Bernina Fan Club Archives
December 95
Sunday, December 3rd - Saturday, December 9th
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Sun, 3 Dec 95 04:37:00 UTC 0000
Subject: Re: I'm Curious
Nancy,
this is coming from my memory, as I am upstairs and the info is down, but
you set your feather stitch on your machine, move your tension up to 7 or
8...hit the balance button 2 times on the + side......
put invisible thread in the the needle, and the color you want the thread to
look for hand quilting in the bobbin, what happens is the little dot that
the bobbin thread becomes a little more pronounced and the invisible thread
isn't seen unless you look closely, then tension pulls the bobbin thread
thru to the top......
good luck,
Patches
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Sun, 3 Dec 95 04:36:00 UTC 0000
Subject: Thanks &I have decided
Sue,
ooooooh, I am so excited, I can answer your questions......and Congrats on
the decision for the serger, I am sure you will use it far more than you
ever imagined......
As for the cutting mat, Dritz offers a mat that is 30 x 36, I find this a
sufficient size for cutting my clothing patterns.......The mat usually runs
around $25.00 but JoAnns will run ads for as much as 1/2 off, want my rain
check for one......
I use weights instead of pins to pin my patterns to fabric, this way, the
only pins that go into the pattern are the one that I check the grain for,
and then I just surround the weights, (these are little square drapery
weights that I picked up from a store in Altoona, Pa, but am sure any
drapery/fabric store would carry them, after I have cut around the pattern
with the cutter, I then mark it, before I move the pattern from table and
cut the rest out, the pins from the grain are still there, so that holds the
pattern piece in place enough for me to mark darts, or notches, or other
things that I deem important........
Some people, use the smaller cutter for cutting curves, such as sleeves, but
I have never used that small cutter, the first things I ever cut out with
the cutter was clothing, and not quilts so getting the curve just took a
little practice......good luck, and your also correct, the mat you have will
be big enough for baby clothing.
I am so happy, I could finally answer a question for you......
Patches
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Sun, 03 Dec 1995 07:06:27 EST
Subject: Sew Beautiful 1-800
Hello Linda!
The # for Sew Beautiful is 1-800-547-4176.
If you would like to see a catalog that sells accessories and
patterns for the dolls, call (615)661-5454. The name of their
company is TLC Doll and their catalog is $4. They sell patterns from
many different designers.
There is also a place called Linda's Silver Needle...she has a free
newsletter that highlights different doll patterns that she has on
sale each month. Her # is 1-800-766-2548. She will send the
newsletter free for 6 months. As long as you place an order every 6
months, you stay on the mailing list.
Hope this info helps you...Have a Nice Day :) TTYL-Donna
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Sun, 3 Dec 1995 09:10:31 -0500
Subject: Re: Applique
Preethi:
I don't know what model of Bernina you own, so I will explain a satin stitch
setting for both the mechanical and the computer machines. On the mechanical
machine, turn the stitch length knob clockwise until it won't turn any more.
The mark should be at the 12 o'clock position which is at 0 - in other
words, you would stitch in the same spot and not move forward at all. Now
turn the knob counterclockwise until the mark points straight down (6 o'clock
position). This is the basic satin stitch setting. Test it and adjust by
moving the mark toward 7 o'clock to tighten or toward 5 o'clock to loosen.
Satin stitches should lay next to each other. It is too tight if they are on
top of each other or too loose if there is a space between the stitches. This
will vary depending on the fabric and thread being used. On the computer
machines, the basic setting is between 0 and 1/2 at the |||. To adjust, use
the balance function (plus is further apart and minus is closer together. On
the 1630 use the vertical balance (arrows going away from each other is a
longer length and arrows pointing toward each other is a shorter length). I
hope that this explanation is helpful.
Francyne
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Sun, 3 Dec 1995 10:19:04 -0500
Subject: Re: Bernina Digest 11/30/95
To Preethi: Glad you got to Mary Jo's. It is great with all kinds of fabric
and great prices. I just called them this week to get a couple yards of a
Kaufman fabric from last Christmas. They sold the last two yards the day
before I called. 8-(. I finally found it a Keepsake Quilts, but with a blue
background instead of black. BTW you can reach Mary Jos by 1-800-MaryJos.
My good friend lives about 1 1/2 blocks from that Cloth Store. Its great to
visit her for more than one reason.
Sharon
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Sun, 3 Dec 1995 11:57:34 -0500 (EST)
Subject: Re: Thanks &I have decided
Dear Sue: I use my rotary cutter to cut out clothing pieces for the
long, more or less straight, cuts as in side seams, slack seams, etc. My
padded work/pressing board is large--37"x55". I lay out the fabric and
pattern pieces, slip my narrow cutting mat under the seam edge and cut,
marking with my finger (not in line with the cutter, of course) where the
end of the mat is. When I reach the end of the mat, I move the mat
upward and continue cutting. I also go around curves with the cutter if
it's convenient. No problem really. I pin the pattern pieces about 3"
away from the edges where I want to be able to rotary-cut by stabbing
pins vertically into the padded board. It is padded with a double layer
of blanket and covered with muslin. It is my all-purpose layout board,
ironing surface, etc. It is set up all the time, though it rests on top
of two bookcases and could be dismantled easily. Also, I have three mats
but it's the 7 x 18 that I use for this cutting purpose. Congratulations
on the expected baby. Also the new member of the family--the 2000DCE.
Myra
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Sun, 3 Dec 1995 13:49:25 -0500
Subject: mention the Bernina fan club to AG
After reading that some of the dolls were backordered from Pleasant Company I
was concerned. My mother had asked my daughter which one she wanted, and said
she would order it for her. I called Pleasant and asked about backorders, and
yes, the doll we wanted was backordered, but only until the 16th. My mother
hadn't placed the order yet, (they checked for me) I am hoping she does soon,
but I can't think of a polite way to tell her. In the meantime, I remember
last year that she had me order one for my daughter, and I did so about 5
days before Christmas, and it came two days later. We live in Illinois and
they are in Wisconsin. So I am not as worried as I would be with another
company. I mentioned that we are discussing them on the internet, in a
positive fashion, and the lady seemed thrilled. She said she couldn't yet use
the internet as even AOL would be a long distance call for her.
So don't worry too much, and yes call and ask for a refund of the rush
shipping fee.
RobbiE
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Sun, 03 Dec 1995 12:22:51 PST
Subject: Re: Thanks &I have decided
I also use pattern weights instead of pins when cutting out paper patterns.
Instead of buying weights, however, I filled 35 mm film cannisters with
small nails bought in bulk from the hardware megawarehouse. Much cheaper.
This tip originally came from a reader of Threads Magazine, I believe.
Sandy W
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Sun, 3 Dec 1995 16:42:35 -0500
Subject: Re: deco pricing
That is an excellent price. I bought one for $1699 and was told they had
misquoted to our club but would let us have it for that price. I think not
on sale they run $2099. I really like using it. I would not have bought my
1630 when they first became available had I known they were coming out with
an embroidiary machine. I bought one of the original 1630's which had
problems and even though it was sent to Chicago for fixing, the tension does
not keep well for the embroidiary cards that you use with it. Also they only
do outlining not the true embroidiary like the Deco.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Sun, 3 Dec 1995 16:44:24 -0500
Subject: Re: I have some questions...
The 1230's and 1630's do use the same feet. But if you have a 1630 you can
also buy the feet with an eye in order to make the wider stitches that the
1630 can do.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Sun, 03 Dec 95 16:50:41 EST
Subject: Re: Bernina Digest 12/2/95
Patches the challenge sounds like fun. Are you going to head it up?
Count me in if it is worked out. Dottie
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Sun, 3 Dec 1995 16:56:56 -0500
Subject: Re: Bernina Challange
sounds like fun, but after Christmas.
Jan
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Sun, 03 Dec 1995 19:17:43 EST
Subject: Bernina Challange
i"m interested. so far i've been lurking here but i'd like to try the
challange.
maria
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Sun, 3 Dec 1995 19:23:04 -0500
Subject: Re: Bernina Digest 12/2/95
Hi Sue,
I just got my Studio up and running shortly before Thanksgiving. I have a
great DH also. I have a fold-up cheapy ($25.00) table I bought on sale at
Heilig Myers placed next to the ping-pong table we bought for family visits 2
xs/year and doubles as a design wall (1/2 upright against the wall), cutting,
planning, sewing table with masonite on the flat surface to protect the
ping-pong surface. We go to get the masonite today. Anyway I have a
relatively smaller mat and I just slide the mat under the fabric and pattern
for rotary cutting. I have never been able to rotary cut patterns other than
straight edges for clothing. I quilt mostly, but do make baby grandson
clothes now that I have my first two under a year.
Hope that helps with the mat size. I just bought a lazy susan cutting holder
for a smaller mat this fall. I am asking my daughter for the mat for my
birthday 12-27. I always found it a gyp to have a birthday so close to
Christmas, but I have trained my nuclear family to pay attention to this
slight and rectify it for the rest of my life. They are good people.
Enjoy that baby.
Sharon
To Peggy: Can't wait to see this Pooh.
Sharon
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Sun, 3 Dec 1995 19:36:30 MDT
Subject: Re: Bernina Challange, Salt Lake City Gingerbread house!
A great idea! It would give everyone the chance to learn something
about their machines. And those that know the technique or idea can be
available to explain how they get the proper results. Why not start by
requesting submittals for uncommon techniques or stitches. Compile a
list of those techniques and group them somehow. Then every two weeks
or week (I hope I have time for a new lesson each week!) The chosen
technique is explained, questions are asked and answered and everyone
gets educated. This may be more fun than just reading about price
comparisons, and Europro Irons <-- my wife says I'll be dead before I
get one. ps. I paid 2999 for my 1630, brand smacking new, never seen
the light of day since it was boxed in Europe. That was after my
dealer agreed to take back the sewing conference model that couldn't
remember when a 9mm or 5mm foot was attached. Unfortunately, now I am
so busy at work... I'll plug that in a minute... that I have turned my
$100/month baby on once since I brought it home.
If any of you are LDS (Mormon) or have occasion to see the "Church
News" which is an added section of the Sunday News in some cities,
please check out the issue due out Saturday, Dec. 9th. My colleague
and I who run the bakery at the Joseph Smith Memorial Building in Salt
Lake City--what used to be the Hotel Utah--conceived, designed, built,
and decorated a 9 foot by 6 foot scale gingerbread model of Brigham
Young's Beehive House and Lion House. This weeks issue will have an
article explaining how we managed to do it. We wanted to do something
to celebrate Utah's Centennial and chose to model these buildings
because it was from them that Brigham Young, who was the first
Territorial Governor of the Utah territory, ran the burdgeoning
state-to-be. If you are planning to be in Salt Lake this coming year,
please stop downtown and see the Gingerbread house at the Smith
Building until January 31st. After that date, it will go on display in
the real Beehive house for the rest of the year.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Subject: Re: Bernina Challange
Date: Sun, 3 Dec 1995 19:01:06 -0800 (PST)
What a great idea! I go tomorrow night to my first Bernina
class (although I've had my machine for almost a month &
made several pieces of clothing &curtains on it) and I can
hardly wait for the instructor to give me ideas: this would be
a great way to experiment with those new ideas! (since doing
anything *too* creative between now &Christmas is pretty
much out of the question)
Anyone else want to do this?
Debra
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Sun, 3 Dec 1995 19:22:55 -0800
Subject: Options for other than a foot pedal
Hello. My wife just had foot surgery on her right foot. she will be in a no
weight bearing cast for 8-12 weeks. It happens to be her right foot. Do you or
anyone in the Bernina group know of an option for other than a foot pedal to
control the sewing machine. We have contacted three locations in the Seattel
Wash. are and they do not know of any products. My wife would really like to
use her 1130 during her recovery. Any info would really help.
Thanks in advance to anyone with info.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Sun, 3 Dec 1995 23:37:57 -0500
Subject: Applique
Hi all,
I have used the method mentioned of cutting away the wonder-under and leaving
a 1/4" at the edge of the applique. While it does work, it did change the
color of the applique fabric where the fusible web was at. Because of that,
I would do a test sample before I did it on a large item. Heat-n-bond Lite
and Fine Fuse are lighter weight so the appliques are some softer, but they
must be stitched around as the edges are not stuck down as well or as strong.
