i.e. 1230, 1630, etc). I
have a 1230 and love it. Regarding new versus used: A used machine will
be fine. Most dealers will get the machine in tip-top shape for you and
give you the full 20 year warranty with a used machine. The machines are
pricey - so this kind of service should be expected. I have a 1230 that
was a classroom machine, a Deco 500 that was a demo machine, and until
recently a White serger that was also a classroom machine. No complaints
about any of them.
People I know who have Pfaff's are happy with them. I think quality-wise
the two brands are the same. The Bernie people love their Bernies and the
Pfaffies love their Pfaff's.
Hope this helps some.
Rivka
----------------------------------------------------------------------
Subject: Polar Fleece
Date: Mon, 24 Nov 1997 20:11:11 -0500
I am just catching up on my digests, and read a question re:polar fleece in
quilts. My children (8 and 9) made bed quilts this summer for themselves. My
son is allergic to dust mites and mold, and I didn't think that cotton batting
would hold up to hot washing every few weeks. We used polar fleece on the
backs. If you do this, be sure to use a large number of pins when basting, as
the fleece tended to stretch when it was being machine quilted. The quilts
are nice and snuggly and the kids love them. Hope this helps. If you have any
specific questions, e mail me privately.
JANE
----------------------------------------------------------------------
Subject: Re: 180
Date: Mon, 24 Nov 1997 14:42:56 -0800
My dealer has it in. Just sitting there it doesn't look like anything
different than the other new midlines. Can't wait to get my hands on it and
make it jump through hoops, but today I'm teaching and busy.
Carol
----------------------------------------------------------------------
Date: Mon, 24 Nov 1997 13:15:17 -0800 (PST)
Subject: fold-up ironing boards...
Greetings!!
Most of the time I lurk, and occasionally I have the odd request, but this
time I think I can contruibute. I have a fold up ironing board--I got it
at Fred Meyer for around $20. I'm really glad I have it, as I'm trying to
cram my bedroom and a sewing room into a 10 x 12 room. I'll be moving in
April, and will have my own sewing room, but until then I'm all crammed
in. One day my roommate peeked into my room and pronounced it "cozy"...
But I digress...I like this ironing board, and to second someone else's
caution, it's not as sturdy as a regular board, so be mindful of that when
your cat decides he's going to get your attention by jumping up there, or
when you have some intense pressing to do. It's also not as padded, but that
can easily be fixed...
Just a little food for thought...
Cheers!!
Helen
----------------------------------------------------------------------
Date: Mon, 24 Nov 1997 14:57:03 -0500 (EST)
Subject: Re: 1630 and Walking Foot
Hi, Marcia!,
I just got my walking foot out, checked the box and instruction booklet
against the numbers you gave. All match. Also the "Bernina" on either side
of the white casing around the foot. It is the correct foot. I've had mine
a year or a little more, and all checks out to the "letter." It is tricky to
attach, as you have to slide it at an angle under the machine bar, (with the
bar raised) and lift it onto the bar, lining up the hole and the end of the
bar. But it is a champion on once your use it. I love mine. I made the
slight modification in removing the center rubber piece that was below the
metal foot with a very sharp knife. The rubber is even with the bottom of the
foot. This was for quilting over heavy seams. It also nullifies the
warranty. I have had no problems with it since the modification and have
used it on heavy and light weight fabrics.
I don't think you will need to drive back to take your foot back. It's the
right one.
Happy Holidays!
VonnieK
----------------------------------------------------------------------
Date: Mon, 24 Nov 1997 13:48:36 -0500 (EST)
Subject: Re: Speaking of Parts...
In a message dated 97-11-24 03:07:37 EST, you write:
>> I need to know what bobbin to purchase for my 930. It did not come with
any. Can someone help? Can I purchase these bobbins at any good sewing
supply store or does it need to be a Bernina Dealer? >>
Bernina will tell you that you must use their bobbins. I have an 830 and
have successfully used several brands. That said, I would still buy at least
one package of Bernina bobbins so that I could match sizes of the generic
ones. Would your dealer mail you some if you called?
Debbie
----------------------------------------------------------------------
Date: Tue, 25 Nov 1997 01:28:38 -0500 (EST)
Subject: Re: 180 ??
I'm very interested in the 180. You shared your dealer was is having a 30%
off until 12/31/97. You paid $3009.30 and the Designer Sofrware package is
an additional $1200.00. Would you share who your dealer is?
Sincerely,
Debby
----------------------------------------------------------------------
Subject: Re: Speaking of Parts...
Date: Mon, 24 Nov 1997 21:35:19 -0800
Hi Melody You can use a standard bobbin in your 930, and they are sold in
the notion dept of sewing stores. The metal ones with holes all around the
flat sides for example. Have a great time with that machine.
DeAnn
----------------------------------------------------------------------
Date: Mon, 24 Nov 1997 18:43:43 -0500
Subject: re:Speaking of Parts...
Hi all,
It was posted:
>I need to know what bobbin to purchase for my 930. It did not come with any.
Can someone help? Can I purchase these bobbins at any good sewing supply
store
or does it need to be a Bernina Dealer? It is out of the way for me to go to
a
Bernina Dealer. Is there a way to order parts by mail?>
I just checked my SoftWear catalog (1 800 297 9670) carries Bernina
bobbins. They didn't specifically state bobbins for the 930 but it is
worth a (toll-free) call to find out.
hope this helps,
rivka
----------------------------------------------------------------------
Date: Mon, 24 Nov 1997 18:30:38 -0800
Subject: Re: 1630 and Walking Foot
Marcia, have you tried ordering your walking foot from www.sewserg.com?
I was able to order a 930 foot from them earlier this year so I would
think they would also carry feet for a newer machine like you have.
I have no affiliation with them, but was very glad they had the foot I
needed.
Hope this helps.
Diana
----------------------------------------------------------------------
Date: Mon, 24 Nov 1997 22:39:55 -0500 (EST)
Subject: Re: Plastic Bag Holder
My 13 year old resident granddaughter has started on her aunts/mom/other
grandma Christmas gifts -- and guess what she is making -- Plastic Bag
Holders. The design we've invented consists of an 18" x 25" rectangle. She
is embroidering on these with the Deco --
Design
PLASTIC
BAGS
Another Design
She thinks she's cruising in the fast lane because she's learned how to
thread the embroidery machine - and she gets to choose the designs and
colors.
After the embroidery is done, sew up the seam (she serged - and finished the
top and bottom raw edges with the serger). Turn under about 1 1/4" on top
and bottom edges forming a facing. Top stitch folded edge and stitch down
the facing. On th bottom edge this will form the casing for the elastic.
Leave an opening to insert elastic (we used 3/4") - Pull up the elastic
until it forms a space about 2 inches or so in diameter where you can pull
out the plastic bags. Cut two strips about 3" wide by 18". Fold in half,
right sides together and stitch. Turn. Press. Top stitch along each side,
1/4" from edge. This forms the hanging straps. Fasten one to each side of
the top on the inside forming loops which can be hung over a hanger or hook.
Load the bags from the top, stuffing it as full as possible - and when
needed, pull out from the bottom opening.
Hope this makes sense. Kelly is having a ball making these. If you don't
have an embroidery machine, why not make out of a pretty print - or stitch or
fuse an applique for decoration.
She thinks this is such fun she's going to make her uncles and Dad a litter
bag for the car -- not so big and with no opening at the bottom - but sew
some of those "male macho designs on these - like cars, trucks, wild
animals......
Lucy
----------------------------------------------------------------------
Date: Mon, 24 Nov 1997 22:13:32 -0500
Subject: Re: Simple Quilt Pattern
I would suggest a simple nine patch or even a four patch pattern for the
Girl Scouts. It is something they can actually accomplish without
frustration. I have worked with the Brownies and the Girl Scouts on
similar projects and their skills and interests in sewing are so varied,
it is best to pick out something that is easy to accomplish. I miss
working with the girls. I'm sure they will all have a good time!
Judy
----------------------------------------------------------------------
Date: Mon, 24 Nov 1997 22:39:08 -0800
Subject: Re: Holiday Gift Ideas
Bernina wrote:
> Does anybody know of a mailorder place where I can find cute baby
> prints of
> cotton knits for clothes? I am having a hard time finding any.
>
> Carol
Carol--They have some awfully cute fabric (including knits) at
"Dimples" their phone/fax number is 618 345-3997--address is 914
Southwind Ct., Collinsville, IL 62234. They'll send swatches, I think
for $2--refundable with first order. I like their "stuff". Bev.
----------------------------------------------------------------------
Date: Tue, 25 Nov 1997 07:03:31 -0700
Subject: Tucsn Area
Hi Edie
Yes The Bernina dealer on Speedway are very good and can steer you in
the right direction. And the gals in there are great.
I spent alot of time in there debating, 6 hours in one day sitting at
the 1260QPE and the 160 and a used 1530 at that time. And ended up with
the 1260QPE and love it. That was after a few years of even deciding
"Do I need a new machine?
My ol Kenmore of 30 plus years was still going great. ANyway another
store you might be interested in is called "The Quilt Basket" 6538 E
Tanque Verde 72-8810
There right across the street from our clinic. Anothr one is Precious
Hands 2917 E. Grant Rd. 325-8010 Have fun!
This is for I can't remember. I also own a 2000DE and love it. Theres
no messing with the tensions-all automatic and I've sewed on everything.
I got a grat deal on the 900DCC so didn't need the cover stitch on the
serger. Hope this helps.
Byefo now Kitty
----------------------------------------------------------------------
Date: Tue, 25 Nov 1997 00:20:31 -0500 (EST)
Subject: resizing of designs on the Deco 500
Hi everyone,
If you have the Deco 500 and the software you resize the designs on the
software, not the machine.