I guess you give up something to get the softeness.
Barbara
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Mon, 4 Dec 1995 07:35:07 -0400
Subject: Re: Thanks &I have decided
>
>Dear Sue: I use my rotary cutter to cut out clothing pieces for the
>long, more or less straight, cuts as in side seams, slack seams, etc. My
>...
Myra
HI! My name is Milagros. Regarding
Rotary cutter, I beleive they are a blessing for lefties (MUA). I do ALL
my cutting with it. It does'nt matter how narrow, small, curve, I can do
it. I have the small and the medium, prefer the small for control. Trust
I had try any gadget available for cutting, even the electric cordless
one, that unfortunately DO NOT WORK FOR LEFTIES. So thanks to quilter we
know about this fabulous gadget. What can I tell .... I LOVE GADGETS, if
there is one almost sure I had tried it. I volunteer at the University
with the sewing classes and the most popular class is the one I
demonstrate the lastest gadget I have.
By the way I own a Bernina 940 Favorit and a Bernette 730. Well this is
my 2 cents. Love the list, take care you all.
Milagros
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Mon, 4 Dec 1995 08:07:13 -0500
Subject: Circle maker
Someone said that you could not use the circle maker on the 1630. This is
probably true if you are talking about one made before that machine. However,
I have seen the 1630 circle maker and it will fit the 1630 and all machines
below it.
Mary M
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Mon, 04 Dec 1995 09:32:51 CST
Subject: RE: Rotary cutters and Clothing
Sue,
Yes I use my Rotary cutters for cutting out ALL the clothing I sew. (Which
even included multiple layers of the same size when I made theatre costumes
and bridal dresses a few years ago.) I used to sew for friends and others
when I was at home with pre-schoolers. It was a great source of extra income,
and used one of my favorite hobbies, yet it burned me out by the time I stopped.
(I didn't want to do any clothing for a good while!!) ANY way - I cut everything
out with rotary cutters. I started with a small mat about 8x24. I would pine
(oops - I mean PIN!) by pattern down, then slide the mat around under the
fabric as I cut. I could feel the edge of the mat ahead of where I cut, and
then just slid it up to the next line of cutting. I used one of those fold-out
cardboard cutting boards to protect my dining table. Then I graduated to a
large 36x40 and a cutting table with all my projects and sewing for others.
I love using rotary cutters to cut things out. If you have small curves, you
may want to use a small rotary cutter to cut them. Otherwise I use my Large
cutter. Have fun. I love sewing baby things. They don't take much fabric and
go together so quickly with their little seams!!
By the way, I am no longer Burned OUT - and I only sew for my family and self
now - (when I am not working here in the Computer center!!) And I love sewing
again. I think this group has helped, too!! I just love reading this, esp.
since I rarely get to Bernina Club here. Thanks so much SUE!!
We appreciate YOU!!
Happy Holidays to all!!
Lyn
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Mon, 4 Dec 95 09:35 CST
Subject: Re: Bernina Challange
Patches - this sounds like fun! Are you volunteering to get
it going?
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Mon, 4 Dec 1995 08:31:47 -0800
Subject: Re: Clotilde
Just my two cents but I have had many problems with Clotilde too. They
offered me a 50% discount on any one item I ordered. The item I chose to
discount was backordered, never came in and they refunded my money after 60
days (without contacting me first). When I asked to have something else to
be discounted, they said the offer wasnt good anymore! Almost every
shipment after that was missing something, which they promised to replace
with the next order, and they never do. So I have paid for 3 items now that
have never arrived, and probably never will. I have had it with them and
they will get no more of my business! The so called discounts do not make
up for the missing items in the shipments, I haven't even broken even. I
would have done better to buy at the local fabric store full price with all
the hassles anyway.
Erin
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Mon, 4 Dec 95 10:39:49 PST
Subject: American Girl Dolls and Online Chats
I ordered an American Girl doll for my mom, who bought herself a Samantha.
They were out of all the Bitty Baby dolls, backordered until 12/20. The
woman said that she had a good deal of confidence that they would come in,
and that American Girl would ship fastest way at their own expense so kids
could get their dolls before the holiday. I figured my mom could
experience delayed gratification if necessary :).
Anyway, I told her about the online chats and she was thrilled, as Robbie
pointed out. I mentioned that I was ordering the hairbrush for the
Samantha doll because of an online comment....
Jane
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Mon, 04 Dec 1995 13:02:20 EST
Subject: Bernina Challange
Patches:
The Bernina Challange project sounds like fun. I'm interested.
Lorna
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Mon, 4 Dec 1995 10:13:44 -0800 (PST)
Subject: Re: Option for other than a foot pedal
Has she tried sewing with her left foot? If your machine has a knee lift
(my 1530 does), it makes life a whole lot easier if you use your right
knee to operate the knee lift, and your left foot to sew. Now it does
take a bit of getting used to (even if you're left-handed, like me:-)),
but it works great...I hope you find this information useful, and may she
have a sppedy recovery.
Helen
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Mon, 4 Dec 1995 13:18:10 -0500
Subject: Re: Option for other than a foot pedal
She could use her left foot.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Subject: Re: Bernina Challange
Date: Mon, 04 Dec 95 13:18:00 EST
I would like to do it as well.
Carol
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Mon, 4 Dec 95 13:48 CST
Subject: Re: Option for other than a foot pedal
Your wife should be able to use the left foot with no
problems - in fact, that's what many of us "right-footed"
people do anyway, so that we can control the knee-lift
easier with the right leg.
If she's able, have her give that a try.
P.S. I also knew a wonderful lady who couldn't use her foot
pedal because of a cancer-related problem. It was
difficult, but she managed to sew and quilt using the foot
pedal in her hand! Where there's a will there's a way!
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Mon, 04 Dec 1995 14:03:42 CST
Subject: RE:Options other than a foot pedal
Christina,
Hope your recovery goes well. The only suggestion I have is to "drive" with
your left foot. My Bernina dealer suggested it when I got my 1130, so that
operating the knee lift with your right leg and the pedal with your left makes
a more efficient method. Anyway I learned to "drive" with my left and now
it seems strange to not use my left. Hope this will help!!
Lyn
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Mon, 4 Dec 1995 13:33:26 -0700 (MST)
Subject: SEW BEAUTIFUL info
Donna, tried to e-mail you but the message was kicked back twice. So, thank
you for the information and will contact Linda Silver Needle for the
newsletter on different doll patterns. Also, my AG doll and accessories are
on backorder until 16 December. I hope they come through because there will
be one unhappy 10 year old on Xmas if the backorder doesn't make it here.
Anyway, thank you for the information. Linda
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: 04 Dec 95 15:37:02 EST
Subject: Bernina Digest 12/3/95
To Christine R
Hope you are recovering rapidly from your foot surgery. I don't know of
anything simple to make your machine run other than a foot pedal - but why don't
you just use it with your left foot? It really isn't as bad as trying to write
with your "other" hand!
The other option would be to find an old machine cabinet that has a knee lever
that makes it go. You may have to do "surgery" on the cabinet to make your
Bernina fit - but attach the foot pedal just in the pocket along side the knee
lever and when you press it, it will push down the foot pedal. Make sense? Of
course, you couldn't use the 1130 knee lift at the same time. If you find one
of these old cabinets and look at it carefully - you will probably see how this
would work.
Sue Y
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: 04 Dec 95 15:32:56 EST
Subject: Bernina Digest 12/2/95
To Kay D
I tried the http// address you posted for the Martha Pullen page and my computer
says no such address. Would you please repost that so I can chech again?
Thanks.
Sue Y
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Subject: Re: Option for other than a foot pedal
Date: Mon, 4 Dec 1995 16:47:51 -0500 (EST)
When I had heel surgery, and couldn't tolerate any weight on it, I used
my left foot, and was pleasantly surprised at how I managed to use
it...Motivation is the best teacher!
Good luck,
Beth
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Subject: Re: Option for other than a foot pedal
Date: Mon, 04 Dec 95 14:35:35 PST
I was taught by my Bernina dealer to use my left foot for the pedal (so as
to free up the right leg for the knee lift). Maybe your wife could get
used to using the pedal with her left foot.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Mon, 4 Dec 1995 17:36:30 -0500
Subject: Bernina challenge
Patches,
I LOVE a challenge. Count me in but it must be after Christmas. Just went
with a friend today to pick out the fabric for the challenge for our quilt
guild for next year. Believe me, it will be a challenge. The fabrics are
great but not in the style or color range most of them normally work in.
After all, it is supposed to be a challenge.
Barbara
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Mon, 4 Dec 1995 18:34:39 -0700
Subject: Re: Bernina Challange
"Bernina Digest Challenge 1996" kind of
>thing......
>Patches
>Great idea Patches. I would like to participate!
Nancy B
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: 04 Dec 95 19:47:32 EST
Subject: Bernina Digest 12/3/95
-see if your wife can switch to her left foot to use for her sewing
machine. I find it much easier to use my left foot for the pedal and my right
knee for the knee lift. I had been sewing for 20+ years using my right foot for
the pedal and switched after reading how people do this and are able to use the
knee lift more effectively. It really works, and the switch was not difficult
at all!!! Pat
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Mon, 4 Dec 1995 20:45:06 -0500 (EST)
Subject: Challenge
I am new to this BB, but am very interested in hearing about a
Challenge. I come from a very active Quilt Guild in south Florida, and
we have fabric challenges every year. Please include me!!
Beverly S
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Mon, 4 Dec 1995 20:27:36 -0600 (CST)
Subject: Re: Option for other than a foot pedal
>Hello. My wife just had foot surgery on her right foot. she will be in a no
>weight bearing cast for 8-12 weeks. It happens to be her right foot. Do you or
>anyone in the Bernina group know of an option for other than a foot pedal to
>control the sewing machine. We have contacted three locations in the Seattel
>Wash. are and they do not know of any products. My wife would really like to
>use her 1130 during her recovery. Any info would really help.
Lots of seamstresses use their left foot for the foot pedal and the right
knee for the kneelift--tell her to give that a try!
Jacque
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Mon, 4 Dec 1995 19:52:13 -0800 (PST)
Subject: Re: Option for other than a foot pedal
>
>Hello. My wife just had foot surgery on her right foot. she will be in a no
>weight bearing cast for 8-12 weeks. It happens to be her right foot. Do you or
>anyone in the Bernina group know of an option for other than a foot pedal to
>control the sewing machine. We have contacted three locations in the Seattel
>Wash. are and they do not know of any products. My wife would really like to
>use her 1130 during her recovery. Any info would really help.
>
How about trying the left foot? I use my left foot all the time because
this frees up my right knee to operate the Bernina knee lift. It took a
little while to get used to but, now I don't even think about it.
Lynn
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Mon, 4 Dec 1995 20:12:13 -0800 (PST)
Subject: Re: Thanks &I have decided
Sue,
I cut _everything_ with a rotary cutter. I have a mat that is 40 x 72
inches. It is from a company called SewFit in Illinois. Their number is:
1-800-547-4639.
They offer a "rotary" mat and a "pinable" mat. I'm not sure what the
difference is. I bought mine 6 years ago; it's not as soft or flexible as
the green Olfa mats. But, on the other hand,it cost a lot less.
Lynn
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Mon, 4 Dec 1995 23:15:02 -0500 (EST)
Subject: Re: Options other than a foot pedal
Once, when I had foot surgery, I taped the foot pedal to the side of my
machine with duct tape and used my knee to press it. I left it there
until I ran out of duct tape, replacing it, and was too lazy plus kept
forgetting to get more duct tape, so returned it to the floor. But...it
did work great taped to the leg of my sewing cabinet.
Peggy K
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Mon, 4 Dec 1995 20:12:24 -0800 (PST)
Subject: Thanks to all re rotary mats/cutters
Thanks to everyone's advice about a while back about rotary cutters and
mats. I finally called Atlanta Thread and my two Olfa self-healing mats and
two different sized Olfa cutters arrived last week (it was the second time I
had ordered from Atlanta Thread and was again VERY pleased with the
speed/service).
I LOVE THOSE MATS!!!!! My prior experience with rotary cutters was many
years ago and not positive. But THIS time is SOOOOOO different and I
attribute that to the mats. I cut out a wool gabardine shirt/jacket so fast
it made my head spin and I had no problem controlling it around the corners.
I DO like the smaller one for tighter curves.
I can't wait until I try my next PolarTec project....it oughta be a breeze
to cut!
By the way, if anyone is in the Puget Sound area, I visited Famous Label
Fabrics Outlet Store down near Tukwila, WA today (it's a bit of a drive from
Everett) and I was very pleased! It's been so long since I felt like I was
in a REAL fabric store instead of a craft store carrying a few bolts of
fabrics! I bought enough stuff to whip up during my quarter break coming up
so I'll actually have some decent work clothes for winter quarter!
If anyone else out there is on the brink of going for mats and rotary
cutters: GO FOR IT! You won't regret it!
Louise
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Mon, 4 Dec 1995 23:50:49 -0500
Subject: Re: Option for other than a foot pedal
I fractured my right ankle last year and was in a cast for six weeks. No
weight on it the first three weeks, at all. I really found it not too
difficult to sew w/the left foot. My steno chair both at home and the office
became a mode of transportation. The guys at work threatened to put one of
those backup beepers on my chair. I got really got good at scooting around
backwards and pretty speedy too.
Jan
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Tue, 5 Dec 1995 01:33:27 -0500
Subject: Re: Bernina Challange
This is great, the response to this idea has been great....I am really
excited to get this going......
I like Steve's idea that you can gather your techniques, ideas for different
uses we can do with our machine, and if you will all e-mail me with your
ideas, I will compile them and we can get this started at the new
year......I think that a new technique every two weeks is good, we can
discuss it, problems we are having, and resolve and do the project within
that time slot.
You can all be looking for a vest, or jacket pattern if you plan to do a
wearable, or you can just play along and then do a project you feel
comfortable with once you see what is happening......
I will ask that you e-mail me privately with your ideas, so that we don't
flood the board right now, and then I will put them out to you to see where
you would like to start.
ok, looks like we are a go......
Patches
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Tue, 5 Dec 1995 01:48:51 -0500
Subject: Sewing machines
Hi,
I am a confused husband trying to buy a sewing machine for my wife who
is an excellent seamstress and quilter. She is frugal and doesn't want a
machine with all the bells and whistles. She wants a standard machine with
the ability to drop the dogs for freehand quilting. I went to a Bernina
dealer and told him my plight and he suggested the Bernette 715, an all-metal
machine made in Taiwan for Bernina. He said it was a $700 machine and he
would sell it for $399, guaranteeing to buy it back within 2 years for the
sale price. I shall appreciate hearing from anyone who either owns one or has
any kind of information that would be useful. Thanks.
George
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Tue, 05 Dec 1995 06:28:24 EST
Subject: SEW BEAUTIFUL info
Hello Linda,
I ordered the AG Doll of Today the 3rd week in Sept for my daughters
birthday in Oct...the doll arrived in time, but the rest of the
things to go with it, were on backorder...that was O.K. with me
because the other items were for Christmas...I was surprised when
they didn't come until the middle of the second week in NOV though!
What things did you order? I know that most of the things that are
on backorder are the Doll of Today things and the Bitty Baby items.
I am sure if they said they'll come in time for Christmas, they will..
.They are a very good Co. By the way, the newsletter that Linda's
Silver Needle has, has mostly smocking and heirloom sewing items in
it...but it always has a page of doll patterns and accessories...I
think you'll like it. Happy Sewing! TTYL-Donna
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Tue, 5 Dec 1995 07:45:44 -0500
Subject: Sewing for others
Is anyone else out there bombarded by requests from non-sewers for "favors"?
Any good advice on how you handle it? My rule of thumb has been that I
don't sew for anyone unless it is out of love - but even that is getting
stretched to the limit - and I am constantly putting off my own projects.
Non-sewers just do not understand the time involved. At a party over the
weekend, a new neighbor who heard that I sewed, asked me to make curtains for
her. I put her off until the new year, but this is getting out of hand. I
don't have a problem saying no to strangers, but it is very difficult with
people who are in your circle. Linda
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Tue, 5 Dec 1995 12:52:05 GMT
Subject: Re: Various
SHARON, AN INDUSTRIAL MACHINE IS FASTER THAN HOME MACHINE BUT DEPENDING ON THE
VERSION PURCHASED, MAY BE VERY LIMITING. BERNINA HAS SEVERAL- THE 950 IS SEMI
INDUSTRIAL AND VERY MUCH LIKE A SPEEDY 930 WITH A WIERD BOBBIN. THE 217 GETS A
BIT COSTLY AND YOU CAN HAVE IT SET UP IN VARIOUS FORMATS.
HOLLY
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Tue, 5 Dec 1995 05:00:28 -0800
Subject: Help! Pooh
I have the Pooh pattern scanned into the computer, saved to multiple
jpg files, but I don't know how to make them avaliable to others. If
someone can tell me what to do I will be glad to share them. I thought
about e-mailing them. Peggy
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Tue, 5 Dec 1995 07:45:45 -0500
Subject: Re: Bernina Challange
Patches - Count me in also. The challenge sounds like fun. L
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Tue, 5 Dec 1995 08:55:55 -0500
Subject: Re: Option for other than a foot pedal
Can she use her left foot? A lot of us are now using our left foot instead of
the right foot because it interferes less with the knee control. Another
option would be to use her right hand to press the pedal while guiding the
fabric with the left.
Francyne
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Subject: Re: Martha Pullen Website Question
>
>I tried the http// address you posted for the Martha Pullen page and my
computer
>says no such address. Would you please repost that so I can chech again?
>Thanks.
>
>Sue Y
The web site address is:
http://www.sa.ua.edu/brent/msr.htm
Kay D
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Subject: Foot Pedal
Date: Tue, 05 Dec 95 07:16:00 PST
Subject: Options for other than a foot pedal
You were asking about an alternative to using a foot pedal for your wife's
right foot. Why not use the LEFT FOOT for the pedal? I learned this right
here on-line, and it works great. Then, if she has a knee lifter on the
right knee it won't interfere with her sewing and she can opt for not using
it with her recovering leg. Good luck on the surgery!
Also, I'd also like to participate in the Bernina Challenge (after
Christmas). One of my "wishes" for Christmas is the Advanced Guide for the
Bernina because I've only been to one class and it's really too far to go
for the Bernina Club that they offer (although I would love to, since it's a
really nice store).
Jamie
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Subject: Various comments and questions
To Patches: Count me in on the Bernina Challenge. Lately I have been in the
mood to do all sorts of creative things with vest and look forward to learning
more. It sounds like a fun idea.
I have a question concerning accessories that come with the serger. I have
lost the little serger looper threader that comes with the machine a couple of
times and that darn little thing costs $2.50 to replace. If you drop it on the
floor it is gone. It blends in with the carpet and is hard to find. Is
there any
place where I could just purchase several of the threaders at a much cheaper
price?
About Clotilde: Some people are commenting about problems with orders
from Clotilde. My experience has been positive. I have never experienced
delays and I always get my merchandize in a timely manner.
About the circle attachment: At my Bernina Club Saturday, they demonstrated
making yo yos using the circle attachment. Made me want to
purchase the attachment just for that but will wait til my dealer has a 20% off
sale.
About other machine dealers: I do not have a Bernina dealer in my town. I
have to travel 40 miles to Bernina Club so when I run out of needles I must
visit either the Pfaff dealer or the Viking dealer. Each time I go into one of
these shops these people try to sell me their machines. They both do this
by putting down Berninas. I was in the Viking shop last week to get some
needles and the lady in there went thru the sales pitch on the Viking #1+ on
how it was the greatest machine on the market with the embroidery built
right in.
About AG dolls: I have been enjoying reading all the posts about the dolls.
I am going to get the dolls for my girls but will wait til they are older
and will
appreciate them more but I may go ahead and get the dolls so I can start
sewing the clothes now. One thing for sure that I have learned from everyone
is that I won't wait til December to order and take a chance of not getting
it in time for Christmas. Also, I appreicate the warning about the McCalls
and Simplicity doll pattern clothes. I was not aware that they might not fit.
Merry Christmas,
Kay D
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Tue, 5 Dec 1995 09:19:49 -0500
Subject: Re: Thanks &I have decided
Patches wrote to Sue:
>As for the cutting mat, Dritz offers a mat that is 30 x 36, I find this a
>sufficient size for cutting my clothing patterns.......The mat usually runs
>around $25.00 but JoAnns will run ads for as much as 1/2 off, want my rain
>check for one......
I picked up a 36 x 36 from JoAnns about six months ago for an incredible $18.
>
>I use weights instead of pins to pin my patterns to fabric, this way, the
>only pins that go into the pattern are the one that I check the grain for,
>and then I just surround the weights, (these are little square drapery
>weights that I picked up from a store in Altoona, Pa,
I use the canisters that 35mm film comes in, fill it with little lead
sinkers you can get in the fishing department, or when I catch my son with
them, bee-bees! They are small enough to get into corners, but sometimes
they are a little tall. I have been known to go to the kitchen and use
tuna cans! Gotta do all these little tricks so that I can get than extra
yard of fabric.
************
Peggy Q
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Tue, 5 Dec 1995 08:22:22 -0600 (CST)
Subject: Cheap ribbon
I am in the midst of planning two weddings next summer. Does anyone know
of a cheap source for ribbons to make pew bow? I'm looking for 2 3/4"
eggshell moire ribbon. I've heard you can cut fabric strips and serge
wire to the edges to make ribbon. Has anyone tried this?
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Tue, 5 Dec 1995 09:55:55 EST
Subject: Great place to visit!
Hi everyone!
I've been a reader for some months now and have enjoyed the
discussions immensely. Our local Bernina dealer closed a year ago
and we lost a great inspirational sewing meeting place. This chat line
is like an electronic replacement.
I just got back from a weekend sewing jag with my sister in
Birmingham, AL. We were working on a few Christmas sewing projects,
so we had plenty on hand to do. We didn't need anything else.
However, she took me to a great quilt shop in Center Point which is
only a few miles northeast of the city. And, guess what? We came
out with full bags, lighter wallets, and big smiles on our faces!
The shop was pure delight. It was beautifully arranged and even with
the tons of available fabrics, it wasn't cluttered or jammed. They
had a wonderful assortment of patterns for doing everything from
stuffed Santas to sweatshirt appliques, and there were lots of great
samples. There was a quilting bookshelf that made you want to sit
down and read! My sister is the quilter and I'm into wearable art,
but for the first time, I saw a quilt that I said I would like to
make. And, I just may. This shop publishes a quarterly schedule of
classes that covers skill building techniques (applique and machine
quilting) as well as projects such as making quilts, banners,
placemats, clothing borders, and more. Annie Woods in the owner and
the shop address and location is:
Quiltmakers Workshop
Center Point Plaza
2403 FIrst Street NE
Birmingham, AL 35215
205-854-4485
If you are in the area, enjoy!
Mary S.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Tue, 05 Dec 1995 08:15:16 -0800
Subject: Re: Martha Pullen Website Question
Sue Y writes...
>I tried the http// address you posted for the Martha Pullen page and my
>computer says no such address. Would you please repost that so I can
>check again?
>Thanks.
The http address originally posted for the Martha Pullen site was
correct. It is http://www.sa.ua.edu/brent/msr.htm
If that fails, try searching for "Martha Pullen" (without the quote
marks). Your computer should find it one way or the other.
Pat M.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Tue, 05 Dec 1995 17:07 -0800 (PST)
Subject: 100 needles
Hello... someone post the Sunbrand 1-800-228-7550 as selling
100 schmetz needles for $15.00 earlier, and I tried to call
that number which turn to be a fax number. Would you post
the phone number if possible? I did try to fax my request
but nothing return to me yet after three days...............