Sherrie
----------------------------------------------------------------------
Date: Tue, 25 Nov 1997 08:03:09 -0500
Subject: Re: Plastic Bag Holder
Joyce,
I have one that was made with a kitchen towel. Just sew down the long edge
and put elastic at one end and a hanging loop and a drawstring or elastic
at the other end. Hope this helps.
----------------------------------------------------------------------
Date: Tue, 25 Nov 1997 00:04:46 -0500
Subject: Re: Bias binder
Ann,
I recently got the bias binding attachment too. When I'm doing something
that has a long straight side, like placemats, I apply it this way.
Start in the middle of one of the long sides, leaving about 2-3 inches
unstitched at the beginning. Go all around and stop about 2-3 inches
from where you started. Carefully withdraw everything from the binder
and finger press the edges along the edge until they meet. Pin to mark
this spot then overlap them at a 90 degree angle and stitch just as if
you were sewing strips of bias binding together--which you are,
actually. Then press everything in place and stitch this part down,
using the edge stitch foot if you have it, matching up with the previous
stitching. Sometimes it takes a bit of practice, but then you have a
really neat bias edging. This is how I do my quilt bindings (except they
are bigger and I can't use my attachment for them!)
Robin
----------------------------------------------------------------------
Date: Tue, 25 Nov 1997 06:50:35 -0500 (EST)
Subject: Hour glass patterns
I want to thank those who inquired about the hourglass patterns, and those
who ordered. The designers, Joyce Carter and Jane Garrison, informed me they
have the jacket-vest pattern in size 20 to 28, all other patterns are 6 to
18, they are multi-sizes. For futher information SEND A SELF STAMPED ENVELOPE
to Kays Enterprise- 817 Southview Cir. Fayetteville, NC 28311 or e-mail
Kay
----------------------------------------------------------------------
Date: Tue, 25 Nov 1997 09:27:47 -0500 (EST)
Subject: 1260
In a message dated 97-11-25 06:20:39 EST, you write:
>> Both the 1260 and the 1630 are computer machines...both by the same company.
The main difference are the additional features that the 1630 has. I would
think that the basic stitch quality would be identical because the
technology is shared throughout all the computer machines.
>>
I've heard that the stitch quality is better on the 1260. The 1640 has a
wider zig-zag capability (9mm, I think?), and some stitch quality is
sacrified to get that larger width. The difference may be negligible,
though.
----------------------------------------------------------------------
Date: Mon, 24 Nov 1997 15:41:47 -0800
Subject: 930 Bobbins
Hi,
The attachment is a copy of the message the Bernina Tech sent me, when I
asked "Which bobbin for the 930?" Just in case the attachment gets
garbled, it's the same bobbin with the round side holdes that the 1080,
1090, 1260, etc. use. Don't get the ones with the oblong rectangular
openings, that's the 1630 bobbin.
Best,
Valerie
>I recently purchased a Bernina 930 (Record Electronic) machine, serial
>#22174790. The owner's manual pictured a bobbin with a rectangular slot in
>the end. The bobbins that came with the machine have nine round holes on
>each end. Will the newer Bernina bobbins with the crosshatched center and
>seven holes on each end be suitable for this machine? I would also like to
>know when it was manufactured. Thank you.
>
>
>
>>
>Yes it is ok to use the new type BERNINA bobbins.These holes help you see
how-
much thread is on the bobbin.Your BERNINA 930 was manufactured in 1982.
BEST REGARDS,
====================================================================
Bernina of America
techq@bernina.com
====================================================================
----------------------------------------------------------------------
Subject: Re: 1630 accessories & feet for sale
Date: Tue, 25 Nov 1997 10:16:35 -0500
I have a LARGE collection of feet, stitch plates, walking foot (with Harriet
Hargrave modification) and ruffler for sale. Please e-mail me privately for
the details if you are interested. This is a great time to get yourself some
stocking stuffers. I am trading in my 1630 for the Artista and need to make
room for the new feet.
Thanks.
Donna
----------------------------------------------------------------------
Date: Tue, 25 Nov 1997 06:36:33 -0500 (EST)
Subject: Store at Richmond in Houston, TX
Woah,, Cusy of Panama writes " I had a very bad experience with them". But
, I wonder when she bought her machine? I bought my 1630 there just befor
Margeret sold the sore to a simply marvelous couple of people that also own
the store in Humble, TX. I have had nothing but rave reviews for these
people. If I need support, I can either call or stop by and someone is always
redy to help. I got very extensive free training on my machine from them
even though when I purchased it they were not the ones to own the store. I
have to say I really enjoy the free sewing club and I take other classes
with them. I also purchased a Deco 500 from the new owners and received the
same great support. I would be interested in hearing exactly what problem
Cusy had?? I'm sure neither of these people want to have a
disatisfied customer. :) Thanks for letting me have my 2 cents here.
----------------------------------------------------------------------
Date: Tue, 25 Nov 1997 08:29:17 -0500 (EST)
Subject: Re: Purchase advice - Bernina Machine
You might contact The City Quilter, I think they are in the Chelsea area.
They are, I believe, a sub dealer for Sew Right Sewing Machines, an
excellent Bernina dealer in Queens. If you can go for the money, you may
want to look at the new Artista 180--very innovative, very high tech. If
they were still being made, or if you can find one available, the 1260 or
1530 are terrific machines. Retail on the 180 without the embroidery arm or
the optional software is around $4200, but you know, in New York, nothing
ever sells for retail.
Lots of luck in your search.
Ellen
----------------------------------------------------------------------
Date: Tue, 25 Nov 1997 07:43:46 -0500 (EST)
Subject: Re: Purchase advice - Bernina Machine
Bryan,
I am not an expert sewer like your wife, but if I were you, I would give her
a gift certificate to a Bernina store and let her go in and try them out.
It's kind of like getting the car that is right for you. My dear husband
gave me a sewing machine for my birthday and he tried to talk me into buying
a new Sears machine, but I held out for a used Bernina. I had to wait for 3
months for the machine to become available, but it was worth it to me. For
myself, I did not want all the computerized ones as I am doing good to keep
up with WordPerfect (smile), but I love my Bernina so much. From what I
understand the 930 model (the one I have) is the strongest and the last of
the mechanical ones they made. Your wife sounds like she would want the
later models, but she would need to pick it out. You men are so wonderful to
do these things for us and we appreciate it. Good luck and Happy
Thanksgiving.
Anna
----------------------------------------------------------------------
Subject: Re: Hoop
Date: Mon, 24 Nov 1997 23:02:10 -0800
I took a machine embroidery class and the teacher was selling 6-7'' wooden
hoops, using the part with the screw then lined one edge with Dr. Scholls
shoe padding (it self adhieves on one side and is a foam like pad) trim to
fit your hoop. I held it against the layered quilt piece as I sewed and it
worked wonderfully for holding and allowing for free movement in quilting
designs. If it doesn't fit easily under your foot you just unscrew and open
it to get around the foot, You don't really want the hoop much bigger
because it will hit the machine head more.--GOOD LUCK
----------------------------------------------------------------------
Date: Tue, 25 Nov 1997 10:44:20 -0500
Subject: Polartec--Embellishment Ideas
This is in response to a question about embellishments on Polartec.
Recently I "visited" with a precious little size 4 jacket in the
children's department at one of my favorite stores. (They just happen
to have beautiful fabric, too.) This little jacket was out of the
nubby-type fleece. It was red and had three items appliqued on it. I
couldn't find the nubby-type but have made a fair copy using red
fleece. On one side of the front at about the level a pocket would be
is a white felt snowman applied with black blanket stitch (by hand)
using all six strands of DMC embroidering thread. On the other side at
about the same level is a green felt tree applied with a bright yellow
(school bus yellow) running stitch. Above the tree is a white crescent
moon applied with a black running stitch. Wal-Mart had the exact little
star-shaped buttons in that school-bus yellow that I had seen on the
original. I put three up over the snowman, three on the tree and then
about 12-16 across the upper back (on the rounded facing area). Like
the original I faced it with a plaid flannel and rounded the back piece
of the facing and stitched it down. This provided backing for the
little star buttons. Also when I put the three buttons over the snowman
I put a small doubled square of the flannel on the inside behind them.
This turned out to be just as cute as the one in the store and I can
hardly wait to take it to our Bernina club's "Bring & Brag" session.
(This is a sorta folkwear look.) The one in the store just laid the
facing under it and serged it all around with a close, balanced stitch
using some sort of shiny thread (probably deco).
At my Bernina dealer's store which also sells fabric, they have a
beautiful little pink jacket on display made from polar fleece. They
pinked the edges of the facings (made from the same pink fleece) and
turned them to the outside and topstitched. Then they faced the top of
the little patch pockets the same way and added silk ribbon embroidery
across the top of the turned out facing. It is soooooooo lovely. I am
going to use these techniques on a robe for my GRANDdaughter. I tried
using my pinking shears but they just didn't "cut" it (pun intended) so
I bo't the pinking blade for my rotary cutter. It does a better job and
actually the little points are slightly larger than those on my shears
and almost appear like little scallops.
I found a sheet handed out at a Bernina Club entitled "Decorative "Shell
Tucks" and tried it on some scraps of this pink fleece. I tried a rose
colored DMC embroidery floss (6 strands) but it just didn't show up
enough so I tripled it (a total of 18 strands) and played with the width
and length until I got the effect I liked and it makes a lovely edge.
I'm considering using this around the edge of the aforementioned robe.
I have been so longwinded until I hate to give the detailed directions
for the "Decorative Shell Tucks", especially since you all probably know
how to do it better than me.*
Longwinded
Frances
*Should I have said "than I"?