TIA........-Esther
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Tue, 5 Dec 1995 21:34:46 -0500
Subject: Rotary Cutter
Thanks everyone for the tip to use the small rotary for control. I never
thought of that. I'm going to try it on my daughter's Christmas vest I am
about to cut out. Thanks.
Sharon in TN
To Erin: Try Pine Tree Catalog, good prices, good service. I like them.
Sharon
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: 05 Dec 95 22:12:03 EST
Subject: Bernina Digest 12/4/95
Judy - You are very welcome!!
Peggy - I, too, would be interested in the Winnie the Pooh pattern (and your
list keeps growing.....)
Patches - The challenge sounds like fun!
Chris
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Tue, 05 Dec 1995 20:40:18 MST
Subject: RE: Sewing for others
I know the feeling! I do not mind sometimes...for instance I just made
a cape for my niece....it was a birthday present from her mother. Her
mom (my sister gave me a deposit on account to pay for fabric, lining
etc.) and when I was done, I submitted an account of how I spent her
money...she had a $10 credit...I shipped the cape of and my sister
sent me another cheque for $60.00 for my 'labour'....I did not expect
to be paid for this job...but my sister insists that as she knows how
much work goes into things, I should not be expected to do it for nothing...
but I will not sew for freeloaders...when people at work or neighbours
ask me to 'do them favours' I simply say that although I would love to
be in a position to accommodate them, unfortunately I do not have the time
and them offer to give the names/phone numbers of some excellent
seamstresses who are in the business of custom sewing. They seem to
be happy enough with this response although it is funny how soon the
project is forgotten...some people simply do not want to pay for services
rendered...
Sandra
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Tue, 5 Dec 1995 23:22:54 -0500 (EST)
Subject: Re: Sewing for others
I began sewing for "people" because they have asked me after seeing my
work. At first, my reaction was like yours - gawd, I could never take
all that time for someone who has no appreciation for the time, etc.... I
decided that I would simply ask for a good price, and if they were
offended, so what. I was not going to sew for the heck of it. So, now
I give an estimate of $10-$15 per hour, plus materials. At that price,
especially if I have no urgent deadline, it's worth it. That price seems
to be fair in this area, and weeds out those requests where I feel they
would be taking advantage of me.
Beverly S
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Wed, 6 Dec 1995 01:14:08 -0500
Subject: Clotilde
I no longer use Clotilde either. A couple of years ago I placed an order.
After 2 weeks and I did not have it I called to find out when it was
shipped. The person said it hadn't gone out yet trouble with the credit
card (I have never had trouble before and it is paid in full each month so I
didn't understand this) She also said when the order was placed the
computers were down (stock answer to everything). She was short and
unfriendly. I did get my order in 4 days after this so I don't know what
their problem was. One of the items was on back order and it took 3 months
(!) to get to me. That was enough for me -- I have found Nancy's Notions to
be unbelievably friendly and fast -- they ship by air. They have answered
any question I have had and don't act like they just can't take time for me.
Unfortunatly they don't carry some things I see in the Clotilde catolog I
would like but I will not order from Clotilde. Plus the last catolog I got
had wooden benches/tables carved in Asia what has that got to do with
sewing?
Esther
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Wed, 6 Dec 1995 08:13:43 -0500
Subject: drive with your elbow
When we first got married our dining table was a chinzy glass thing, so I put
my sewing machine on a coffee table and used my elbow to run it.
About those SewFit mats. I have one, not the pinnable, the harder one. I
don't like the soft type mats like the Dritz, because they don't heal, and
you end up ruining them quickly. My SewFit mat was bought for $12 on sale, 6
years ago, and I just replaced it with a $42 Olfa mat a few months ago. Of
course I didn't pay full price for the Olfa either....
I finished stitching a log cabin quilt in the ditch. Because the blocks were
more diamond than square, Iused a few odd techniques. First, I can't free
motion in a straight line. So I used my #10 foot (topstitching) and let the
blade run along the seam. I used the straight stitch plate. I have a 1630, so
I was able to use the needle down feature, and leave the cursor on the
forward and reverse button, this let me "feel" for the button and switch back
and forth. I wanted to be very careful because I was not using clear thread.
I sure need more practise! Debra Wagner sure deserves those awards, I tell
you.
RobbiE
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Wed, 6 Dec 95 04:59:27 -0800
Subject: American Girl dolls again
With all this talk of American Girl dolls, I'm wondering if any of
you knows the AG mailing list address? I saw it mentioned on
misc.kids that there is an email list for AG dolls but I can't seem
to find out the address.
Thanks for the tips about sewing for AG dolls using the big four
pattern company patterns. I'm about to make my first outfit using a
Vogue pattern and I now know to doublecheck the size of the wrist and
ankle cuffs.
Sharon Z
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Subject: Re: Bernina Digest 12/4/95
Date: 06 Dec 95 07:25:34 -0600
>
> >
> >Hello. My wife just had foot surgery on her right foot. she will be in a no
> >weight bearing cast for 8-12 weeks. It happens to be her right foot. Do you
or
> >anyone in the Bernina group know of an option for other than a foot pedal to
> >control the sewing machine. We have contacted three locations in the Seattel
> >Wash. are and they do not know of any products. My wife would really like to
> >use her 1130 during her recovery. Any info would really help.
> >
I learned to sew on an ELNA with a knee control instead of a foot
control. On all my mother's subsequent machines she had the dealer
mount the foot control to the inside of the sewing cabinet and attach a
bar, whichswung down for use and up for storage, to the foot pedal and
we sewed by pressing on the bar with the right knee. I'm sure something
like this could be rigged up if she doesn't want to sew with her left
foot.
Terri
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Subject: Re: Sewing for others
Linda,
I have always made it clear that I would be glad to sew for someone at
the rate of x $ per hour (right now, it's $15.). If you value your time,
and put a price on it, people get the message. Find out the going rate for
these services, and set your "fee" accordingly. You can pick up extra cash
if you really want to, and not feel taken advantage of, because you are
asking a fair price. My family, is another matter, and over the
years, I HAVE sewn alot for them, but their appreciation for my quality
work is thanks enough.
Beth
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: 6 Dec 95 9:23:36 EST
Subject: Re: Bernina Digest 12/4/95
Hi! This is my first posting to this group and I hope it goes through. I, too,
love sewing gadgets and have some of my mother's from the 40s. Some of them
even work with my Bernina 1090s! I made my first quilt (a Double Irish Chain)
when I first found out about rotary cutters in the early 80s and thought I had
invented strip quilting! I started teaching several women in my office how to
do it and I've given away as gifts more quilts than I have kept for myself. I
just finished a batch of patchwork pillows for a wedding gift, all wedding
themes such as Old Maid Puzzle, Batchelor's Puzzle, Wedding Ring, Cake Stand,
Wedding March, etc. They came out so nice I didn't want to give them away.
After Christmas, all my projects will be for me!
Funny, I am left-handed as well, but I've always used scissors and rotary
cutters with my right hand. Must have been too frustrated as a kid when they
didn't have left-handed scissors and forced myself to learn to use regular
ones. I "drive" my Bernina with my right foot and use my right knee for the
knee lifter. Since I never lift the presser feet while I am actually feeding
fabric through I didn't see the point in "driving" with my left foot. Am I
missing something here?
I really enjoy reading this group and have passed on several great tips to my
quilting guild. What a great group!
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Wed, 06 Dec 95 09:21:25 cdt
Subject: Re: Sewing for others
Linda wrote:
Is anyone else out there bombarded by requests from non-sewers for "favors"?
Any good advice on how you handle it?
I really beleive that the only way to deal with requests for free
sewing is to be straight. If you would do the job for money, say so.
If you really don't want to do it on any condition, say something
like, "I would love to help you out, but I just don't have time.
Making that jacket/those curtain/whatever would take me at least
20/40/60/?? hours and I would have to charge you $10.00 per hour.
Perhaps you could have it/them made by ...... (fill in the name of any
person or company who sews for money)." You're right. People don't
know what they are asking. It's your responsibility to tell them
I have made baby quilts for 14 neices and nephews, but most of them
didn't get done when the baby was born. I have learned that if you
let people take all your time, they will. You have to learn to say
"NO".
Just my $.05 (inflation).
sharon
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Wed, 06 Dec 1995 09:31:32 CST
Subject: RE: Bernina club Challenge
Patches,
What a great Idea!! But please let's start after the Holidays.
To All,
I went to my Bernina dealer's Christmas Open House last night. She
had mailed invitations that were good for a free book if you came in during
the Open House. I expected a booket of some sort - Boy was I surprised!!
It's a really nice book - softcover - "Quick Quilted Home Decor with your
BERNINA" by Jackie Dodson. It's got about 14 or 15 projects in it and retails
for 14.95 US. I am planning to do the Sampler Book sometime after Christmas.
If any of your dealers offers this - be sure to snap it up!
Lyn
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Wed, 06 Dec 1995 09:33:14 CST
Subject: RE: My previous message
CORRECTION: The book has 16 projects!
Lyn
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Wed, 6 Dec 1995 10:30:54 -0500 (EST)
Subject: Re: Sewing machines
To Wes, who is trying to select a sewing machine for his wife--
Here's what I would like in your wife's position. You say she's
frugal, and that you have been dealing with a Bernina dealer re a Bernette.
I'd give your wife a big kiss and a BIG check to buy as she wishes. I
would only specify that she spend it ALL on herself. She might not
choose a sewing machine at all. I don't know if anyone else would
recommend a Bernette without knowing more about her sewing proficiency.
If she wants to machine-quilt, she might opt for a Bernina (Swiss-made)
with a knee lift. At any rate, don't be chagrined if she spends the
check on a piece of jewelry. Having been married for 45 years, I
can say that sometimes what husbands think a wife needs doesn't
match up with what she really wants. Speaking for myself, part of the
fun of having a new major appliance is in the shopping. Good luck, and
Happy Holidays.
Myra
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Help -- am fairly new to using rotary cutters. When trying to cut around the
notches (the ^ that allow proper line ups) I have a terrible time. The
fabric doesn't always get cut through and then 'hangs' on to the rest of the
material when you go to pick up the piece you thought you had just cut out.
Do you just cut through the notch and then take a little nip into the garmet
at that spot with the siccors when it is all cut out? I have thought of this
but half the time I forget and find it a nuicence when I am sewing and
realize I don't have the notches marked.
Any suggestions would be appreciated.
Esther
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Wed, 6 Dec 1995 11:02:53 -0500
Subject: Re: Sewing machines
In a message dated 95-12-05 22:49:33 EST, you write:
> I am a confused husband trying to buy a sewing machine for my wife who
>is an excellent seamstress and quilter. She is frugal and doesn't want a
>machine with all the bells and whistles. She wants a standard machine with
>the ability to drop the dogs for freehand quilting. I went to a Bernina
>dealer and told him my plight and he suggested the Bernette 715, an
all-metal
>machine made in Taiwan for Bernina.
George,
The Bernette is an good machine, though I haven't spent a lot of time with
it, so I can't really help much there. I do know the Bernina machines (Swiss
made) a little better. I would suggest the Bernina 1000 for your wife....
it will be a bit more expensive (approximately $700) but I think in the long
run your wife will enjoy it even more than the 715. You mentioned that your
wife is a quilter..... the 1000 machine has the capability of using the
knee-lift (third-hand) that we all rave about. She will enjoy this feature!
Also, since your wife is an excellent seamstress, there would be many more
feet available for the 1000 to do special things. All of the Bernina feet
will fit this machine. I guess it could really come down to a matter of
finances.... yeah, what a bummer.... we all seem to have that problem.
Whatever you decide, you are a very sweet husband to take the time to find
your wife a nice machine.
Good luck in your decision making,
Judy
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Wed, 6 Dec 1995 11:02:48 -0500
Subject: Re: Various comments &questions
In a message dated 95-12-06 08:48:32 EST, you write:
>I have a question concerning accessories that come with the serger. I have
>lost the little serger looper threader that comes with the machine a couple
>of times and that darn little thing costs $2.50 to replace. If you drop it
on
>the floor it is gone. It blends in with the carpet and is hard to find. Is
>there any place where I could just purchase several of the threaders at a
much >cheaper price?
Kay,
I don't know if your local shop carries these in a package but you can order
them through Nancy's Notions catalog. A package of 6 is $4.65. Just in
case you don't have their phone number, it is 1-800-833-0690. Also, I have
used the dental floss thingies, but they are only good for the loopers, not
the needles. I really didn't like them as well.
>About other machine dealers: I do not have a Bernina dealer in my town. I
>have to travel 40 miles to Bernina Club so when I run out of needles I must
>visit either the Pfaff dealer or the Viking dealer. Each time I go into one
of
>these shops these people try to sell me their machines. They both do this
>by putting down Berninas.
I personally would be offended by this. I would probably tell the shop owner
(nicely) that I am very happy with my choice of machine and that if *I* ever
decided my machine was not performing as *I* wish it to, then I'll be happy
to discuss options. Until that time, please respect me enough not to put
down my machine, because they are in effect putting me down as a responsible
decision maker.
Judy
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Wed, 6 Dec 1995 11:11:36 -0500
Subject: Re: Sewing for others
Linda,
I believe Nancy Reagan said it best. Just say no. It gets easier each time,
although the first is a bit much. I once gave handmade sweaters, quilts, etc.
to family members and found I didn't have time for my own stuff. I have a
"personal policy" list of things. Number 1 on the list is no sewing for
*anyone* outside my immediate family. Immediate family = my husband, my son,
me, my granddaughter. Period. I've convinced my husband and son that the
wall hangings I make are actually for them. Self preservation rules. Maybe
part of what convinced me is that I have had radial tunnel problems. I simply
can't do as much as I once did.
Another thing I find that keeps me from doing my own stuff are some of the
classes I have taken. Probably just an idosync. on my part, but I sometimes
feel I am doing someone else's idea, pattern, whatever and then all the ideas
I have for my "own" stuff gets put off. As you may have guessed, I don't take
many classes any more, either. Just my 2 cents. Your mileage may vary.
Ida
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Wed, 06 Dec 1995 12:28:40 CST
Subject: RE: Sewing for others
Linda,
I have had the same problem -- My solution was to find others I could
recommend to them. I asked others if I could recommend them, and even
asked my Bernina dealer for names. The local Hancock Fabrics store has a
bulletin board with business cards of those who sew for the public. If I
didn't know who to recommend for their project, I tell them to call the
Bernina store or Hancock's for a recommendation. I know your frustration.
If you knew someone who was a great gourmet cook, would you ask them to fix
a simple dish for you or even a full 7 course meal at little or no pay??
And yet, this is often what others expect. Now, of course, it's different
if you decided to cook something for someone else on your own as a gift of
love. GOOD LUCK!! There's lots of ways out. You just have to start
taking them. My family is my inspiration.
Lyn
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Wed, 6 Dec 1995 11:31:21 -0500
Subject: Re: Sewing for others
a NEW neighbor asked you to make CURTAINS? That is a lot of nerve! I can't
imagine that people don't know how much work it is to make something that
costs hundreds of dollars to buy. I think you'll have to start practicing
saying something along the lines of "I wish I had the time to help you out,
but I just don't have the two/three/whatever weeks it would take." The big
problem with not saying no to loved (or liked) ones is that they keep coming
back. I lent a friend $1500 for her business and the next year she came back
for another $3000. Knowing I was never going to see the $1500 again made it
easier to say "no" to the $3000 - what a relief not to have to worry about
what excuse I was going to make in the future!
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Wed, 6 Dec 1995 10:37:37 -0800
Subject: Re: Sewing for others
It is interesting to hear your responses for home sewing. I have recently
gone from hobby to sewing as a business (as a second income, still isn't
enought to quit my day job). I also teach frequently and I am amazed at how
many organizations expect for me to teach for free. I do negotiate a small
"honorarium" from non-profit organizations, but I am always asked to do it
for free. I am teaching through my own studio now, but when I taught
through other professional studios (i.e., The Sewing Workshop in SF) my fee
was roughly $125 per hour. To teach an all-day or 2 day workshop, these
organizations are asking me to "donate" equivalent to $500-$1500!
It is still important for me to teach to non-profit groups, and I am a
member of many of the organizations who ask for my services. However, I
cannot continue to run my business when I turn around and give it away for
free to other groups. Also, I still believe that people who pay (even a
token amount) are more appreciative of the services they receive rather
than the "I'll just take that class, it's free anyway" attitude. It is no
fun for me to teach to people who do not appreciate the services I provide.
Erin
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Wed, 6 Dec 1995 10:38:38 -0800
Subject: Re: Sewing for others
>Is anyone else out there bombarded by requests from non-sewers for "favors"?
>
I feel violated sometimes by requests by certain people who have been
insinuating that I *have* to help them (fix their clothes, their furniture,
make them a shirt...) Now I just say NO. I have plenty of my own projects
sitting in the closet waiting for me, and projects for my own family and
loved ones. Since I only do one or two projects at a time, my other
projects sit in the closet crying for my attention.
I tell these often "superior" people that I'll show them how to do it
themselves. I have only had one person take me up on that offer.
~~Kathryn F
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Wed, 6 Dec 1995 14:04:39 -0500
Subject: Re: Help! Pooh
>I have the Pooh pattern scanned into the computer, saved to multiple
>jpg files, but I don't know how to make them avaliable to others. If
>someone can tell me what to do I will be glad to share them. I thought
>about e-mailing them. Peggy ddm2@ix.netcom.com
Peggy,
I wish I could help you figure that one out......don't even know what a .jpg
file is or how I would read it, so be sure to let me know.....
Did you get the post I sent for wanting this pattern, I'm not sure, I was
having some mail bounce back on genie, and so I wasn't sure.....I have
switched my e-mail address, so thought you should know.....
Patches
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Wed, 6 Dec 1995 14:12:04 -0500
Subject: ABout AOL long distance
To RobbiE:
AOL gave my friend in a rural area an 800# because the phone company was less
then interested. Wonder why $$$$!
Next time tell whoever to contact AOL and see if they can give an 800#. The
more the merrier.
Sharon
: Have your wife use her left foot on the pedal. You can retrain
with practice. I'm a leftie and use either on the foot pedal.
Sharon
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Wed, 6 Dec 1995 13:27:19 -0500
Subject: Winnie the Pooh
Peggy, I am also interested in the Winnie the Pooh pattern. Sounds great for
my new grandson! Will gladly pay postage, trade for, whatever!
Phyllis
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Wed, 6 Dec 1995 13:27:18 -0500
Subject: Bernina Challenge
Patches, Please count me in on the Bernina Challenge, after Christmas. A vest
and/or jumper would be my objective.
Thanks, Phyllis in Omaha where the snow is coming down and everything is a
white winter wonderland...till the snowplows come by!
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Wed, 6 Dec 1995 13:27:15 -0500
Subject: Sewing for others
Linda, I to had the same problem with "sewing for others"! Notice the "had"!
The way I solved it and so far it has worked, I started to tell people that I
would love to do their project but time was very tight, (as it usually is!)
and if they would want to come over when we were both free, I would set up
the machine for her and she could sew with my supervision. I would explain
that in that way I could continue with hand work while she was sewing the
project herself. Needless to say, the subject was never brought up again and
there was no hurt feelings.
Phyllis
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Wed, 6 Dec 95 10:30:27 PST
Subject: 1090 lurches along...Help!
I have a problem that perhaps you all can give me some advice about
before I got dashing off to my Bernina repair station. :-(
Suddenly my 1090 is lurching along rather than smoothly sewing. It
seems to be a power problem, perhaps in the foot control??? Has
anyone else had this problem? How was it solved?
And of course it would happen Just Before I Need It for holiday
gifts...sigh. (Fortunately the old Elna 400 is still in the
closet.)
Any comments would be terrific!
Thanks!
Judy
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Wed, 6 Dec 1995 13:00:15 -0700 (MST)
Subject: AG dolls
Donna, the AG doll I order that is on back order, yes, was the Doll of Today
and her bed. The other doll I ordered was Kirsten and several of her
accessories and none of them were on backorder. I'm expecting Kirsten and
her goodies any day now so I may complete sewing the clothes I've started
for them. The Pleasant Company told me to call of the 16th (day that they
are due) to see if they are back in stock. PRAY, PRAY, that they are. My
girls are wondering when gifts are going to be put under the tree. It's not
right to say, well, the shipment hasn't come in yet. They don't know for
sure they are getting a nice selection of AG dolls!!! Linda Silver's Needle
will be sending their catalogue soon. Happy sewing and happy wrapping all
those Xmas presents. :) Linda
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: 06 Dec 95 14:53:11 EST
Subject: Re: AG doll patterns
Just saw an ad in the back of the most recent QNM offering historically accurate
American Girl doll quilts and dress patterns. The number to call for a free
catalog is given as 1-800-507-9356. The ad says these were researched by a
costume and textile historian, and mentions years 1774-1854-1864-1904-1944. I
plan to call for a catalog and thought others here might be interested.
Mary
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: 06 Dec 95 16:24:09 EST
Subject: Re: Winnie the Pooh
While "surfing the net" I came across the following source for the Winnie the
Pooh pattern.
She asks for $4.15 for postage and copying costs. I have not emailed her &
assume I am not doing anything wrong by relaying the information here, as she
did publish her willingness to supply patterns. Do make sure it is a full set
of all the animals, as I ran across other postings that seemed to be just for
Pooh bear and did not include Piglet. Also make sure it is the McCall's pattern
(I'm pretty sure hers is), as there is another set from a book which consists of
inferior felt-type creatures.
If my memory serves me, I found these postings in the usenet group:
rec.crafts.textiles.sewing
I will be making copies of my copy next week for those who have emailed me with
requests. If you get absolutely desperate I will add you to my list, but it's
getting close to Christmas and I am way behind in everything.......groan......It
will likely be next week before I can make copies &get to the post office.
Mary
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Wed, 6 Dec 1995 17:08:02 -0500
Subject: Saying No
To Linda in Stl, Why not ask what they can do in return for you so the time
you spend making what they want can be made up perhaps by a weeks worth of
home cooked meals for six, or a good floor waxing or two weeks worth of house
cleaning? They ought to be delighted to barter and then they get the time
idea. If not then they will probably withdraw their request and you can
smile and sew for yourself.
Sharon
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: 6 Dec 95 17:19:51 EST
Subject: circle attachment and needles
< Kay D wrote about the circle attachments and needle availability >
I have found that a thumbtack taped point-side-up on the flatbed works just as
well as the circle attachment and is considerably cheaper. Just make sure you
have a tack with a point that is long enough to hold the thickness of your
fabric (and watch your wrists). Also, you can use Schmedtt (spelling?) needles
if it is too far to go for Bernina needles, although that is probably what you
are getting at the Pfaff/Viking dealer, right? I would just ignore their
attempts to sell you one of their machines when you go in*you're happy with
your Bernina, aren't you? I had bought a top-of-the-line Elna and sold it
within a month to get the Bernina I wanted and I really like the Bernina much
better, so I tend to think smugly to myself that I have a better machine when
others try to push their brands on me.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Subject: My first class!
Date: Wed, 6 Dec 1995 14:32:58 -0800 (PST)
I went to my first (of 2) Bernina class Monday night. Pretty
exciting: I learned how to take my bobbin case out to clean;
I learned about blind hems (eek! seems incredible, but I didn't
know you could make those kinds of hems other than by hand!);
did a lapped seam on terry-cloth; &learned why not to use
cheaper thread. I also learned how to do the satin stitch for
applique--I tried making letters out of the satin stitch, too:
I spelled CAT.
Here's a question, though: I have a 1090S (it's almost a
month old) and was wondering if there were a way to do
monogramming--either in block letters (like I tried) or
in script. We haven't tried all the decorative stitches
in class yet (that comes in 2 weeks) and I want to know
everything *now*! Any help would be greatly appreciated.
And, what is a "black-case bobbin"? I kind of got the
idea that it's got a more loose tension for thicker,
decorative threads. How do you use it? Does it fit in
the spot where the regular bobbin does? Is it expensive?
Thanks,
Debra
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: 06 Dec 95 17:51:42 EST
Subject: Re: Sew Baby!