WARNING: I'm only on page 2 of my digest-printout!!!
----------------------------------------------------------------------
Date: Tue, 25 Nov 1997 09:47:12 -0800 (PST)
Subject: Re: Plastic Bag Holder
You will be amazed at how simple this is to make. Cut a piece of fabric
about 12 inches by 8 inches, rectangle. Turn both short ends to make a
"casing", the top of the bag will have the drawstring (you can also use the
drawstring as a "hanger"), the bottom edge casing will hold the elastic.
You decide how tight you want the bottom to be, I think using a piece of
elastic about 5 inches long will hold the bags inside and still allow some
"give" when you pull out the bags to use. Now with Right Sides together
stitch between the two casings, turn and TA-DAA... feel free to make ANY
adjustments. This was off the top of my head using approximate sizes.
enjoy
----------------------------------------------------------------------
Date: Tue, 25 Nov 1997 10:06:00 -0600
Subject: Re: Renaissance shirt
Bernina wrote:
> Well, Ladies, here is a problem for you all. A dear friend of mine
> wishes a Renaissance shirt. Does anyone know where a pattern might be
> available?
> Thanks so much for all your messages.
> Janalyn
Hi, Janalyn. I remember seeing a renaissance shirt in one of my sewing
books. I'm not sure if it's what you want. If you don't receive any
responses by Friday, e-mail me, and I'll find it. I know where it is (I
have a book stash, too), but it will take some time to dig it out, and
I've got 12 family members coming for dinner Thursday.
Good luck.
Karen
----------------------------------------------------------------------
Date: Tue, 25 Nov 1997 11:48:53 +0000
Subject: Bernina 1090
If anyone is looking for a nearly new 1090, please contact me for
details at
Donna
----------------------------------------------------------------------
Date: Tue, 25 Nov 1997 06:33:28 -0500 (EST)
Subject: Re: Ultra Suede
Trudi there is a wright and wrong side to ultra suede. It also has a nap and
must be cut in one direction. Hope this helps.
----------------------------------------------------------------------
Date: Tue, 25 Nov 1997 06:06:44 -0500 (EST)
Subject: I touched a 180
I touched a 180,. the price I was told was $3495? What gives?
I don't know if I want it or not. It is a nice machine, but what difference
is there between my 1530, and my Deco. I like the set up I have now, I can
embroider and sew at the same time.
I think that is a lot of money for 1 machine.
Roni
----------------------------------------------------------------------
Date: Mon, 24 Nov 1997 20:47:41 -1000
Subject: Re: Christmas Gifts
Hi All!
I just whipped (and I mean whipped) up a couple of purses from Butterick
Pattern #3925. They are fast and easy (with a serger) and very
attractive. I made mine out of upholstery material and they came out
fabulous. I am making some more out of Hawaiin print barcloth (sp?).
Very reasonable (price wise) and fun! They also have a pattern for an
eye glass case that I plan to make out of the scraps.
Happy Holiday sewing to all!
Beth
----------------------------------------------------------------------
Date: Tue, 25 Nov 97 23:50:52
Subject: Re: Book Help
Yes, the book is by Carol Doak...I think the title is My First Quilting
Book (or it should be). I looked through it the other day, and it seems
quite good (not surprising--I like all of Carol's books). There are basic
quilting instructions and patterns for several small projects--a table
runner, wallhanging, etc.
Linda
----------------------------------------------------------------------
Date: Tue, 25 Nov 1997 23:34:39 -0500 (EST)
Subject: Lost Part
>Last night I noticed that one of the rubber gaskets on the underside of my
>machine fell off and I can't find it. This part surrounds one of the large
>nailheads on the corner. The machine wobbles unless I put something under it.
> I folded up a few scraps of fabric so it won't wobble but I'd like the part
>replaced. Its a 1260QPE. Does anyone know if it can be replaced ? TIA
Sue in Philadelphia
Sue..... if you can't get the rightt part quickly from Bernina, on my older
'Nina that part is a rubber bit held in place by a screw..... so hi yourself
to the nearest HARDWARE STORE, get a packet of assorted TAP/FAUCET WASHERS
and stack them to the right height, tthreading them onto the screw then
replace it.
Liz P.
----------------------------------------------------------------------
Subject: Any ideas?
Date: Tue, 25 Nov 1997 22:27:23 -0500
I had a very interesting request yesterday evening from a prospective
customer which I would like to share with you. This man was involved in a
car accident three years ago. This summer, tired of living on pain pills,
he had an operation which implanted a pair of electrodes at his spine. It
is called an external dorsal stimulator. The unit is entirely internal,
but he has to wear a power pack, or signaller (not sure which) and it has
to be fairly precisely placed, in front, just to the right of his navel.
He will be wearing this unit daily, and expects to do so for life.
He is happy to be more pain-free, but feeling self-conscious about what I
will call the power pack. He likes to have it under his clothes, but where
to stick the thing? He has tried taping it to his tummy -- rashy skin
stopped that. His doctor suggested an abdominal support belt that is
commonly sold for hernia sufferers, but he says it is bulky and he looks
heavier in it, plus its stiffness can be a real drawback to movement and
comfort.
So the problem is this: how to supply this man with the mental comfort
of wearing his power pack discreetly and the physical comfort of having it
securely placed on his body. We knocked around some ideas for duplicating
the belt in spandex, or making a snug "under-vest" or tank top with a
pocket. If I make a garment, he would like it to include a belt or
adjustment to snug the fit, so the unit doesn't shift from side to side,
and to be long enough to tuck it in. Precise placement is apparently
critical.
Can we please knock around some design ideas here, as well as fabric
thoughts? I'm considering the aspects of fitness wear which, especially
for women, tends to be form-fitting. I think we may need something along
these lines -- like a tank top or "muscle" shirt. On the other hand, a
friend whose son is a state trooper immediately thought of her son's gun
holster! I also thought of the elementary school patrol belts that kids
used to wear at the crossings (do they still?).
Sorry to be so long-winded. I have about a week to gather some
information before I will meet him. Any inspiration you all can offer
would be a great help to me and, more importantly, to him.
Thank you!
Susan
----------------------------------------------------------------------
Date: Tue, 25 Nov 1997 22:20:04 -0500 (EST)
Subject: Re: Purchase of 2000DE serger
. . . I have had one for a number of years and
think it is a great machine. I especially like the automatic tension, which
make threading very easy. Good luck with your decision. Alberta
----------------------------------------------------------------------
Subject: Re: Artista 180
Date: Tue, 25 Nov 1997 18:18:48 -0600
Wow, I can't believe the prices some of you have been quoted on the 180!!!
The machines in this area are generally going for around $3800 and the
software for about $1300-that totals up to $5100 plus tax. I actually ended
up getting my machine and software for even less than that!! There's a
great dealer in the area who believes in getting the sales instead of making
skyrocketed prices and not selling any. The best part is that he's a great
sewing machine mechanic, which is why I always go to him to buy my machines.
He may not have every gadget and part right in stock, but he can always just
call up and get it for me when I need it.
I find dealing with this man a true delight. Unlike the other Bernina
dealers in the area that are just plain rude sometimes.
Just my .02 on the subject.
ttyl,
Patti
----------------------------------------------------------------------
Date: Tue, 25 Nov 1997 19:29:07 -0500 (EST)
Subject: Re: Sliver Thread Problems
Sharon,
This post is a little late so you may have already solved your problem.
First of all do not use thread lubricant on sliver thread- because of what
the thread is made from. Another thing - try a microtex needle. Sew slowly.
Make sure that your thread is seated properly in the upper tension disk - if
not this can cause problems similar to what you have discribed. I have a
friend with a 1630 like mine and she does alot of free motion embroidery and
embellishment; however, she consistently had problems trying to use sliver.
She finally took her machine back to our dealer (who is a very thorough) and
he found that her machine needed adjusting. She did not go into details when
I saw her - just told me that he had fixed her problem. So it might not be
anything you are doing at all.
Shirley
Who has found that sewing machines are individuals. There are no two exactly
alike.
----------------------------------------------------------------------
Date: Tue, 25 Nov 1997 16:25:24 -0800
Subject: Book
Hi, wanted to ask you if you could give me the SIBN # to the book you
recommended on line callled Tucks, Textures and Pleats by Jenny Raiment.
Thanks so much,,
Patti
----------------------------------------------------------------------
Subject: Basting Spray, Magnets, etc. etc.
Date: Tue, 25 Nov 97 18:31:35 EST
Hi Fans: My Hancock's of Paducah catalog which came yesterday offers
Sullivan's basting spray at $8.98/can (reg. $17.98). Their e-mail address
is:hanpad@sunsix.infi.net Their web site is www.Hancocks-Paducah.com. You
can't beat their prices for Ginghers! Although they advertise Free Freight for
orders over $75.00 until Dec. 12th, I find it hard to believe there is never a S/H charge just because you e-mail them rather than snail mail. I could be wrong ....
Also, if you go into Bernina of USA on the net they state that there is NO
DANGER of using magnets near your computerized models of their machines, so go
ahead use any magnet pincushion you want. HOWEVER, wrist magnets will wreck
your watch; I learned the hard way.
I have a "peeve". So many times, you folks talk about shops, dealers, the
weather, special events, or where to find certain stuff, etc., etc. and you
frequently fail to give any information about where you are located in the
USA!!!! It makes me nuts! I sit here looking at your e-mail address trying to
find a clue! Can we all give a little hint such as NW Idaho, or just outside
LA, or central PA, something like that? It would do a lot to limit my
frustration, PUHLEEZ!
I know, I know, you're not going to pay any attention to me!!!!
Dennie
----------------------------------------------------------------------
Date: Tue, 25 Nov 1997 17:25:56 -0500 (EST)
Subject: Re: 2000DCE
Edie asked about our experiences with two sergers; I've had nothing but good
luck with my DCE. When you lift the pressure foot, the tension is released
so that you can pull thread thru the machine. In addition, the pressure foot
will swivel for easier threading. I sew a wide variety of fabric weights,
from denims to sheers, and I have not had to adjust the thread tension on the
looper threads. I've used a number of decor threads without trouble, altho
I have yet to get merino to sew correctly. I do not use the cover stitch
very much, mainly because I have trouble sewing evenly from the edge of the
fabric. (That's a driver problem, not a machine problem IMHO) I've had the
machine two years, and it's gone back to the store once for an annual
checkup.
The main drawback is that you have to go thru a number of steps to convert
from serging to cover stitching. I've gotten the conversion time down to 10
minutes from 20 minutes. (But again, a different driver may have it down to
5 by now.) I understand the 2500DCE doesn't require these conversion steps
any more.
I don't plan to upgrade to the new TOL serger, because the 2000DCE is working
so well. (Besides, I've preordered the Artista 180 & can't justify another
machine this year even to myself, let alone DH)
Micki
My 180 has arrived in the store & I pick it up tomorrow!!!!!
----------------------------------------------------------------------
Date: Tue, 25 Nov 1997 07:33:52 -0700
Subject: Artista/180/Used Machine
I went to a demo on the new 180 Saturday. Not only did I "bite", I
swallowed hook, line, and sinker. Now I have a used 1130 for sale. The
dealer who sold me my Artista will give the buyer of my used machine free
lessons as well, if in driving distance of Albuquerque.
Rita
----------------------------------------------------------------------
Date: Tue, 25 Nov 1997 12:29:48 -0500 (EST)
Subject: Precious Moments Card
Hi!
I just purchased the Precious Moments Card for my Deco 500. Is there a color
chart available? I would really appreciate it if someone could e-mail the
chart so that I can get started on sewing out the designs.
Thanks much.
Norma
----------------------------------------------------------------------
Date: Wed, 26 Nov 1997 02:57:56 -0800
Subject: shop info
>>Sister's Choice is at 533 Washington Road in Bridgeville which is in the
South Hills.You can reach it by getting off the Bridgeville exit of #79and
taking a right at the end of the ramp. Their phone number is 412-2209596.
You can call for better directions , because you may be coming from a
different direction! The sotre itself is in a smal strip of stores which
face a parking lot right on Washington Road.>
Amy, I am not picking on you, merely using your post to illustrate my
point.
I LOVE all the shop information that is made available through this
list, especially those that specify what they like about the shop.
However, most of the time I am frustrated by the lack of complete
information. Please. I cannot be the only one experiencing this
problem. Would those of you kind enough to share this information
please go one step further to give the COMPLETE address and phone
number? The directions are great, but where is the 412 area code? In
what state is Bridgeville located? Is Bridgeville a city in its own
right or merely a subdivision of South Hills?
Thanks, Amy, for being a good sport about my using your post to
demonstrate a growing frustration.
Ann
----------------------------------------------------------------------
Subject: HELP! HELP! Need "hand quilting stitch" for 1530
Date: Tue, 25 Nov 1997 11:10:54 -0800
Help! Please! I'm *finally* ready to try machine quilting using the "hand
quilting stitch" so many of you have talked about over the past couple years.
I've VERY VERY carefully saved the recipe on how to create that stitch....and I
saved it SOOOOO well that after two hours of looking for it, I GIVE UP!
Could someone pleeeeeeeze take pity on me and send me the instructions for that
stitch on the 1530? I would be ever so grateful and won't lose them this time.
Thanks!
Louise
on vacation and making Christmas present lap quilts
----------------------------------------------------------------------
Date: Wed, 26 Nov 1997 10:02:53 -0500 (EST)
Subject: Re: 1630 Updates
I did not receive anything with my update. What a pain to go through
everything and figure out what I got. The dealer told me that Bernina did
not send them any paperwork. I keep bugging them so maybe I will get
something
Patty
----------------------------------------------------------------------
Date: Wed, 26 Nov 1997 08:27:59 -0500
Subject: Burda Patterns, Bernina for Wives
Did I read this correctly? -- in the latest issue of Threads, there
was an article on Burda patterns and a statement made about the Burda
patterns that are in the monthly magazine are not the same as the
Burda patterns one would buy at the store. Is this correct? Liz
Powell, don't you get this magazine? Can you tell me more about
this? I have been hearing so much about Burda's superior fit but now
I don't know which ones they are talking about -- the ones in the
magazine or the ones in the store?
Peter & Bryan, I'm sure you will get alot of advice on this but my
advice to you would be to take your wife to the dealer(s) with you
when you go shopping for the BERNINA. It really is kind of a
personal thing in that your wife will feel a different connection
with each machine and she can only get that from sitting down in
front of it and using it. There are wonderful, wonderful, older
mechanical models alive and well and if you can possibly get your
hands on one of these, your wife will be very happy. The
possibilities are endless but I really wanted to relay to you to take
the ladies with you and let them test the machines.
Guaranteed happiness!
Cathy
----------------------------------------------------------------------
Date: Wed, 26 Nov 1997 10:17:50 -0500 (EST)
Subject: Buckwheat hulls
I don't remember which digest I saw the questions and information about
buckwheat hulls but I have ordered from this company and been very satisfied.
Bear American Marketing
PO BOX 829
BEAR DE 19701-0829
5 Lbs. Buckwheat Hulls --- $6.25
Shipping charges are based on zip code which for me in NC were about $5.00.
There is an e-mail address for this co. but I can't find it!
Martha Ann
----------------------------------------------------------------------
Date: Tue, 25 Nov 1997 10:10:52 -0500 (EST)
Subject: Computer machines/there is a difference
Both the 1260 and the 1630 are computer machines...both by the same company.
The main difference are the additional features that the 1630 has. I would
think that the basic stitch quality would be identical because the
technology is shared throughout all the computer machines.>>
Stitch mechanism:
The 1230 has an oscillating bobbin, CB (Bernina is famous for this)
1630 has a rotary, which all machines that does the 9mm needs.
The Artista 180=rotary
170=CB
----------------------------------------------------------------------
Date: Tue, 25 Nov 1997 15:32:01 -0500 (EST)
Subject: upgrade my 006 to 2000DCE?
I need your sage advice. I am getting very, very near the end of my 3 months
that I can upgrade to another model. I would like to have the cover stitch
but the price my store has for the new 2500 model is $2,199. They do have a
demo 2000 DCE for $1,699.
Comments, suggestions? I have enjoyed the 006 - no problems. I just did the
edge around a couple of baby blankets this week and thought the setting kept
moving and I had to readjust it as I went. I assume this is the norm.
Correct me if I am wrong please.
Help! I am getting down to the wire.
Yvonne
----------------------------------------------------------------------
Date: Tue, 25 Nov 1997 16:06:40 -0500 (EST)
Subject: Chanel jacket pattern
Can anybody out there please tell me where I can get a Chanel jacket pattern?
I have this beautiful piece of wool tapestry fabric and I am anxious to
tailor a jacket. Tia
Angie
----------------------------------------------------------------------
Date: Wed, 26 Nov 1997 14:35:07 -0800
Subject: Feetures book
Some weeks ago, somebody wrote about a book called Feetures, I guess is
by Bernina Co. I do not live in the States, so I had somebody look it
for me. She said that she went to a Bernina dealer in Forthworth,TX and
they told her that the book is given when you buy a sewing machine. I
boutht one but do not have that book. I am interested in getting it. The
person that wrote in the BD said that it is a must for a owner of a
Nina. Does anyone knows how to get it and where? Thanks
Cusy
----------------------------------------------------------------------
Date: Wed, 26 Nov 1997 10:22:00 -0500 (EST)
Subject: Re: How to get better lighting
This is Marcia....keeper of potted frogs......CHECK OUT OFFICE DEPOT before
you buy from a dealer or mailorder.........They have an OTT light for about
49.00
----------------------------------------------------------------------
Date: Wed, 26 Nov 1997 17:44:12 -0800 (PST)
Subject: Re: Comforter Cover
I don't know whether you'd be interested in my method, but I make a
comforter cover that is easy, has a lap, but no buttons. Here's what I do.
Using 2 top sheets, I cut the 'lap' from the wide hem end of a top sheet.
This works especially well if the hem (the part that normally would be
turned down over blankets) is decorative. First, I cut the top and bottom of
the comforter cover from two sheets, with the dimensions approximately 3/4"
bigger on all sides than the comforter. Then I cut a strip about 10 inches
wide, or whatever looks right with the particular sheet (and is equal to or
less than whatever fabric is left!) for the flap. I then take 6" pieces of
3/8" grosgrain ribbon and space them evenly across the edge (width) of the
flap. I take a raw edge of the top of the comforter cover and, with right
sides together (and the ribbon on the wrong side so that when it is sewn,
it'll be on the inside), I serge (nice but not essential) the seam. Then,
again with right sides together, I lay the bottom sheet of the comforter
cover, with all edges matching, and stitch the sides and bottom (note that
the sides of the flap are sewn into the side seams). When you turn it right
side out, you have an opening at the top of the inside of the flap. I then
sew matching 6" pieces of grograin along the top of the top sheet (the part
that goes under the flap). Slide in your comforter and tie. Also, please
note that I use fray check on the ends of the ribbon to prevent raveling.
I've made about a dozen of these for me and for friends, and they work great
and you don't have to worry about sewing on buttons or making buttonholes.
You can turn one out in about 1/2 an hour.