Whoever posted the Sew Baby! information, if you will email me your name &
address, I'll tell them when I place my (rather large) phone order to see if
they will send you a $3 gift certificate. (My catalog came in the mail today.)
I particularly like this catalog because it is a home business and they carry
unusual, non-run-of-the-mill patterns from small independent companies which are
also often home businesses run by women. There are patterns for preemies
through size 12 children, and some adult patterns. There are some wonderful
outerwear patterns by a Canadian designer, including a one-piece snowsuit which
is exactly what I need for my 5-year-old daughter! Christening layettes, play
clothes, accessories, gift items, baby carrier, bibs, fabrics, etc.
The catalog is free by calling 1-800-249-1907.
Mary
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Wed, 06 Dec 95 18:11:44 EST
Subject: Re: 100 Needles
I faxed a request for a catalog - and got a 4" thing full of every
sewing machine part made since the ark! There are needles in there -
but having the serial # or whatever must be the secret - because I
can't figure out WHAT needle to get! Can someone out there help???
Cheryl
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Wed, 6 Dec 95 19:36:53 EST
Subject: Re: Bernina Digest 12/5/95
Hi Patches!
I missed the original note on the challenge idea, but think I have pieced
together the main idea. I am more interested in the different ways I can
use my machine than on many of the discussions surrounding dolls and fabric
shops, etc. I am a brand new owner of a 1090S and haven't yet tried all the
features but expect to with each new project.
I would love to be in on the challenge and would especially like to know how
the others utilized their Bernina features in the challenge.
Jan D
p.s. Patches- do you have a real first name?
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Wed, 6 Dec 1995 16:53:26 -0800 (PST)
Subject: Sewing for others
Linda:
I know the feeling! I used to feel guilty about saying "no" when asked to
sew or knit for acquaintences or co-workers, but like others, I soon found
myself doing nothing but "favors" for people that were taking all my time.
My solution was to catagorize the requests: family, close friends,
co-workers, etc. on out. I said no to those who weren't in my close circle,
and for the others, I asked them to barter, hour for hour, something they
could do for me in exchange for my sewing or knitting for them. It works!
The serious ones will follow through and come up with something to barter,
and the others will forget what they needed/wanted sewn or knit.
Of course, I still sew for gifts for those who understand and appreciate
what it means to have something I made because for me it represents the love
that I feel for them.
Hope this might help.......
Louise
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Wed, 6 Dec 1995 21:32:43 -0500
Subject: Re: Sewing machines
I strongly suggest you look at a Bernina 1260 or 1090 instead of the cheapy
model from Taiwan. Not only are the full-line Berninas better made, they
will hold their value much better than the other. Something like the
difference between a Justy and a BMW. If money is a real factor, look into a
used Bernina 930 or 1230, both built extremely well and very reliable
machines that a joy to use (this comes from a quilter/garment maker).
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Wed, 6 Dec 1995 21:56:44 -0500
Subject: Sewing machines
Confused husband
Want to put in my 2 cents worth and suggest that you NOT get the Bernette.
While it is o.k. for general sewing, I don't think it would hold up very
well for quilting, especially for freehand. I formerly worked for a Bernina
dealer and sewed on these machines and the Berninas every day. I would
suggest one of the lower end Berninas such as the 1000, 1001, or 1031. They
are all mechanical. The entry level computer machine, 1080, is usually lower
priced than the 1031. Also, consider getting one that has the knee-lift. It
more than pays for itself in doing freehand quilting.
Barbara
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Wed, 6 Dec 1995 21:56:48 -0500
Subject: serger looper threaders
Kay
Go to the local drug store or Wal-mart and buy a package of dental floss
threaders. They are a little larger than the looper threaders, but are the
same shape and work on most sergers. I have used it on both of my Bernies.
Won't work in the needle, only in the looper. Also, they are blue so they
show up a little better on the carpet
Barbara
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Wed, 6 Dec 1995 21:32:49 -0500
Subject: Re: Sewing for others
Get some business cards made, quote a price, and go for it. I think you'll
find charging for your time will not only make your hobby tax deductible, but
will discourage casual requests.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Wed, 6 Dec 1995 22:12:05 -0500
Subject: Re: Sewing machines
George, I would hate to give up my knee lifter for the presser foot. It is
like having a third hand. For machine quilting, the needle down option is
great. I know the machines with these features are more expensive, but well
worth the price. I know price ultimately has to play an important part in
the decision, but I would recommend checking out the features offered. Judy
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Wed, 6 Dec 1995 23:38:46 -0500
Subject: Fabric Weights
Regarding the discussion of rotary cutters &pattern weights:
Olfa makes weights (called O Weights) with small "tacks" on the bottom that
prevent the fabric and pattern from sliding around while you're cutting.
They work great for me and are much better than the homemade ones!
-Sylvia
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Wed, 6 Dec 1995 23:43:43 -0500
Subject: Re: Clotilde
I too order from Nancy's Notions and have for many years. Never have I been
disappointed. The order is always there within four or five days. I agree
what does all that junk in Clotilde's catalog have to do with sewing?
Amazing!
Jan
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Thu, 07 Dec 1995 00:14:06 EST
Subject: Sunbrand #
Sorry I posted the fax #.......The real # is 18002416800. Also, did
you know that you can call 18005551212 free of charge to get any 1800
# in the U.S.?.............Sorry again, good needle shopping....Roxy
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Thu, 07 Dec 1995 00:21:27 EST
Subject: Sunbrand Phone #
Sorry I posted the wrong #. I thought i had reposted but could have
tacked it on to a older digest???
anyway, the # is 18002416800..........Good luck...Roxy
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Thu, 7 Dec 1995 01:05:24 -0500
Subject: Re: 100 Needles
The phone number for Sunbrand is 800-241-6800.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Thu, 7 Dec 1995 01:05:25 -0500
Subject: Re: Sewing machines
Hi George - Your wife may be frugal, but this is a gift, right? Get her
something more than she would ask for, and go for the genuine article - you
just can't beat the stitch quality and convenience of a real Bernina, not to
mention the warranty. She might be happy with basic transportation, but I'll
bet she'd love a few of the "creature comforts" like the knee lift and
automatic buttonhole. Linda
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Thu, 7 Dec 1995 01:29:56 -0500
Subject: Sewing bee
> I wonder if anyone would be interested in
making an online vest or jacket, or even a wallhanging doing the things we
are learning about our bernies
COOL!!! I vote for vests!
> Am I dreaming, or what do ya think.....
Patches, "We'll be in your dream if you'll be in ours!" :D
Sylvia
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Thu, 7 Dec 1995 01:29:49 -0500
Subject: Rotary cutting
> It's been awhile since I've done any non-quilt type
sewing &was wondering how many people out there rotary cut their clothing
patterns.
I use those big, yellow OLFA cutting weights and rotary cut patterns (Jo
Anne's Fabrics had them at 50% off!!). I use the small cutter on tight, curvy
lines and the big one on long, straight lines. I am so happy to be able to
eliminate pinning!
> How do you cut something if it's bigger than the cutting mat? My mat is
only 18x 24 &I just can't afford the really big mat till after the X-mas
birthday season.
I have two big mats (and a table that can fit both at the same time) and an
18x24. But then I only have one feathered child and on furry child - and they
both think that a walnut is a great present!! :D Before I got the second
mat, I believe that I once cut by doing a little pinning and then carefully
sliding the mat under the fabric as I went.
Sylvia
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Thu, 7 Dec 1995 01:30:06 -0500
Subject: Favors
> Is anyone else out there bombarded by requests from non-sewers for
"favors"?
I haven't been, but if I were, I would suggest a barter - their talent (or at
least "elbow grease") for mine. To do otherwise (except as a present) is to
suggest that your time is worth nothing. Of course, you could always charge
standard rates.
> I don't have a problem saying no to strangers, but it is very difficult
with people who are in your circle.
Repeat after me: NO. No. No. No. I have my own life. No. No. No.
> At a party over the weekend, a new neighbor who heard that I sewed, asked
me to make curtains for her. I put her off until the new year...
CURTAAINS!!?? What gall! She doesn't even KNOW you! You will find that when
you start standing up for yourself, the unfair requests will dwindle to
nothing. Heck! The Welcome Wagon person probably told this new neighbor, "Oh,
and if you need ANY free sewing done, just call Linda!
Sylvia
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Thu, 7 Dec 1995 07:34:35 -0600
Subject: Serger Threader
>
>I have a question concerning accessories that come with the serger. I have
>lost the little serger looper threader that comes with the machine a couple of
>times and that darn little thing costs $2.50 to replace. If you drop it on the
>floor it is gone. It blends in with the carpet and is hard to find. Is
>there any
>place where I could just purchase several of the threaders at a much cheaper
>price?
>
Kay:
Have you tried to use dental floss threaders? They are plastic, but should
work for you.
Carol C
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Thu, 07 Dec 1995 08:54:01 -0500 (EST)
Subject: Bernina for sale
Hi,
I sent a message a week or so ago about a Bernina I have for sale. Somebody
told me that you send stuff out snail-mail to subscribers and all I included
was my email address. I'd like to repeat the message but include my phone #.
Hope that's okay!
For sale - Bernina Industrial sewing machine. Model 217N. In excellent
condition. Does lots of fancy stitches and embroidery. Includes a heavy
duty work table. $1000.
Also a Siruba Industrial Serger. Model 512M. 4 thread. Excellent condition.
Includes heavy duty work table. $800.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Thu, 7 Dec 1995 09:25:48 -0500
Subject: looper threader
Kay - the little wire threader for the serger is for threading the needles.
Use your Bernina sewing machine needle threader for the serger. It only costs
$1.50 to replace and it doesn't get lost or broken as easily as the serger
wire one. To thread the loopers, use a floss threader. You can buy a bunch
of them for very little at the drugstore or grocery store. Hope this helps!
Are there any tricks to making yoyos with the circular attachment? Do you
need a hoop? Do you cut out the circles first? Please explain.
Francyne
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Thu, 7 Dec 1995 14:44:41 GMT
Subject: Re: Sewing machines
George, another note...for quilting the knee lever is a God-send and is
available for the 1001. The 715 is not all metal by the way and neither is any
Bernina. They all have at least 1 nylon gear and some plastic in the
housing--all however have excellent warranties. Holly
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Thu, 07 Dec 1995 10:37:55 EST
Subject: 1530, and Mary Lou Nalls Books
Hi All!
I have been a very silent lurker since this list started up, but I know it is
time to thank you all for the wonderful information you have been giving me!
What a treasure!
I just upgraded my 1090 to a 1530 this past weekend (got a great deal and they
threw in 28 spools of Mettler thread and needles), and am looking for any 1530
specific tips you have to share. I am an avid quilter and am easing into doll
making and sewing clothing, if that helps.
Also, I recently called Clothilde to order three of Mary Lou Nall's books --
Foot Book, Foot Book 2 and Just Needling. Clothilde told me that while they
could send me the first Foot Book and the Needling Book that Foot Book 2 was
discontinued. Can someone point me to a source for that book? I really want
it. Do you have any other ideas for printed resources (other than Know Your
Bernina and Step by Step)?
Thanks in advance for your help, and keep up the great talk!
Barbara B
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Thu, 7 Dec 1995 15:14:19 -0500
Subject: Re: Various comments &questions
Kay-
A much cheaper and more visible serger threader is the plastic dental floss
threaders available right next to the dental floss at the drugstore. One box
of a dozen is probably less than $2.50 and will last forever unless you have
blue carpet.
Lois
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Thu, 7 Dec 1995 16:14:27 -0500
Subject: Re: Options other than a foot pedal
>Once, when I had foot surgery, I taped the foot pedal to the side of my
>machine with duct tape and used my knee to press it. I left it there
>until I ran out of duct tape, replacing it, and was too lazy plus kept
>forgetting to get more duct tape, so returned it to the floor. But...it
>did work great taped to the leg of my sewing cabinet.
Peggy,
Cool idea, I like that........wouldn't that be fun, even if you hadn't had
the surgery, I must try that, ingenious.