Good luck!
Nancy
----------------------------------------------------------------------
Date: Wed, 26 Nov 1997 18:29:17 -0600
Subject: Re: Renaissance shirt
Hi Janalyn,
I think I have a sourse for what your looking for. I'm not sure if this
company is still in business as I haven't ordered from them for quite a while.
Harper House
P.O. Box 39
Williamstown, PA 17098
Phone: 717-647-2480
In the cataloge I have they have a brand of patterns called "Period
Patterns". One of the patterns is called "Men's Italian Renaissance
Garments". There is a pattern for "Women's Italian Renaissaunce Gowns. I
am into Victorian clothing and have ordered several patterns from Harper
House. I've had really good luck with them.
Hope this helps,
Best Wishes,
Denise
----------------------------------------------------------------------
Subject: New 170 & 180 embroidry/sewing machines
Date: Thu, 27 Nov 1997 09:42:16 +1100
We are Bernina enthusiasts/dealers in Melbourne, Australia. Our area of
specialty is embroidery machines. Has anyone used the new 170 or 180? We
especially want to know is capabilities with regard to 1) embroidery area
2) designs inbuilt 3) designs avaliable on memory card.
This is my first time "surfing" the net/sending email. Hope to make some
OS sewing friends and exchange ideas.
Jennifer
----------------------------------------------------------------------
Subject: Adhesive Spray
Date: Tue, 25 Nov 1997 13:42:57 -0800
Hi: Someone was just talking about ATP 505 Adhesive Spray ordered from
Nancy's Notions. Is that the same as the Sullivan Spray previously
mentioned. I wrote in asking for more information about where to buy the
Sullivan Spray. I bought Duro All purpose Spray Adhesive last year when I
was covering bankers boxes with fabics to make memory boxes. It worked
great as an adhesive, and I used it once on the ends of a quilt to hold the
batting flat before binding. I am not sure about sewing thru it.
It say clear, works fast, bonds trong, works on paper, fabrics leather,
etc.
I would appreciate more information on the ATP505 and Sullivan. How is
works, where to buy, cost, etc. Thank you. jr
----------------------------------------------------------------------
Date: Tue, 25 Nov 1997 14:50:11 -0600 (CST)
Subject: Kids Sewing
Dawn: Thanks for the response and ideas. However, I am a Home Ec.
teacher and already have a fully equiped lab. We don't have study halls,
and lunch is 25 minutes. The students barely have time to eat. I come in
at 7 AM and often stay until 6 or later at night so kids can come in and
sew. The idea is not to equip a school lab, but to get machines into the
hands of kids who have discovered a love for sewing through my classes and
efforts before and after school, so they can have a machine at home to sew
on when they have moved on to the high school. Although kids often come
back to me or go to the HS teachers for help if they are stumped on
something. My idea is to have kids develop "sweat equity" in their
machine by helping clean and recondition it, then make a certain number of
items for charity. My classes each year make at least one project for
charity: quilts for tornado victims, sweat shirt jacs for Headstart, etc.
My church women have donated fabric, and the local Hancock's manager has
given boxes of trims, and special prices on fabrics. Next semester, I
will begin a pilot program of teaching pattern drafting and design while
they are learning to sew. The idea is to eliminate the amount of time
spent fitting so they can get more projects done, by using their own
sloper. It sounds exciting and I think it will excite even more kids.
Home Ec. teachers also sponsor a club, FHA. ( And I sponsor a Before
School Bible Study Youth group that meets in my room for study and prayer
once a week.) Again, what I need is a way to collect machines and get
them to deserving students who have become excited about sewing, so they
can sew at home. I can use my Home Ec. (old name)-New Name: Family and
Consumer Science room for teaching here after school, Saturday's, etc.
but I
have to have some life ( and time to sew) for myself. LaWayne
----------------------------------------------------------------------
Date: Thu, 27 Nov 1997 17:32:11 +1100
Subject: Plastic Bag Holder
> Does anyone out there have some simple instructions, I know it has elastic
on
one side and draw string the other, but I don't know which side is which and
how long and wide to make it.
> Thank you for any help. joyce
Hi Joyce,
This is how I make Plastic Bag Holders: Take one tea towel and cut a
piece of calico(sorry muslin in US!) same size, embroider something
kitcheny or "Plastic Bags" or appropriate to the person receiving the
bag, in the centre, fold down and press 1" double hem top &
bottom,stitch across twice to form channel for elastic,1/4 of the way
from each side attach 1" wide tape to the top hem for the hanger, thread
8" of 1/4 inch elastic thru' top and bottom hem and stitch across ends
to hold, now join centre back seam!! A Bag of Bags!!
I keep a few on hand as they make a handy gift for any occassion or time
of year.
I only use the tea towel for approximate size but I have seen them made
using the tea towel but us sewists are more creative than that, aren't
we!?!
Good luck, if you have any problems with my explaination let me know and
I'll try again.
Jeanne
----------------------------------------------------------------------
Date: Wed, 26 Nov 1997 09:37:27 -0500 (EST)
Subject: Re: Book Help
I remember seeing the book that you mention advertised, but haven't looked at
the book. I do know that Carol Doak writes good books. You could try a
search by author with the online book stores. There's:
2millionbooks.com
barnesandnoble.com
amazonbooks.com
I've found a new Patchwork Place book that seems promising for teaching
children to quilt. It's "Kids Can Quilt" by Barbara Eikmeier.
Janet
----------------------------------------------------------------------
Subject: RE: Textile Outfitters
Date: Wed, 26 Nov 1997 16:33:34 -0700
Hi Linda
Here's the scoop... The new address is "www.justmakeit.com" of TEXTILE
OUTFITTERS. Check it out.
I'm copying this to other newgroups, as my Thursday hint or source, of course
one day early.
This is a really neat store, and the selection is fabulous.
Regards
Linda
(No affiliation... just a satisfied customer)
----------------------------------------------------------------------
Date: Wed, 26 Nov 1997 22:03:18 -0400
Subject: Re: Renaissance shirt
Janalyn Lindley (Janalyn@goodnews.net) wrote:
> A dear friend of mine wishes a Renaissance shirt. Does anyone know where a
pattern might be available?
I have a pattern for ladies' Renaissance costumes: Simplicity 7756. I
haven't made anything yet, but the photograph sold me - they look like
real clothes as opposed to "costumes," like some other time/culture
patterns do. There is a set of men's patterns as well, but I don't have
the number.
If you can get to a Jo Ann's fabric store, they will have Simplicity
patterns for 99 cents on Fri & Sat (11/28-29). The regular price for
this pattern is $9.95.
Sylvia
----------------------------------------------------------------------
Date: Wed, 26 Nov 1997 21:52:15 -0400
Subject: 1630 and the Walking Foot
Marcia wrote:
> The Walking Foot box show the correct part # as 003 208 70 00
HOWEVER, the Bernina booklet inside that box has part # ...003 209
5000 printed on it. The foot itself has no part number on it. The white
casing has a raised logo BERNINA ON BOTH SIDES.
My box and booklet numbers are the same as yours. And my foot looks like
yours - relax. :)
I guess they just didn't want to print separate booklets for the new
1630 foot.
Sylvia
----------------------------------------------------------------------
Date: Wed, 26 Nov 1997 22:49:36 -0500 (EST)
Subject: Re: Bernina Dealers in Houston
Sylvia,
"It's A Stitch" is located in Humble (north outer area of Houston) and in SW
Houston on Richmond. Terrific Dealer & a lot going on at the shops re:
classes, clubs, etc. Machine software classes, too.
The shop in Humble is a Quilt Shop/Sewing Machine Store, with books,
patterns, samples, etc. & customer service. The shop on Richmond provides
the same thing minus the fabric. Both shops carry Bernina, Pfaff & Brother.
Great after the sale service.
Barbara
----------------------------------------------------------------------
Date: Thu, 27 Nov 1997 17:49:31 -0500 (EST)
Subject: Ruffler
Hello!
I have purchased a ruffler for my 1130 and find the enclosed instructions a
little vague. Can anyone tell me how to determine stitch length and ruffler
setting to make a dust ruffle that would be gathered to 2 1/2 times the
length of the finished ruffle? Thanks!
Happy Thanksgiving!
Dorothy...who is still learning her machine :)
----------------------------------------------------------------------
Date: Thu, 27 Nov 1997 16:23:51 -0800
Subject: Preemie Clothes
A couple of weeks ago I saw a post about someone wanting to sew premie
clothes. Check out this site for a free preemie gown and bonnet
pattern! The url is http://www.geocities.com/Heartland/5183/preemie.htm
Happy Sewing
Kay
----------------------------------------------------------------------
Date: Wed, 26 Nov 1997 22:07:11 -0400
Subject: Alpine Fleece?
I saw some fabric labeled "Alpine Fleece." Is that Polar Fleece of a
different brand name? Is is as good?
Sylvia
----------------------------------------------------------------------
Date: Wed, 26 Nov 1997 22:22:47 -0400
Subject: Purchase advice - Bernina Machine
Bryan writes:
> I am hoping to tap the wisdom of this list for help in buying a new
Bernina machine for my wife as a gift.
Wonderful!!! Are there more of you out there??? :D
I do want to be sure that this isn't a "surprise" gift - she must pick
her own - VERY IMPORTANT. Once someone tells you about dealers in your
area, have her stop by and test-drive the machines herself. If you can
get to more than one Bernina dealer, do so. Your wife should explain
what she intends to use the machine for - the most expensive is not
always the best for everyone, it depends on one's needs.
You will want to also consider the kind of service offered by your
dealer. What's the turn-around time on tune-ups, things like that. And
ask about their "Bernina Club." This is an expensive purchase, you
should get a lot of pleasant, patience help from the dealer in making
your choice.