Patches
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Thu, 07 Dec 1995 16:12:24 MST
Subject: RE: Rotary Cutters
I cut across the notches and then snip with my scissors...I also use
those coloured adhesive dots to mark important pattern markings.
Sandra
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Thu, 7 Dec 1995 20:52:14 -0500
Subject: American Girl Dolls Update
Well, another positive comment on American Girls dolls. If anyone remembers, I
was the one who had ordered the dolls and put a 2 day rush on the order. One
was backordered until 12/19 and the other did not arrive as scheduled.
Update: I called Pleasant Company at approx 0845 Friday morning 12/1. They
lived up to their name and were very pleasant, explained the doll had been
shipped 11/28 via Airborne Express and would be at my home prior to 5pm. Molly
arrived at 10:45am!!! Daughter #1 was very excited to see her and has played
with her non-stop. The amazing thing is that she is also letting daughter #2
play with Molly also. These dolls must breed cooperation!
On 12/5, there was a package on the porch when the girls got off the bus; the
Girl of Today that was backordered until 12/19 had arrived! Wow, was Daughter
#2 excited!
Just wanted to say these are nice dolls and the company seems to be a good one.
BTW, was in Crown books today and picked up 2 of the Girl of Today activitiy
books that were advertised in the catalog. I had not seen them in any other
bookstores yet.
Michele
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Fri, 8 Dec 1995 00:58:59 -0500
Subject: Re: Rotary Cutters and notches
I never cut out notches. I go back and mark them with a marker (chalk, wash
away pen, soap, etc.) before removing the pattern from the fabric. I find
marking far more accurate and it does not weaken the fabric.
Francyne
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Fri, 8 Dec 1995 01:01:31 -0500
Subject: I got a 1230!!!!
Hello everyone! I am the proud (and excited) owner of a Bernina 1230. I
decided to go with the 1230 for awhile, and then maybe upgrade to the 1630 (I
think I'm going to keep the 1230 even if I do decide to upgrade). Any tips,
ideas, pointers, etc., please feel free to send my way!!!
Michelle
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Thu, 7 Dec 1995 21:39:39 -0800 (PST)
Subject: quilting polarfleece??
I know nothing about quilting, except that I don't really think I am
interested in it beyond it's wearable art potential...having said that, I
do have a question.
I just got a huge amount of polarfleece to make robes and slippers and a
horse blanket, etc for Xmas giftts. What I want to know is, has anyone
ever strip-pieced or quilted polarfleece fabric scraps? I envision having
a lot of leftover fleece, and I have also envisioned a strip-pieced vest
with a sport zipper for wearing when I am riding my horse. Any ideas?
might just try it anyway...
Chris
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Fri, 8 Dec 1995 03:44:25 -0500
Subject: Circular Embroidery Attachment
Hi, several of you have mentioned the Circular Embroidery Attachment. I
have a great angel pattern done with this attachment. If you would like the
pattern I'd be glad to send it to you. Happy sewing.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Thu, 7 Dec 1995 23:55:20 -0800
Subject: Re:
Very funny. I've never thought of that. I've had some very taxing projects
that I've sewn for "friends" and could kick myself for doing it. I wound up
not having a Christmas shirt last year because I was helping a friend and
had not time left. I could really use a good carpet cleaning in here.
Hmmm. Anyone need some mending done?
This group is great. I've learned a lot just by reading the mail every day.
I was encouraged to buy a 1030 by the costume shop of San Francisco Ballet.
I love the machine. It is tooled perfectly, so when there are big screw-ups
they are mine and not the machine's (drat).
My best to all of you,
David B
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Fri, 8 Dec 1995 04:34:52 -0500
Subject: Free-hand monogramming
Debra,
In response to your question about monogramming with your 1090s:
You can do some nifty lettering using your zigzag stitch with your FEED DOGS
LOWERED. I took a class @ my local Bernina shop last year--what you do is
put your fabric in an embroidery hoop (around 5" diameter), put some
tear-away stabilizer underneath (it doesn't have to be hooped), lower your
feed dogs, and set your zigzag width to about 3. Then you draw the letter
you want onto the fabric with a fabric marker and slowly stitch following
your marking, all while moving the hooped fabric to follow the marking.
I think of it as using the machine stitch like a calligraphy pen. It does
take some practice, but the results are worth it! You can also
simultaneously widen or narrow your stitch with one hand while you move the
fabric with the other--this REALLY takes practice!
In the class, we learned how to do lots of different lettering styles--as
long as you can draw the letters on the fabric, you can stitch them! You can
also trace the letters onto Solvy (clear water-soluble stabilizer) and sew
over that. I hope this is helpful!
-Sylvia
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Fri, 8 Dec 1995 21:43:52 +1100 (EST)
Subject: Re: Sewing for others
Linda. I fully understand your problem when people ask favours to
sew. In my old age I have the courage so politely say NO, and then reverse
the question and ask "Don't ask me to do something I dislike doing "- like
fixing hems etc, I am a sewer but I love the creative part of sewing and not
the fixing hems and repairs etc. Lately I don't get many requests.
Carmella
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Fri, 08 Dec 1995 09:04:35 EST
Subject: Rotary Cutters
Esther:
There are notch paper stick ons out there that might be easier for
you to use. That way you could just cut the notch right off. After
you have cut your pattern out you go back and place a notch stick on
where you would have cut out the notch. You can order these from
Nancy's Notions. They might also be available in your local fabric
store.
Another method is to cut the notch right off and after you have your
pattern cut out go back and cut a small slit in the seam allowance to
mark where the notch is. This is the method that I use and I find
that it works quite well.
MERRRRRRRY CHRISTMAS to All!!!!
Lorna
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Fri, 8 Dec 95 14:18:00 UTC 0000
Subject: ... no subject ...
Sharon,
I really like your barter idea! Just tell them, "this job will take me x
hours. I'll need for you to do that I won't be able to do while I'm
doing your work". People who don't sew think we can just whip this stuff out
in no time. Besides, they have a tendency to just dump it and run -- out of
sight, out of mind.
Guess I've been lucky. Most of the people who have asked me to do sewing are
single guys I've worked with. I tell them up front that I don't do
alterations, even for myself. When they've paid me, they've given me more
than I would've asked for.
My husband has a female cousin who is a mooch and a cheap one to boot. I've
learned to say no to her. Recently she wanted to use my Deco 500 to make
some towels to give her kids at Christmas. She doesn't really sew, but she
figured she could handle this. I told her she could use it only when I
wasn't (and showed her the stack of towels and stuff waiting for me to do),
and that I'd keep a tab of the supplies she used and she'd have to pay me
for them. I was really dreading even having her around. After I mentioned
the "pay" word, she went home and ordered a Brother embroidery machine. Then
she tried to "borrow" Solvy from me when she found out how expensive it is,
and bobbin thread when she was told not to use the sewing thread she has on
hand. I told her I couldn't spare it and can't get it around here and just
gave her the mail order numbers. There was a time when I would have let her
use me, but guess I got burned too many times. She's not one to ever return
a favor.
When people ask me to sew, usually, I just set a price. Then they can decide
if they still want me to do it or not. When my kids were little, I took in
sewing so I wouldn't have to put them in daycare and work in an office, but
that's been 25 years ago. Now that I'm older and gutsier, my philosophy is
that I haven't spent the better part of 40 years (not to mention thousands
of dollars on machines) learning this craft just to give it away.
It's hard to be strong the first time or two, but comes easy after that. :)
Petchy
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Subject: Re: My first class!
>
>And, what is a "black-case bobbin"? I kind of got the
>idea that it's got a more loose tension for thicker,
>decorative threads. How do you use it? Does it fit in
>the spot where the regular bobbin does? Is it expensive?
>
>Thanks,
>
>Debra
Debra,
The black latch thread is used for the thicker decorative threads as you
mentioned. You can also make shirred clothing using elastic in the black
latch bobbin. Also, you can do Sashiko by machine which is very pretty
embelished on clothing, particularly vests. The down side to the black
latch bobbin is that it retails for about $50.00, very expensive unless you
would do a lot of decorative work and could get your money's worth. It
has been suggestion on this list before that you purchase an extra regular
bobbin case which is less expensive (about $35) and adjust that. You don't
want to fool around with the one that comes with your machine. Also, if
you don't want to pay that much you can wait til your dealer has a 20% off
sale. My Bernina dealer gives 10% on Bernina Club day and occassionally
has a 20% sale.
On other sewing techinques using your machine, I suggest any of the Mary
Lou Nall books. She has written about 6 or 7 books that cover every aspect
of your Nina.
Merry Christmas and Happy Sewing,
Kay D
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Fri, 8 Dec 1995 10:27:50 -0500
Subject: Re: Sewing Machines
I agree!! I had a Bernette 330 that is made in Japan as opposed tmy new Swiss
made 1080, which by the way I am in LOVE with! I can't believe the
difference, it is the best move I made!!
Karen
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Fri, 08 Dec 1995 10:16:31 CST
Subject: Recipe for cheese ball
Hi!
I forgot who posted the cheese ball recipe in Nov, but thanks!! My family
loves it. And in return - a quick recipe -
PEPPERMINT FUDGE
12 OZ peppermints (unwrapped and pulverized in food processor)
1 pkg almond bark/white coating stuff (melt in microwave, stir a lot)
After melting the white stuff, stir in the crushed mints. then spread
thinly on waxed paper. Let cool break into pieces and ENJOY!! My kids help
me make this and give it to their teachers. It's also good with Spearmints.
I know this isn't a cooking group, but this is an easy recipe that let's
you get back to the important stuff --SEWING AND QUILTING!!
Hope you will like it!!
Lyn
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Sun, 03 Dec 1995 12:16:37 -0500
Subject: Re: 1090 Lurches along! Help!
> Suddenly my 1090 is lurching along rather than smoothly sewing. It
> seems to be a power problem, perhaps in the foot control??? Has
> anyone else had this problem? How was it solved?
>
> Have you double-checked your plug connections into the machine from your foot
pedal and from the power outlet to the machine. Sometimes
they wiggle loose. Also check to see if there are any kinks in the
cords or unusual worn spots on the wires. Good luck and I hope you
don't have a serious problem.
Nancy
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Fri, 8 Dec 1995 17:18:46 GMT
Subject: Re: 100 Needles
Cheryl, Send me a SASE and I will send you a terrific needle chart. The style
of needles used depend on what you are sewing. The standard household machines
use needles marked in one of the following ways: 15 x 1, HA x1, 130/705 maybe
even just 705 Schmetz makes the finest needles ever. Holly
Md. Sew and Vac.
8847 Branch Ave
Clinton Crossing Shoppping Center
Clinton, MD 20735
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Fri, 8 Dec 1995 16:20:44 -0500
Subject: Re: Bernina Challange
Jan,
yep, I have a real first name. I just don't use it.
all,
am capturing names of people who wish to participate in the challenge,
although, its not necessary, I am planning to just put the lessons on the
board, those who want to participate can, and those who don't, don't need to
worry about it.....
Patches
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Fri, 8 Dec 1995 18:10:59 -0500
Subject: Re: Rotary Cutters
I always cut through the notches and clip in about 1/4 inch with scissors.
It helps to mark centers for instance the same way.
Looking forward to a little cool weather. But I hear it's going to rain
Sunday. This always happens when I plan a holiday party. Oh well
Jan
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Fri, 8 Dec 1995 21:30:40 -0500
Subject: Re: Sewing for others
I remember once I made a slipcover for a friend in return for a week at her
lake cottage. It was worth the time. Slipcovers come easy for me. I mostly
sew for my children and grandchildren and of course me. I just plain say no,
I don't have the time. Sometimes I enjoy doing something for someone else
but if I don't feel up to it say no.
Kit
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Thu, 7 Dec 1995 16:19:07 -0700
Subject: Re: Sewing machines
he suggested the Bernette 715, an all-metal
>machine made in Taiwan for Bernina.
>George
No NO NO-O-O. Get her a 1260 which is the best basic. Don't tell her what
it cost. Santa can have a few secrets. Do NOT get a machine built in the
Orient. It will no doubt work just fine...but it is the difference between
a Yugo and a Cadillac. Both get you there, but you enjoy the trip so much
more in the Cadillac! I'm sure she deserves it.
Nancy B
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Fri, 8 Dec 1995 17:13:31 GMT
Subject: Re: My first class!
Debra, Bernina has some great leaflets called sewing service and footsteps that
cover exactly what you asked. If your dealer does not carry them, get in touch
and we can send them to you. They are only $1 each and are very helpful.
Free motion embroidery is wonderful but something you must practice to do well,
the other "driven type" can be quite good also. The black latch bobbin case has
a slightly longer screw and you can make adjustments for peculiar threads or
effects without changing the factory set tension of your standard bobbin case.
Good luck and enjoy. Holly
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Fri, 8 Dec 1995 13:05:43 -0400
Subject: Re: 1090 Lurches along! Help!
Dear Judy and all:
I have a 940 Favorit that use type 290 pedal foot, mine broke (actually
the dealer repairman open it an mess it up). I paid $155.00 for that
pedal, so do not get surprise for an outrageous price, still recovering
from my heart attack after paying that amount. That is the price of
owning a Cadillac ( the older the expensiest). Hope you have more luck
and find a better price in the States.
Milagros
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Fri, 8 Dec 1995 17:27:02 GMT
Subject: Re: Help! Pooh
Peggy, I am new at this but my DH (I assume that that means dear husband) told
me that you need to be able to use "attachments" some packages allow for that
and others don't. Some servers don't. If you can send it ..not all will be
able to receive it. Good luck and thanks for trying. Holly
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Sun, 03 Dec 1995 12:25:18 -0500
Subject: Overalls for boys
Does anyone know of a pattern for boys overalls (size 10) that is
similiar to Osh Kosh designs?
Thank you.
Nancy Y
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Thu, 7 Dec 1995 21:56:56 -0500
Subject: Re: Rotary Cutters
Esther,
This is what I do.....I cut off the notch, then I go back, and make a slit,
that looks like this for a single notch
|/ if its a double notch, I do this \/\/
you figure if you are doing a 5/8" seam allowance, you have plenty of room
in there to cut those babies.......doncha hate notches, but without them,
we'd be in trouble.....
good luck,
patches
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Thu, 7 Dec 1995 21:56:54 -0500
Subject: Re: 1090 Lurches along! Help!
>Suddenly my 1090 is lurching along rather than smoothly sewing. It
>seems to be a power problem, perhaps in the foot control??? Has
>anyone else had this problem? How was it solved?
Judy,
right now, I have the same problem, what happens is it seems that the power
shifts to faster and slower, is that right......
It is definitely in the foot control, and you need to take it to your
dealer, what they will do, is give you a replacement, then send yours to
bernina to be fixed, I have had this happen for a second time now, I use my
machine so much, I wear the foot controls out........hehehe
its covered under warranty, so no need to worry about paying, usually takes
about 3-6 weeks for the fix, my dealer just gives me a replacement to use
until mine comes back.
take care,
patches
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Thu, 7 Dec 1995 22:12:23 -0500
Subject: Re: Rotary Cutters
I never have cut out the notches, I just clip in the seam with the rotary
cutter.
Kit
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Thu, 7 Dec 1995 21:56:57 -0500
Subject: Re: Sewing for Others-offended
I think I am offended, nobody, ever asks me to make something for them, hmmmmm,
With relatives, ya know, I just never know, whether they like it or not.
Last year, I gave mil a set of placemats, (she is so hard to buy for) and
she calls on the phone, raves about how beautiful they are, and then
proceeds to tell me, how much better I have gotten........teehee......then I
proceed to tell her to thank dh, he let me buy a new machine......I always
blame it on the machine and when I started selling quilted gifts, she seemed
genuinely surprised, that people would want to buy that kind of
thing......then there is my stepmom.....she loves everything I do, and when
she says thank you, I know she truly means it. Of course, she isn't making
the comment about how much better I've gotten, instead, she asks me how to
do it.....then there is my mother, whom, I have given everything from purses
to wallhanging to decorative sweatshirts, she says, "oh honey, thats nice"
then she takes the wallhanging and stuffs it in a box somewhere and tells
me, whele I am on the move so much, there is never any place I can hang
it......should I tell you about my sister?
Of course, all of my friends sew, I don't believe I have a single friend in
the east that doesn't sew. So I will leave that as my excuse, all my
friends sew, and that is why I never get asked, (yes, I feel better now)
I advertise in the newspaper for sewing alterations and repairs, and people
actually call and have work done, so I guess, all in all, it works out......
ya'll have fun with this discussion, I am enjoying it even tho, I was
feeling offended, but now, I feel better.......hehehe
Patches
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Fri, 08 Dec 1995 19:34:37 EST
Subject: Re: Sew baby!
Mary,
I'm delighted for both you and the Sew Baby! folks that things have
worked out so well. I feel the same way you do about supporting this
type of company, which is why I posted the information.
> Whoever posted the Sew Baby! information, if you will email me your
name &
> address...
Thanks for the thought! I'm at PO Box 158, Milton, VT 05468
I no longer sew much for kids, so I called them mainly for access to
the Kwik Sew patterns, of which I will be ordering several on Monday.
I like their quick service and friendly manner. Will call them in a
flash for supplies if more small children appear on my horizon!
Do you know they have a web site also? Can't remember if I posted it.
It's
http://www.prairienet.org/sewbaby/ Enjoy your holidays.... :-)
Peggy
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Fri, 8 Dec 1995 19:35:05 -0500
Subject: Re: Sewing Machines
This isn't really about the what machine to buy topic, but I had to ask if
anyone else was as amazed as I was last week while watching Porter and Fons's
quilt show on tv. They were making prairie points and while basting them
together kept stopping to lift up the presser foot BY HAND! Does anyone with
a Bernina NOT use the knee lift?? I think it's one of the most wonderful
features and one I would highly recommend to anyone buying a machine. I've
been making Christmas things to sell and every day I'm so thankful I own a
wonderful Bernina - it's a great machine. Sue M.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Subject: Nancy's Notions
I received a postcard in the mail yesterday from Nancy's Notions about a
limited time shipping offer. If you order by December 20, 1995 with discounted
merchandise totalling $25.00, you pay only 95 cents in shipping. Here's ho;w
to order: Write 25RP11 on the SC# line of your order form, or tell the operator
SC#25RP11 when you call in your order. Offer does not apply to previous
orders. Nancy's Notions toll free number is 1-800-833-0690.
I also order from Clotilde. I have been reading that a lot of people are
disappointed with Clotilde. While I have had no problems in my orders like
some people, I too do not like all that imported junk she has been putting
in the
catalog that has nothing to do with sewing.
BTW, thanks to all who have given me suggestions on looper threaders.
Someone told me I could order a pack with several enclosed from Nancy's
Notions.
I have one more question. I have been a Bernina for years but there is one
thing that I don't understand about my machine. What exactly is a DC
motor? The only thing I know is that Berninas have DC motors and some of
the others don't. I would think that the DC would make the Bernina a better
machine.
Kay D
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
ate: Sat, 9 Dec 1995 06:04:04 -0800
Subject: Re: computer pooh
I have sent out all requests for the computer Pooh. Several have been
returned but I can not get address off these due to the size of the
files. If you requested one and did not receive it let me know.
Remember this is a big file (2.02 meg) It takes over an hour to send
each file out.
Peggy
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Sat, 9 Dec 1995 09:15:47 -0800
Subject: Re:
Greetings everyone. I read a listing about Winnie the Pooh patterns and
noticed that it was suggested to copy the McCalls pattern. Best not to
mention anything like that because it is indeed a copyright infringement.
Has this pattern gone out of print from the maker? If so, I believe it is
then public domain.
I just want to make sure you don't get into any trouble by innocently
helping each other with a sewing project. Copyright holders can be nasty
sometimes.
I hope I don't sound like a stick-in-the-mud. My best to everyone.
David B
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Sat, 09 Dec 1995 13:38:52 EST
Subject: Bernina Digest 12/5/95
I DON'T sew for other people at all and have become very polite yet
firm about it. I offer them the information of going to their local
fabric store for names of people who sew for others etc. I'll never
forget the time I agreed to sew something for a friend. 80 hours
later she had a 3 piece formal tuxedo style outfit better than
anything I have ever done for myself. She offered to pay but would
have flipped if I had requested the paltry sum of $800.00. Now I sew
what I want and sell them to others but I am in control..............
Good luck saying NO.........Roxy
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Sat, 09 Dec 1995 13:43:35 EST
Subject: Bernina Digest 12/5/95
Sunbrand # 1800-241-6800.............Sorry if this is a repeat. I
saved this message and don't know if I responded or not. Thanks,
Roxy
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Sat, 09 Dec 1995 14:48:53 EST
Subject: How to order needles
On your Bernina machine your needle system is stamped on the door to
the bobbin case (or somewhere close around there) If not check your
instruction book as it will tell you what type of needles you need.
My Bernina 1130 takes a 130/705H. If you have a question about size
the staff is very helpfull in assisting you. check on page 155 :for
household, in your Sunbrand catolog. These are packed in lots of 150
at tremendous saving. (I have several commercial machines in which I
order in lots of 100 for 15.00) . I'll call and get the price on the
150 on monday as I have to order for myself for my new 2000dce (I
love it). Also if you look through the catolog you will find great
things. Teflon sray which I use to coat some of my pressor feet for
leather work. Or the teflon pressor sensitive tape which I cit out to
apply directly to my pressor feet. All kinds of rulers. Spray on anti-
fray liquid. Pump can anti-fray liquid (both about $7.oo for 20-24
oz). etc, etc etc. All at greatly reduced prices. I am in no way
associated with the company but use them frequently for a lot of
sewing supplies which are used by commercial sewers and can open up a
whole new world to the home sewer........Thanks Roxy
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
te: Sat, 9 Dec 1995 15:04:13 -0500
Subject: Re: My first class!
>exciting: I learned how to take my bobbin case out to clean;
>I learned about blind hems (eek! seems incredible, but I didn't
>know you could make those kinds of hems other than by hand!);
>did a lapped seam on terry-cloth; &learned why not to use
>cheaper thread. I also learned how to do the satin stitch for
>applique--I tried making letters out of the satin stitch, too:
>I spelled CAT.
Congratulations Debra, isn't it great to learn all of these wonderful new
things about your machine.
>monogramming--either in block letters (like I tried) or
While I haven't done this myself, I have just received a sample on how to do
this from one of my online services where the first stitch sample for us to
try was just mailed out, and this is what she chose to teach us.
I will practice it, and let you know how it goes.....planning on doing this
tomorrow.
>And, what is a "black-case bobbin"? I kind of got the
>idea that it's got a more loose tension for thicker,
>decorative threads.
Debra,
you are indeed correct on your guess about the black latch....It is used in
exactly the same way that you would use your other bobbin case. It costs
about $55.00. another normal bobbin case, would cost you around $30.00. I
always recommend that people purchase a second normal bobbin case, and
adjust the tension themselves. The ONLY difference in this case is that it
has the black latch, so that you can tell them apart......that is the ONLY
difference.
Paint some fingernail polish on the one you will use for adjusting the
tension, you can tell them apart that way......
Some have said, that the screw is longer in the black latch, and that is
simply not true.
Good luck to you, and can't wait to hear what you learn in your second class.
Patches
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Sat, 9 Dec 1995 19:57:32 -0500
Subject: Re: Bernina Challange
Patches, I'd be interested in the challenge too!! Paula
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=
Date: Sat, 9 Dec 1995 20:22:14 -0500
Subject: Re: Sewing for others
>"Another thing I find that keeps me from doing my own stuff are some of the
classes I have taken. Probably just an idosync. on my part, but I sometimes
feel I am doing someone else's idea, pattern, whatever and then all the ideas
I have for my "own" stuff gets put off."<
Add my name to that list also. I love to take classes to learn new techniques
but I find that I get bogged down in projects that I wouldn't have chosen
otherwise. That's why I prefer "technique classes" rather than "project"
classes. I can make a sample and then later incorporate the technique into my
own project. Hmmm - I'll have to give this problem some more thought!
Francyne
Bernina Page * Main Quilting Page