I am very happy with my 1630. I got it originally for quilting, but have
gone into garment construction because my machine made it so easy
(especially the buttonhole features)!
Have fun with your hunt! Let us know what she chose!
Sylvia
----------------------------------------------------------------------
Date: Thu, 27 Nov 1997 11:07:54 -0500 (EST)
Subject: 1630 Update
Sylvia- When I updated my 1630 I got a photocopy of the new letters to use
like the plastic ones that came with the original and a sticker on my
machine.
Carol
----------------------------------------------------------------------
Date: Wed, 26 Nov 1997 10:22:02 -0500 (EST)
Subject: Re: Purchase advice - Bernina Machine
Brian.................contact Bernina directly on their 1-800 #. They will
give you a complete list of Bernina Dealers near you. Also....yes, there are
new models out there.....You can see them and read about them on the Bernina
website................
put in, and surf the pages there and read about the
160.150.180 ARTISTA and so on. The #180 goes for around 1,899.00 new and the
Artista for nearly 4,000 or more.Consider buying a trade in #1630, or
1530....even the 1260.....they are all wonderful machines and wil come with
guarantees and several lessons included in the purchase price.
Good luck
----------------------------------------------------------------------
Date: Wed, 26 Nov 1997 11:00:13 -0500 (EST)
Subject: Sullivan Spray
In a message dated 97-11-25 00:14:39 EST, you write:
>> Tell me more about the Sullivan's spray on Adhesive and this quilt/fabric
shop in Hollywood. I live about 45 minutes from the town and could
investigate it for you. >>
I have seen the Sullivan's adhesive at the Fabric King/Mae's store here in
Miami, too. They stock it near the interfacings. I haven't tried it yet,
but plan to for my next project.
Pam
----------------------------------------------------------------------
Date: Wed, 26 Nov 1997 08:17:31 -0500 (EST)
Subject: Quick Gift
In a message dated 97-11-25 02:46:30 EST, you write:
>> Hi, I wonder if someone could suggest something for my sewing
guild. We have a gift exchange and I need to make a gift for
$5.00 and over. >>
How about one of those drawstring jewelry pouches. I made mine lined with
silver cloth.
Gail
----------------------------------------------------------------------
Date: Thu, 27 Nov 1997 19:55:28 -0500
Subject: Books looking for new homes
Hi everyone,
I've been going through my bookcase and selecting out books that want a
new home where they will be used. Quilting, heirloom sewing, silk
ribbon as well as a couple Williamsburg books are available in almost
new condition. If interested, please email me privately at
sherylah@clover.net and I will email you the list.
Happy holidays to all!
Sheryl
----------------------------------------------------------------------
Date: Thu, 27 Nov 1997 12:19:35 -0500
Subject: 1630 update documentation
Sylvia,
No, I got nothing whatsoever when I had my machine upgraded. In fact, I
had to search all over the machine trying to "spot the difference"!
Not so good when you're spending so much money, is it? (In fact I felt
rather foolish opting to spend so much when I couldn't remember what new
features were going to be added)
I found: hand look quilt stitch, replacement floral stitches instead
of zodiac, scalable monograms (I think) - I already had the new "s" and
a separate balance sheet came with my machine when I bought it.
Did I miss anything?!?
Gill
----------------------------------------------------------------------
Subject: Artista 170 & 180
Date: Fri, 28 Nov 1997 11:51:48 +1100
I am an Aussie Bernina fan and embroidery enthusiast. Very interested in
reading more about the new machines. Can anyone tell me how large the
embroidery field is?
Has anyone had "hands on" experience of the software? Unfortunately we
will not receive the Artista until next year. Thirsty for some DETAILED
information.
----------------------------------------------------------------------
Date: Thu, 27 Nov 1997 20:23:38 -0600
Subject: Book help
Beth in Maui--the book you're looking for is called "Your First Quilt
Book (or it should be!)" by Carol Doak. It's available from That
Patchwork Place. I think they have a website, but can't tell you right
now what the url is.
Helen
----------------------------------------------------------------------
Date: Fri, 28 Nov 1997 00:11:50 -0500 (EST)
Subject: Re: 840 vs. 830
Patti J.C. . . . You asked about how the 840 is different from the 830--well,
the 840 is a flatbed model versus the freearm 830 models. It may also have a
rotary hook bobbin case like the 740, but I don't know. Alberta
----------------------------------------------------------------------
Date: Fri, 28 Nov 1997 00:00:30 -0800
Subject: Re: Comforter Cover
I made a twin comforter cover useing two flat sheets.Over-lapped 4"
sewed in 8" from each edge(sides) then started the opening, spacing the
buttons 8 1/2",3/4"sz. buttons. This has worked great,you can make a
cuff to hide the buttons or put the button holes on the inside. Lots of
luck.
----------------------------------------------------------------------
Subject: adhesive spray
Date: Fri, 28 Nov 1997 09:44:47 -0500
Hi everyone,
I just called Nancy's Notions about the Temporary Adhesive Spray because I
could not find it in the online catalog. They do have it and it is order
number ATP2, $8.75.
The online catalog states clearly that there are no s and h charges on
orders over $25 through the end of the month of December. However, I placed
the order and the operator added the extra charge for s and h. I said,
no...the online catalog clearly states no sh for over $25. She said, well,
is there a special number code? I looked and there was not. I read her the
whole screen...she left the phone and came back after awhile and said she
would give me the order without s and h [as though it were a special favor].
So, if you do call an order in, be certain that you aren't getting sh tacked
on by operators who may not be in the know on this. If I hadn't insisted, I
would have been paying $10 more.
BTW, there are some good specials. I ordered a couple of the pedal sta
things for both my machine and serger as none of the homemade things I have
rigged have worked for me. Pedal scoot is one bane of my existence. Also a
nice deal on assorted machine needles as well as a metrosene thread
collection...18 spools for 12.95.
Hope this spray works for holding my quilt layers together. Maybe I'll
finally get the thing done!
Regards, Carol G.
----------------------------------------------------------------------
Date: Fri, 28 Nov 1997 09:57:51 +0000
Subject: Difference between 1630 and 1260
I have seen several comments about thedifferences between these two
machines. Having just sold my quilt shop/Bernina dealership, I think I
can speak with a modicum of authority about the machines. The primary
difference (once you subtract all the "bells and whistles" lies in the
hook system.
The hook is what holds the bobbin. The oscillating hook (found in the
1260) was, until the 1630, the heart of the Bernina machine. It gave a
90% reliability factor as opposed to about 45% for rotating hooks.
It also made possible a non jamming hook and automatic tension balance.
I was thrilled with the 1630 when it came out - until I had sewed on it
for a time. For personal use, I went back to a 1260 even though I could
not do all the things the 1630 offered. And ultimately, I went to a
1530 which has the screen like the 1630 but the oscillating hook of the
earlier machines.
This is my own opinion - I don't stand on soapboxes about it. But,even
with the new series, you'll find oscillating hooks all the way up to the
180, which, again, has to have the rotary hook in order to make wider
stitches. I'm not ositive about the 170.
----------------------------------------------------------------------
Date: Fri, 28 Nov 1997 08:55:28 -0500 (EST)
Subject: 180 versus Pfaff 7570
Well, I have asked this on the Pfaff list and thought I better ask here...I
currently own a Bernina 1180 (that I love). But I have seen the new Bernina
Artista 180 at the dealer and fell in love..............I want to
upgrade....but to be fair, since I am considering a new machine after all of
this time...I thought I better shop around. I did look at the Pfaff 7570,
and since I am a quilter - I do like their dual feed feature (even better
than when I use my walking foot on my 1180), they also have the quilting
stitches stippling, mock hand look that is on the 180...the Pfaff is the only
other machine I am considering along with the Bernina 180. (The Pfaff is on
sale, and one year same as cash). Also, I was really surprised at the staff
at the Pfaff store, they had a class going - but everyone was so
enthusiastic, and friendly and cheerful ... it is a Viking dealership
too.....but they really seem to be a great group, and I have since heard good
things about the owners (the Bernina shop where I am at has wonderful owners
too)...so I know I would good get good follow up service here no matter which
machine I decide on. It is a difficult decision, because I have a Bernina
serger also, and I know the quality...I don't know anyone that has the 180
yet to even ask them about it. So, any feedback, especially from those of
you that have sewn on both machines, would be appreciated! And I am
anxiously waiting for the new 180 owners to tell us about their machines!
Thank you for your time!! I am trying to be patient and shop around....but I
really just want to make up my mind, so I can get it home and start sewing!!
(^.,.^)~QuiltMouse
----------------------------------------------------------------------
Date: Fri, 28 Nov 97 08:47:17 UT
Subject: RE: Hancock's
Someone mentioned feeling uncomfortable about ordering online from Hancock's
of Paducah -- I emailed them last week and they said that they are upgrading
their site and will have a "secure order form" (encrypted credit card
information) on the web site by about the end of the year.
Good news, huh?
Pam
----------------------------------------------------------------------
Date: Fri, 28 Nov 97 09:36:45 UT
Subject: RE: Bernina 840/ bobbins for 930
If I remember right, when my 830 was purchased new in 1975, it was almost
top-of-the-line. There was one model above it, which I *think* was an 840. I
think the 930 came after that. I might be totally off on my recollections,
though.
Bobbins for your 930 are still available from any Bernina dealer. Just tell
them the model number and they will steer you to the right bobbins for your
machine. Like my 830, they probably come in a choice of clear plastic,
"holey" metal, or metal with solid sides.
Pam
----------------------------------------------------------------------
Date: Fri, 28 Nov 97 09:33:43 UT
Subject: RE: Seersucker
Cusy posted:
>Pamela, I guess you are right, I called it pop corn material because that is
how we call it here in Panama, C.A> Do you iron while you sew this material?
Cusy >
Carefully press the seam but don't smash down the fabric on each side of the
seam. Pressing over a fat dowel (like a closet rod) works well, or just use
the tip of the iron.
On seersucker, there is a flat portion and a ripply portion. You'll want the
flat part flat, but you do not want to try to flatten the ripply part.
I wish I could be more specific, but the shorts and pants I made were about 24
years ago.....
Pam
----------------------------------------------------------------------
Date: Fri, 28 Nov 97 15:07:37 -0800
Subject: Dealer
I would like to have a Bernina sewing machine served near New Iberia ,
La. There is no dealership here. Please let me know the closest
location to my area.
Thanks,
Pam
----------------------------------------------------------------------
Date: Fri, 28 Nov 1997 14:01:52 -0600
Subject: Quick make and take project
My girlfriend is putting on a quilt retreat and needs ideas for a get
aquainted night. She would like to provide a quick little project for
everyone to do. I have cut 3 felt leaves and sewed a button on the stem
to make a little needle holder. Any other ideas?
- --
Trish
----------------------------------------------------------------------
Date: Fri, 28 Nov 1997 16:44:33 -0500 (EST)
Subject: Re: Purchase Advice - Bernina Machine
>From what I have heard, there is a big difference between a pfaff and
bernina machine..my neighbor has a top of the line pfaff and has had it in
more than once with "adjustments" in tension, etc. Probably someone
familiar with the inner workings could help you understand the differences.
I had a 1090 machine and traded up for a 1530. I would have been happy with
the 1230 machine now that I evaluate it..but I love the 1530. I have a 3/4
DE bernette serger which I love..It is the one in the metal casing that was
just under the top of the line one at that time. They discontinued it a
years or so ago. I have never had either machine in the shop for repairs,
and they are both used ALOT. I sew for myself and for 3
granddaughters...everything from shorts to dresses to polarfleece coats to
jumpers to jeans, etc. I had an ELNA super air electronic machine
(mechanical, rather than computer). I was more impressed with Bernina than
Elna. Another consideration is the store that carries/services them. I
really liked the people at the Bernina store and the classes and the
support. My husband talked to the person that did the repairs and was very
impressed. The ELNA place was further away, and I never felt comfortable
there. The people at the place that sells Pfaff didn't have any
classes..couldn't speak English well..and couldn't explain their products
and the differences well. Not that you will need much service..but you
never know.
Good Luck.
----------------------------------------------------------------------
Date: Fri, 28 Nov 1997 15:01:31 -0500 (EST)
Subject: Re: Parking Garage
The "jammers parking garage" people are talking about are in the toy dept. at
Wal-mart. They are great for storing thread and anything else that will fit
in them.
Barbara
----------------------------------------------------------------------
Subject: Re: Book Help
Date: Fri, 28 Nov 1997 13:58:24 EST
On Tue, 25 Nov 1997 21:21:48 -0500 Bernina writes:
>
>I saw a new book advertised a while back -- My First Quilt or
>something
>of that nature. I would like to get it for my niece for Christmas -
>but
>can't find it. Is it by Carole Doak? Does anyone have a clue about
>what I am talking about? Any suggestions would be very much welcomed!
>
>TIA
>
>Beth
Beth, the book you're thinking of is "Your First QUILT BOOK (or it should
be!)" by Carol Doak. It is available through the quilter's mail order
catalogue: Connecting Threads, PO Box 8940, Vancouver, WA 98668-8940,
1-800-574-6454. It is shown on page 36 of the Wish List Edition 1997.
The suggested retail price is 19.95 but Connecting Threads sells it for
15.96.
Good Luck -- and Happy Holidays!
Becky
----------------------------------------------------------------------
Subject: Re: Plastic Bag Holders
Date: Fri, 28 Nov 1997 08:04:21 -0800
Thank you for the great instructions. I like the plastic bag idea, but now
you gave me a new idea for my quilting group, they can put their little
scraps in it. Have a great holiday. joyce
----------------------------------------------------------------------
Date: Fri, 28 Nov 1997 10:01:50 +0000
Subject: Re: Parking Garage
MK...about those parking garages...
I'm probably one of those from Florida who was talking about them before.
They
have no drawers, They're sold in the toy dept of Wal-Mart, and I've heard
some
have found them in Target's. They're sold to store individual matchbox cars
that kids collect. The unit is clear plastic with a lid on both sides. Snap
open each lid and there are open compartments that are just the right height
(length) for sulky/gutterman thread or sewing machine feet..
Each of the 2 sides have about 30 compartments...and it's better without
drawers.
Bev
----------------------------------------------------------------------
Date: Fri, 28 Nov 1997 21:15:02 -0700
Subject: Re: Bernina 840
> I'm hoping someone will know the answer to my question out there. I have a
> chance to get an 840. Does anyone know what is different on this model from
> an 830??
>
> Patti J.C.
Patti,
I would assume that the 840 is a flatbed machine, not having the arm for
sleeves, etc. like the 830 has.
Kathy
----------------------------------------------------------------------
Date: Fri, 28 Nov 1997 17:28:41 -0800
Subject: I saw the 180 today
I was at Famous Fabrics in Monroe, LA and got to meet the 180
in person and I can tell you that I am pretty impressed. Did you know
that you can use the free arm on the sewing machine to do the embroidery
on cuffs and pants legs? If I were in the market to purchase a TOL
combo embroidery and sewing machine this would be the one. I won't be
buying this machine any time soon because of the price. If I went back
to work I could afford it but then I would not have time to sew. Oh,
well maybe I will luck up and will the Publishers' Clearinghouse on New
Years Day.
Kay
----------------------------------------------------------------------
Subject: adhesive, Nancy's, etc.
Date: Fri, 28 Nov 1997 21:38:33 -0500
I just called Nancy's Notions about the Temporary Adhesive Spray because I
could not find it in the online catalog. They do have it and it is order
number ATP2, $8.75.
The online catalog states clearly that there are no s and h charges on
orders over $25 through the end of the month of December. However, I placed
the order and the operator added the extra charge for s and h. I said,
no...the online catalog clearly states no sh for over $25. She said, well,
is there a special number code? I looked and there was not. I read her the
whole screen...she left the phone and came back after awhile and said she
would give me the order without s and h [as though it were a special favor].
So, if you do call an order in, be certain that you aren't getting sh tacked
on by operators who may not be in the know on this. If I hadn't insisted, I
would have been paying $10 more.
BTW, there are some good specials. I ordered a couple of the pedal sta
things for both my machine and serger as none of the homemade things I have
rigged have worked for me. Pedal scoot is one bane of my existence. Also a
nice deal on assorted machine needles as well as a metrosene thread
collection...18 spools for 12.95.
Hope this spray works for holding my quilt layers together. Maybe I'll
finally get the thing done!
Regards, Carol G.
----------------------------------------------------------------------
Date: Fri, 28 Nov 1997 20:11:20 -0500 (EST)
Subject: Stain out?
Does anyone know how to remove a stain in from material? I was just
ironing on some appliques, and some of the color from that material
stained my background! Help. Can anyone help? I tried to get it out,
but it won't budge.
Thanks,
Sue
----------------------------------------------------------------------
Date: Fri, 28 Nov 1997 16:56:59 -0500 (EST)
Subject: Re: Plastic Bag Holder
A very simple bag holder can be made with a kitchen towel (match the
kitchen!). Stitch up the long side to make a tube, make casings top and
bottom for elastic or drawstring, and you're done!
----------------------------------------------------------------------
Date: Fri, 28 Nov 1997 20:11:20 -0500 (EST)
Subject: Stain out?
Does anyone know how to remove a stain in from material? I was just
ironing on some appliques, and some of the color from that material
stained my background! Help. Can anyone help? I tried to get it out,
but it won't budge.
Thanks,
Sue
----------------------------------------------------------------------
Date: Fri, 28 Nov 1997 18:53:58 -0500
Subject: Re:angels
When the discussion of how to make a Christmas tree "angel" ornament was
around.. I thought I wasn't interested. My mind has been changed. Can
somebody send me directions? Sorry now that I didn't save it.
Trudi
----------------------------------------------------------------------
Date: Fri, 28 Nov 1997 23:11:32 +0000
Subject: Re: Bobbins
For those who have been asking about suitable bobbins for their
Berninas, ALL Berninas except the 1630 use the same bobbin size. It is
important to note that some of the older ones are solid metal sides.
These are okay However, and this is important, the bobbins with holes
in the sides must be the 7-hole kind! Be aware of this and be sure to
count holes! Some of the Bernettes use a "10-holer." These can cause
problems if used in the regular Berninas.
I would recommend getting Bernina bobbins - not generic ones. The main
thing, however, is to use only those with 7 holes in them.
Donna
----------------------------------------------------------------------
Subject: Re: Plastic Bag Holder
Date: Sat, 29 Nov 1997 01:47:20 -0800
It sounds like your grand daughter is doing wonderfully well. How great
that you too can work together. I was thinking of embroidering "Le Bag" or
the person's name on it. Joyce
----------------------------------------------------------------------
Date: Fri, 28 Nov 1997 19:10:01 -0500
Subject: Parking Garage
At 08:53 PM 11/27/97 -0500, you wrote:
> Some time ago I saw a mention about "jammers parking garage" at
>Walmart. I got the impression that it was used for storing sewing machine
> Can someone clear up my questions? I think the people talking about
>these things were from the Florida area.
> TIA from MK in the Hi Plains where it is a comfy 50 degrees. WOW
The parking garages are found in the toy department and are meant foe
displaying small model cars like matchbox cars. I bought a couple and they
hold a lot of sulky rayon threads. Keeps dust out and you can see the
colours through the plastic. cost was $6.99 last summer - have no idea what
they are now.
JS
----------------------------------------------------------------------
Date: Fri, 28 Nov 1997 23:11:32 +0000
Subject: Re: Bobbins
For those who have been asking about suitable bobbins for their
Berninas, ALL Berninas except the 1630 use the same bobbin size. It is
important to note that some of the older ones are solid metal sides.
These are okay However, and this is important, the bobbins with holes
in the sides must be the 7-hole kind! Be aware of this and be sure to
count holes! Some of the Bernettes use a "10-holer." These can cause
problems if used in the regular Berninas.
I would recommend getting Bernina bobbins - not generic ones. The main
thing, however, is to use only those with 7 holes in them.
Donna
----------------------------------------------------------------------
Date: Sat, 29 Nov 1997 02:53:39 -0500 (EST)
Subject: Re: Parking Garage
Hi
The Jammers Parking Garage for Hot Wheels can be found in the toy department.
I got mine at Wal-Mart for $6.95. It will hold spools of thread or you can
use it to store your extra Bernina feet. Hope this helps.
Joyce
----------------------------------------------------------------------
Subject: Re: 1260
Date: Sat, 29 Nov 1997 06:44:32 -0600
Hi,
The 1260 is not a compputer! It is an electronic machine. It is a wonderful
machine however that does do a fine stitch.
Regards, LIDA
----------------------------------------------------------------------
Date: Sat, 29 Nov 1997 07:05:07 -0500 (EST)
Subject: Re: Speaking of Parts...
The bobbins for the Bernina 930 are the same size that the Singer
Featherweight uses. I have both the original metal Berninas and many of the
Singer metal ones that have multiholes on the casing. Both work fine. They
are sold in Singer stores on cards hanging on wall displays, just ask for the
ones to fit the FWs. Happy sewing!
Jill
----------------------------------------------------------------------
Date: Fri, 28 Nov 1997 21:33:48 -0500
Subject: denim quilt
Hi all -
I have a 1260 and would like to make a denim quilt with a flannel
backing for my son, who will be starting college in the fall. Although I
know *basically* how I want to do it, there are some pesky details that
elude me.
I'd like to do it crazy-quilt style, and I think it will be heavy enough
to not need batting. I was planning on sewing the denim scraps on right
side up, overlapping the edges of each patch/strip and just stitching it
down (straight stitch? serpentine stitch? simple zig-zag?), leaving the
raw edges exposed on the top - but how do I handle the edges of each
block? Won't it create bulky ridges to join the blocks so the seam is on
the top? Also, I was thinking of making each block 20" square - is that
too big for this technique?
Any suggestions/personal experiences? Thanks!
Barb
----------------------------------------------------------------------
Date: Sat, 29 Nov 1997 10:16:38 -0500 (EST)
Subject: Re: Teaching kids to sew
Well, I finally did it! With much fear and trembling, I decided to teach my 9
year old daughter to sew. ( A bribe to get her to clean her room - it worked)
I thought that a pieced vest would be a good choice- next to impossible to
screw up, and something that she can WEAR, and say " I made this". Anyway,
first lesson was the rotary cutter- a self retracting one, for safety
reasons! She cut out the muslin foundation pieces, and the back, learned how
to thread the machine, basted the back to the foundation, and then started
piecing the fronts. She finished one front piece, has sewn it to the back,
and has only one more piece of fabric to sew onto the other front piece.
After that, she will make a lining, and I will help her put it in. She is
REALLY looking forward to finishing this project. By the way, she is the ONLY
one of four kids to show any interest. The older kids like for me to make
things FOR them, just no interest in doing it themselves. Figured I'd better
teach this one before the interest faded, and maybe start her on a lifelong
habit of sewing....Next step, QUILTING!
I was amazed at how EASILY she has picked up everything so far, and talk
about a confidence builder! Thanks for listening.
Vicki
----------------------------------------------------------------------
Date: Sat, 29 Nov 1997 09:56:25 -0500 (EST)
Subject: #9 on 1630
In a message dated 97-09-30 05:59:34 EDT, Bernina@ttsw.com writes:
>> I have a 1230 also and I have very short arms (I am only 4' 11") so I have
to cuff or shorten EVERYTHING. Use stitch #9 for a coverstitch look. Because it
is a reverse cycle stitch it doesen't stretch out the knits either. >>
What does stitch #9 translate to on the 1630?
----------------------------------------------------------------------
Date: Sat, 29 Nov 1997 17:22:16 -0500
Subject: Should I upgrade?????
I usually just read the list, but now I have something to post, actually
two somethings.
I recently (5 months ago) purchased a Virtuosa 150. I really like it, but
am wondering if I should trade up to one of the new, top of the line
machines. My dealer will give me full credit for my machine through the end
of December, so I need to decide soon. Pros and cons? Most of my sewing is
dollmaking and quilting, but I do still make some garments.
Also, I still have my Bernina 910 which I've been saving to give to my
daughter. Perhaps I should trade this one in as well? (My daughter is only
six years old)
Second question: about the new Bernina dealer in Manhattan. I bought my 910
in Manhattan back in 1984. That dealer is now gone. I currently live in
Brooklyn and am unaware of a real dealer here. Who is he/she???? I know of
one place in Boro Park which nominally sells Berninas and a quilt shop
which does the same. Neither would I call "serious" dealer.
Thanks!!!!
Abby
----------------------------------------------------------------------
Date: Sat, 29 Nov 1997 11:33:08 -0500 (EST)
Subject: Clotilde?
Someone wrote :
"You can order bobbins for your Bernina from Clotilde if you have a catalog."
What is Clotilde? How can I get a catalog?
Thanks
Beatrice
----------------------------------------------------------------------
Date: Sat, 29 Nov 1997 09:57:20 -0600
Subject: Chef's coats
Anyone ever see a pattern for a chef's coats???
My daughter needs several and it just seemed like an easy thing to buy a
couple but she is slim and almost all the uniform stores have coats
meant to fit Paul Prudhomme!
We've done well with sewing some fun pants...but before I start pattern
drafting I thought I'd see if anyone has found a pattern I haven't.
Thanks
Lorraine
----------------------------------------------------------------------
Date: Sat, 29 Nov 1997 10:39:32 -0500 (EST)
Subject: Bernina 801 and 802
Janell--
Tried to e-mail you but it bounced back. Here's the info
As of two weeks ago, the 801 ($399) and the 802 ($349) were still at
Charon Fabrics
700 Hiway 63 South
Rolla, Missouri 65401
Their phone number is (314) 364-5087.
Good Luck...... Mary
----------------------------------------------------------------------
Date: Sat, 29 Nov 1997 16:52:42 -0800
Subject: Re: upgrade my 006 to 2000DCE?
Hi!
For me there is no contest. The $1699 price is really good for a
2000DCE. They list for $2099 and are well worth it. They are much
easier to thread and the tension is much easier to adjust. I don't sew
on mine much, but everytime I take it out, it works without playing with
the tension. If one of the tension dials gets moved, the tension can be
returned to normal just by turning the dial all the way down and then
back up. The cover stitch is a great option also which the 006 doesn't
have. Also the tension releases when the foot is up and the foot swings
out of the way when you want to change needles.
Rebecca
----------------------------------------------------------------------
Date: Sat, 29 Nov 1997 18:16:08 -0800 (PST)
Subject: Re: upgrade my 006 to 2000DCE?
I just got a 2500DCE from my dealer for $1499; he's still got them on sale
at that price - Salem Sew & Vac in Salem, Oregon (503) 362-8523. You
probably can do better if you check around.
----------------------------------------------------------------------
Date: Sat, 29 Nov 1997 20:30:35 -0500 (EST)
Subject: Re: upgrade my 006 to 2000DCE?
I'd go for the 2000DCE at that price. Once you learn how to convert the
machine over from overlock to cover, it's really not a big deal. For the
$500 difference in price, I'd go for the less expensive demo. Just my .02
worth.
ellen
----------------------------------------------------------------------
Date: Sat, 29 Nov 1997 17:57:07 -0500 (EST)
Subject: 1630 for sale
I am selling in my 1630 for a down-payment on the Artista (180).
My 1630 is a little over a year old has all the updates, several extra feet
in addition to all the originals, part of the 1630 library, video, four keys
- - "Help", "Holidays", "Hearts & Flowers" and "Borders". Two dozen bobbins
and the 5mm stitch-plate. Best reasonably offer - If interested e-mail me
privately:
Sincerely,
Suzanne
----------------------------------------------------------------------
Date: Sat, 29 Nov 1997 17:49:40 -0500 (EST)
Subject: Re: Artista 180 Embroidery Box
Just picked up my Artista Wednesday; I haven't really used it due to the
Thanksgiving holiday. I'm not happy with the "box" that the embroidery unit
comes in. This "box" is two styrofoam pieces around the embroidery unit.
You then put a piece of cardboard with a handle over the styrofoam. Now,
I'm going to be taking the embroidery unit into the store for the embroidery
club. How long will this "box" last? (I'm betting no more than 4 months
before the styrofoam is crushed.) This "box" may be adequate for shipping
the unit to the store, but it does not look adequate for us to transport the
unit for classes on a regular basis.
Does anyone know whether BOA is designing a sturdier carrying case for the
embroidery unit? Has anyone found a suitable replacement box for the "box"
which BOA provided us?? It would be nice to find something to (1) hold the
unit pieces and (2) store the cards as we buy them.
Micki
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
World Wide Quilting Page * Bernina Page